The Seal and Logo Request Thread

[Esbana]

could you make like this emblem for me ?
http://oi65.tinypic.com/14y3fgm.jpg

[Daunlaund]

could you make like this emblem for me ?
http://oi65.tinypic.com/14y3fgm.jpg

This ok?

[Almonaster Nuevo]

-•__•- wanna keep this relevant not being pushy, pls tell me if your not gonna do it. If your not sorry for wasting your time.

Yeah if it’s too much hassle don’t worry

Thank you for your patience.

[Daunlaund]

Yeah if it’s too much hassle don’t worry

Thank you for your patience.

Thanks so much

[Brusseldorf]

Greetings flag/seal creator demigods:
I have a request. Could I have a shield containing my flag, supported by 2 dragons and the words 'People of Iron Will' Written above in this script:

([url=https://image.ibb.co/dr4Gqp/983_FFD22_419_D_4028_B4_C2_1756783_F1575_1180_000002_DF79_EC37_D3.png]Image)[/url]

My most sincere thanks.

https://i.imgur.com/YL5J4om.png

[Almonaster Nuevo]

Dear Flag/Seal/Logo Creator-Gods,

I’d like to kindly request a coat of arms, if that is fine. I would like the main part be a shield of this design, with my flag being placed within the shield. I’d like the shield placed upon the bottom of this, with a bear and a moose/elk (whatever works) on either side of the shield.
Floating above the shield will be the northern star.

Thank you for your time.

My sincere apologies for the bump. This was poster nearly a week ago, and I feared it might’ve gotten buried.

[Sarcana]

My sincere apologies for the bump. This was poster nearly a week ago, and I feared it might’ve gotten buried.

As always, that is damn gorgeous. My thanks.

[Draos]

if I may make an Alteration to my request may I? well to be honest I realized mine was rather lacking in details. If I may I would like a Bullet bottom shield with a green background and a Red St.Andrews cross with a Elephant head on the Foreground looking menacing if that's not too much trouble

I apologize for the bump.

[Brusseldorf]

if I may make an Alteration to my request may I? well to be honest I realized mine was rather lacking in details. If I may I would like a Bullet bottom shield with a green background and a Red St.Andrews cross with a Elephant head on the Foreground looking menacing if that's not too much trouble

I apologize for the bump.

Sorry about the wait, you request got buried
https://i.imgur.com/YSOe10N.png
Hope you like it!

[Draos]

I apologize for the bump.

Sorry about the wait, you request got buried
https://i.imgur.com/YSOe10N.png
Hope you like it!

Thank you very much it looks great

[Ironspire]

Greetings flag/seal creator demigods:
I have a request. Could I have a shield containing my flag, supported by 2 dragons and the words 'People of Iron Will' Written above in this script:

([url=https://image.ibb.co/dr4Gqp/983_FFD22_419_D_4028_B4_C2_1756783_F1575_1180_000002_DF79_EC37_D3.png]Image)[/url]

My most sincere thanks.

https://i.imgur.com/YL5J4om.png

Absolutely wonderful, but could the background be white, and the letters and dragons black please?

[Borinsa]

How about an emblem based on the seal on my flag, and a raven, and my motto

[Kriiv]

Hello,

I would like to request a coat of arms for my nation. I generally want a shield (it can be any shape that fits well) that includes the star on my flag on a white background and is held by a wolf (on the left) and a red deer (on the right). The last detail would be a completely straight ribbon at the bottom saying, 'Strength is key' in capitals.

Thanks!

[Megelan]

I need a coat of arms for my country; I have a RL model for it, but there's no usable picture of it anywhere, all there is are photos:

[Khytonya]

I need someone to create a logo for my national football team. Like this one!

Execpt you have to replace:

1. The eagle in the middle with the head of the an angel (preferably a female).
2. The ball with the sun in my coat of arms.
3. The words 'KHFC' with 'RFFK'
4. Add the founding date of 'EST. 1901' underneath the logo.
5. Everything should be coloured in light shade of blue with navy blue trimming.

Oh and put a crown on top of her.

-New section, new bump-

[Esbana]

could you make like this emblem for me ?
http://oi65.tinypic.com/14y3fgm.jpg

This ok?

thank you so much Daunlaund, I will pick it

[Balnik]

Hi there.

I'm looking for an exotic sort of car company logo using something like this. https://imgur.com/a/lDHxrWx

I've been musing on it for the past while bit I just can think of anything, Can someone help me out? The name of the company is Vrlo-Bogat A.V if anyone wants that.

