Nordica Arms

[Free Missouri]

Bullpup 12 Gauge Automatic shotgun with RIS System capable of receiving an M203 Underbarrel Grenade Launcher and an over-barrel bayonet

[Der Nordland]

Bullpup 12 Gauge Automatic shotgun with RIS System capable of receiving an M203 Underbarrel Grenade Launcher and an over-barrel bayonet

I will side mount the Bayonet, is that acceptable?

[Free Missouri]

Bullpup 12 Gauge Automatic shotgun with RIS System capable of receiving an M203 Underbarrel Grenade Launcher and an over-barrel bayonet

I will side mount the Bayonet, is that acceptable?

yes

[Der Nordland]

I will side mount the Bayonet, is that acceptable?

yes

We Must apologize, we could not find a bayonet that would stay on well, due to the under-mounted M203. So, we decided to basically attach a flash reducer that has a built in thing, for well, stabbing. We need to come up with a fancy name for that.

12 Gauge, 2 3/4 Inch shells
Recoil Operated Blowback
15 Pounds
Notes
-M203 Grenade Launcher
-Muzzle Human Breacher
-20 round Magizine

Sincerely, Jeff of Nordica Arms,
Federation of Der Nordland

[Mallaska]

Love it. How much will DPRs cost?

Well. Production rights on this PDR project would cost around 2 million
We are very thrilled that you love this!

Perfect. We'll buy the DPRs for $3 Million NSD, an extra $1 Million to go towards your company. The greatest thanks from the Mallaskan Armed Forces.

Best regards,
Field Marshal Matthew Baker

[Der Nordland]

Well. Production rights on this PDR project would cost around 2 million
We are very thrilled that you love this!

Perfect. We'll buy the DPRs for $3 Million NSD, an extra $1 Million to go towards your company. The greatest thanks from the Mallaskan Armed Forces.

Best regards,
Field Marshal Matthew Baker

Make sure to keep us in mind for your weapon designs. We have long business hours

[Free Missouri]

yes

We Must apologize, we could not find a bayonet that would stay on well, due to the under-mounted M203. So, we decided to basically attach a flash reducer that has a built in thing, for well, stabbing. We need to come up with a fancy name for that.

12 Gauge, 2 3/4 Inch shells
Recoil Operated Blowback
15 Pounds
Notes
-M203 Grenade Launcher
-Muzzle Human Breacher
-30 round Magizine

We Will buy DPRs for whatever price+$3,000,000 Extra, and will designate this in our military the M171

[Der Nordland]

So, you want the Shotgun and the DPR??

[Free Missouri]

So, you want the Shotgun and the DPR??

Yes

[Der Nordland]

Wonderful, 4 million NSD for the pair's production rights?

[Free Missouri]

Wonderful, 4 million NSD for the pair's production rights?

Yes, Proper funds are being wired as we speak

[Der Nordland]

Funds have been received. I hope they serve you well

[Sassinia]

We wish for a light assault rifle chambered in our special 6.56 Calibre. We would like it to have a design slightly similar to the Kalashnikov.

- Premier Arls Rever

[Der Nordland]

We wish for a light assault rifle chambered in our special 6.56 Calibre. We would like it to have a design slightly similar to the Kalashnikov.

- Premier Arls Rever

Sounds like an interesting undertaking.
Similar in what regards? Gas system or Looks?

[Karcha]

Greetings from Karcha, most honorable gunsmiths.

Me, the ambassador of foreign arms and ammunition for Karcha, has had a discussion with the honor bound emperor and would be pleased to make an order, if not more?

Our excellent but old APD-087 assault rifles are in need of replacement for the coming age and we are looking towards Nordica Arms to produce a fine weapon with no misfits.

We require an assault rifle with an appearance similar to the OICW XM29 assault rifle; bullpup configuration, a custom telescopic sight; caliber should be .300 blackout; 40 round magazine; recoil reduction system in the stock, a very good fore grip, 30mm grenade launcher and add other things that will make this weapon ideal, if you don't mind.

If this weapon impresses us, we will sign you a contract of $50,500,000 NSD and continue doing business with you.

Best regards
The emperor of Karcha and his ambassador of foreign arms and ammunition.

[Karcha]

If possible, we seek a couple of field reports concerning our new weapon. We also wish that you field test it before selling us the weapon.

