Status: LIMITED (More to come)
Welcome to the Prizyetsi Arms Manufacturing Division Storefront! The PAMD is a state-run arms manufacturing company meeting the needs of the Prizyetsi Military since the 15th of March, 2011.
The following products are already on the market, however it was deemed nescesary to compile them to single store front in order to maximise eficiency.
Any nation spending over NSD 1Bil will receive 20% off on the total order.
ANY NATION WISHING TO RECEIVE AN UPDATE FOR EVERY NEW PRODUCT, PLEASE ADD THIS REQUEST TO YOUR ORDER
Clients:
Yellow Zone 20-A
Volklandt
Laavi
Oceanic Vakiadia
Viktors
Katonazag
Dragovsk
New Posiedon
Grand Widerstand
Christantle
Samozaryadnyastan
Avorez
Dalam
Volklandt
Laavi
Oceanic Vakiadia
Viktors
Katonazag
Dragovsk
New Posiedon
Grand Widerstand
Christantle
Samozaryadnyastan
Avorez
Dalam
Total Income: NSD (re-counting)
FIREARMS
MR-3 Marksman's Rifle
MR-3S
MR-3C
Lenght: 1350mm/1150mm
Diameter: N/A
Weight: 6.00kg empty, 6.25kg loaded
Cartridge: 7.62 x 63 mm "Zastama"
Propulsion: N/A
Speed: N/A
Range:
MR-3S : 900m-1100m
MR-3C : 500m-750m
Launch System: N/A
Price: NSD 3750
DESCRIPTION
The MR-3 (Marksman Rifle-Model 3) is a response to the Prizyetsi military's need for a designated marksman rifle. It was designed on old but reliable NATO weapons systems, making the MR-3 an exelent field weapon. The MR-3 was chosen to be chambered in
7.62 x 63 mm due to the round's reliability and stopping power.
The MR-3 is designed to go anywhere the shooter can, albeit with modifications when dealing with extreme cold. The MR-3 is capable of firing from underwater, covered in mud or sand.
The "Zastama" variant of the 7.62 x 63 mm round, made by Prizyetsi Arms, is specially designed against body armor of class IV and under. It achieves this thanks to it's unique design. The bullet itself is molded around a nail-like rod with a flat point, which penetrates the armor at around 900m/s.
The MR-3 can also be chambered in 6.5x55mm, which uses a larger bullet.
The weapon comes with a bipod, scope, 2 magazines and supressor. Extra magazines cost NSD 45
WHY CHOOSE THE MR-3?
The MR-3 is an extremely reliable weapon and is extremely durable. The standard version (MR-3S) is accurate for the skilled shooter at reanges of up to 1100m, making this a good militia or urban warfare weapon.
MR-3S
MR-3C
Lenght: 1350mm/1150mm
Diameter: N/A
Weight: 6.00kg empty, 6.25kg loaded
Cartridge: 7.62 x 63 mm "Zastama"
Propulsion: N/A
Speed: N/A
Range:
MR-3S : 900m-1100m
MR-3C : 500m-750m
Launch System: N/A
Price: NSD 3750
DESCRIPTION
The MR-3 (Marksman Rifle-Model 3) is a response to the Prizyetsi military's need for a designated marksman rifle. It was designed on old but reliable NATO weapons systems, making the MR-3 an exelent field weapon. The MR-3 was chosen to be chambered in
7.62 x 63 mm due to the round's reliability and stopping power.
The MR-3 is designed to go anywhere the shooter can, albeit with modifications when dealing with extreme cold. The MR-3 is capable of firing from underwater, covered in mud or sand.
The "Zastama" variant of the 7.62 x 63 mm round, made by Prizyetsi Arms, is specially designed against body armor of class IV and under. It achieves this thanks to it's unique design. The bullet itself is molded around a nail-like rod with a flat point, which penetrates the armor at around 900m/s.
The MR-3 can also be chambered in 6.5x55mm, which uses a larger bullet.
The weapon comes with a bipod, scope, 2 magazines and supressor. Extra magazines cost NSD 45
WHY CHOOSE THE MR-3?
The MR-3 is an extremely reliable weapon and is extremely durable. The standard version (MR-3S) is accurate for the skilled shooter at reanges of up to 1100m, making this a good militia or urban warfare weapon.
Prizyetsi Assault Rifle Model 18
PAR-18A (Original)
PAR-18S (Standard)
PAR-18S (With buttstock collapsed)
PAR-18C (Compact)
PAR-18C (With butstock collapsed)
Lenght:
PAR-18A 1550mm
PAR-18S 1550mm
PAR-18C 1250mm
Diameter: N/A
Weight: 4.50kg empty, 4.90kg loaded
Cartridge: 5.56x45mm
Propulsion: N/A
Speed: N/A
Range: 100m-650m
Launch System: N/A
Price: NSD 950
The PAR-18 was the last conventional weapon to be produced by order of the Prizyetsi military in 1962. In the 50 years of military service, it has become a well respected and loved weapon by the soldiers that have used it, and has been renewed and updated several times since its creation.