[Christ Triumphant]

If I may, I have a slight meta-question for those creating these seals and logos:

What do you use to create these images?

I've been slowly teaching myself Inkscape, and can get by enough by cobbling together the bits I have picked up so far. I have only the vaguest of notions for how to use vectors...I can source vector images, perform basic manipulations on them, and create bitmaps from some other images, but my effectiveness is quite hit-or-miss.

Do you have any advice or tips regarding the creation of images, or recommendations for other ways to tackle the task?

Thanks for any help you can provide at all.

[Tjorl]

Can I have a shield divided into 2 halves, one with an orca (background is blue) and the other with a lynx (background is red)? Straddling the vertical line in the middle is a yellow star and a scroll in the bottom says Audentes Fortuna Iuvat. I hope someone can do this and I hope this isn't a tall order. Also it says Den Demokratiske Republikken Tjorl at the top.

ORCA
LYNX
SHIELD

[Brusseldorf]

If I may, I have a slight meta-question for those creating these seals and logos:

What do you use to create these images?

I've been slowly teaching myself Inkscape, and can get by enough by cobbling together the bits I have picked up so far. I have only the vaguest of notions for how to use vectors...I can source vector images, perform basic manipulations on them, and create bitmaps from some other images, but my effectiveness is quite hit-or-miss.

Do you have any advice or tips regarding the creation of images, or recommendations for other ways to tackle the task?

Thanks for any help you can provide at all.

The internet seems to swear by inkscape but I can't get the hang of it.. firstly I don't even know where the layers option is, or if they even have layers.
I use Gravitz

[Christ Triumphant]

If I may, I have a slight meta-question for those creating these seals and logos:

What do you use to create these images?

I've been slowly teaching myself Inkscape, and can get by enough by cobbling together the bits I have picked up so far. I have only the vaguest of notions for how to use vectors...I can source vector images, perform basic manipulations on them, and create bitmaps from some other images, but my effectiveness is quite hit-or-miss.

Do you have any advice or tips regarding the creation of images, or recommendations for other ways to tackle the task?

Thanks for any help you can provide at all.

The internet seems to swear by inkscape but I can't get the hang of it.. firstly I don't even know where the layers option is, or if they even have layers.
I use Gravitz

Ah great, thanks for the recommendation...I will check it out.

If you're using the term "layers" in the way I am thinking, they have a tab at the top called "LAYER" for raising and lowering objects in that way. Also, PgUp and PgDn are the shortcuts

[Khytonya]

The internet seems to swear by inkscape but I can't get the hang of it.. firstly I don't even know where the layers option is, or if they even have layers.
I use Gravitz

Ah great, thanks for the recommendation...I will check it out.

If you're using the term "layers" in the way I am thinking, they have a tab at the top called "LAYER" for raising and lowering objects in that way. Also, PgUp and PgDn are the shortcuts

Do you have a smartphone that you can use?

If you do, I recommend you to use the app called Logo Maker Plus. It allows you to create a logo in any way, shape or form. It can also use the pictures in the phone's storage file. You have the freedom to create whatever you want, including coat of arms.

Otherwise, Paint.net or Photoshop is still widely used.

[Christ Triumphant]

Do you have a smartphone that you can use?

If you do, I recommend you to use the app called Logo Maker Plus. It allows you to create a logo in any way, shape or form. It can also use the pictures in the phone's storage file. You have the freedom to create whatever you want, including coat of arms.

Otherwise, Paint.net or Photoshop is still widely used.

Very interesting...

I do have such a phone, though it is quite old now. But I will definitely check that out, as it sounds like it could be quite useful.

Thanks

[Khytonya]

Do you have a smartphone that you can use?

If you do, I recommend you to use the app called Logo Maker Plus. It allows you to create a logo in any way, shape or form. It can also use the pictures in the phone's storage file. You have the freedom to create whatever you want, including coat of arms.

Otherwise, Paint.net or Photoshop is still widely used.

Very interesting...

I do have such a phone, though it is quite old now. But I will definitely check that out, as it sounds like it could be quite useful.

Thanks

You're welcome!

[Sarcana]

Hello, could someone help me in creating a Discord server icon for my region?

I’d like this ship to be the centre-piece, with an ocean underneath it. Surrounding the icon, I’d like a simple circle.

Something similar to this, I suppose, only with a ship and not an island.

Thanks.