[Der Nordland]

We will see what we can come up with

[Der Nordland]

This was one of our more interesting projects to say the least.
We think we can do a better job if we remake this in a standard form. Field Testing is showing that it is somewhat front heavy with the grenades loaded. There is only so much you can do with polymer, you need a lot of metal substructure for this grenade launcher
Caliber: .300 Blackout
Gas Operated Rotating Bolt
Semi/2 round Burst/Full Auto
Effective Range 600 Yards
Magazine Capacity shown, 80 Rounds (We adapted a series of LMG mags for this. We know that this makes it heavier, but we had hoped that it would balance it out, it helped somewhat)

Grenade Launcher
Recoil blowback
5 round magazine
We were able to easily link this to the custom scope you ordered, so smart rounds can be used.

Scope Magnification, Adjustable from 1x-8x


Weight
14 pounds unloaded
18.76 Pounds fully loaded with FMJ and HEDP
Note- We forget to put the suppressor in the image

Our honest recommendation, you give this rifle to your soldiers that are designated to to use grenade launchers or your shock troops. We would be more than willing to redesign this if you want all of your soldiers to have the grenade launcher. Our testers found that this rifle set is heavyweight contender. Although, the found it to be very accurate. The scope maintained a zero very well. Recoil was light.

Sincerely, Jeff of Nordica Arms,
Federation of Der Nordland

[Varijnland]

To Nordica Arms,

The Kingdom of Varijnland is looking for a single shot, breach loading rifle to take the .577 inch ball metalic cartridge. The Rifle should be a full length stock and must include a knife beyonet. We are looking for new designs of breach loading mechanisms and look forward to seeing what Nordica Arms can produce.

General Joost Van Der Heijmaal of the King's Guard.

I hope this pleases the King.
As I understand it, breech loading=Break Open.
This rifle breaks open right above the trigger.

Excelent! The break-open mechanism is unique and exciting and the King is very pleased with the design, he's even shot it himself. Thank you Nordica Arms for making this weapon, we wish to buy 15,000 to start with.

[Karcha]

"Not that you did a bad job, but can you make the gun more sleek looking, we noticed a lot of Parts around the muzzle and the areas around the scope and under it, and above the magazine."

"We want a clearer looking image so we have an idea of how we will use it properly."

"Salutations, gunsmiths of Nordica."

[Karcha]

Also, we will be giving you a image of how sleek we want the gun to be. It's the one above the ar-15.



Copy and paste in a new tab so you have a better picture.

[Tyrants]

Dear Nordica Arms,

We are currently looking to replace the arms of our Home Defence Force, and we would appreciate it if you would design for us an semi-automatic assualt rifle. It must fire 5.56x45mm NATO rounds and be fitted with laser sights. A version of this rifle with a under-mounted shotgun would also be appreciated. We shall discuss payment after your designs have been submitted.
Yours,
Gen. Henry Moorton, Head of the Tyrant Home Defence Force

[Sassinia]

Sounds like an interesting undertaking.
Similar in what regards? Gas system or Looks?

Looks. Also, we want it look like a more modern version of the AK, although different enough to make it unique.

[Sacheyenya]

Hail, and blessings of the gods, comrades of Der Nordland. We, upon recent events, find ourselves in need of an assortmant of lightweight weaponry that would be ideal for fighting in heavily forested areas, in the mountains, and in the most extreme of weather conditions (rain, mud, hail, heavy winds, or hellfire from the sky if need be). We have the money, if you can provide the equipment. We're looking for any number of side-arms, assault rifles, shotguns and sniper rifles. Thank you for your consideration.

[Genus Libertatis]

We are very impressed with the designs, and would like to purchase production rights to the designs. The Federal Republic will definitely be a future customer of Nordica Arms...

Fantastic!
Do you have anything in mind?
I am glad that these designs are going over so well.

Well, in point of fact, I do, as I RP this nation over a couple of decades. We could use:

A lightweight bolt action (in .308 as well) with a bullpup design (preferred, not essential) and a straight bolt pull (as opposed to a conventional bolt action). This will probably see use in trench warfare, and is from that era, so a bayonet and wooden stocks would be appreciated

A later incarnation of this same rifle with polymer stocks

Any sort of cool revolver-esque sidearm. It can be any design, really, but it's primary virtue should be that it looks cool. And is reliable.

Any solutions Nordica Arms could provide would be greatly appreciated. You have won a loyal customer here.