The weapon was designed for the national guard as a response to a request for a rugged, dependable, select fire battle rifle to be used in all biomes of Prizyetsa. It was nescesary for the weapon to operate in both hot and sandy conditions, hot and moist conditions and cold and wet conditions. To achieve this, the designers incorperated a closed bolt system, with an multi-setting flap to cover the ejection port. The PAR-18 was originally designed to fire the 7.62×51mm cartridge, however in 1982, it was redesigned to fire the 5.56×45mm round, which became the standard cartridge in use with the Prizyetsi military for logistical reasons.
PAR-18A (Original)
PAR-18S (Standard)
PAR-18S (With buttstock collapsed)
PAR-18C (Compact)
PAR-18C (With butstock collapsed)
Lenght:
PAR-18A 1550mm
PAR-18S 1550mm
PAR-18C 1250mm
Diameter: N/A
Weight: 4.50kg empty, 4.90kg loaded
Cartridge: 5.56x45mm
Propulsion: N/A
Speed: N/A
Range: 100m-650m
Launch System: N/A
Price: NSD 950
The PAR-18 was the last conventional weapon to be produced by order of the Prizyetsi military in 1962. In the 50 years of military service, it has become a well respected and loved weapon by the soldiers that have used it, and has been renewed and updated several times since its creation.
The weapon was designed for the national guard as a response to a request for a rugged, dependable, select fire battle rifle to be used in all biomes of Prizyetsa. It was nescesary for the weapon to operate in both hot and sandy conditions, hot and moist conditions and cold and wet conditions. To achieve this, the designers incorperated a closed bolt system, with an multi-setting flap to cover the ejection port. The PAR-18 was originally designed to fire the 7.62×51mm cartridge, however in 1982, it was redesigned to fire the 5.56×45mm round, which became the standard cartridge in use with the Prizyetsi military for logistical reasons.
Prizyetsi Assault Rifle 19
PAR-19N
PAR-19S
PAR-19C
Lenght:
PAR-19N: 950mm
PAR-19S: 1350mm
PAR-19C: 700mm
Diameter: N/A
Weight: 4.50kg empty, 4.80kg loaded
Cartridge: 5.56x45mm
Propulsion: N/A
Speed: N/A
Range: 100m-650m (PAR-19S: 750m)
Launch System: N/A
Price: NSD 1.250
DESCRIPTION
The PAR-19, or "Parri" as Prizyetsi soldiers refer to it as, is the main assault rifle in the Prizyetsi armed forces. The PAR-19 is of bullpup design, so the magazine is behind the trigger, allowing for better manuevering, less recoil and a more compact rifle. The weapon is chanbered in 5.56x45mm with a selective firing system allowing the shoter to choose between semi-automatic, burst fire and full automatic modes. The PAR-19 comes in three varients, each made for different tasks within the Prizyetsi military.
DESIGN
The PAR-19 uses a bullpup design, on which the CDR is based. Bullpup rifles are configured in a layout in which the bolt carrier group is placed behind the pistol grip; this shortens the overall length but does not sacrifice barrel length. The PAR offers a compact sub machine gun size, while delivering assault rifle muzzel velocity. The bullpup design also aids in urban combat situations, due to it's small size. This makes turning corners safer for soldiers.
The PAR-19 has two ejection ports, one on either side allowing for ambidextrous use. To do so, the shoter must open the top cover and manually shift the fire controll tab. All in all, switching out the ejection direction takes about fifteen seconds.
The PAR-19 was designed by the Prizyetsi Arms Manufacturing Devision to arm soldiers with a rifle which was more lighter, comfortable to usedue to it's advanced ergonomics and more durable than other modern fire arms, for a minimal price.
The PAR accepts many STANAG style magazines, as well as standard Prizyetsi magazines allowing for minimal aditional purchasing costs.
VARIANTS
The PAR-19 comes in three major variants, plus the CDR.
The PAR-19N, or Prizyetsi Assault Rifle 19 Normal, is the standard version issued to most troops.
The PAR-19S, or Sharpshooter, is the standard designated marksman rifle alongside the MR-3.
The PAR-19C, or Carbine is the stabdard issue weapon for the Prizyetsi Special Warfare Division, due to it's compact size.
The PAR-19S-P (Sharpshooter-Paratrooper variant)
PAR-19S-P of the Prizyetsi Ministry of Internal Affairs, 3rd Division, Drugs and Narcotics Unit, Kormosk Oblast Company
PAR-19N
PAR-19S
PAR-19C
Lenght:
PAR-19N: 950mm
PAR-19S: 1350mm
PAR-19C: 700mm
Diameter: N/A
Weight: 4.50kg empty, 4.80kg loaded
Cartridge: 5.56x45mm
Propulsion: N/A
Speed: N/A
Range: 100m-650m (PAR-19S: 750m)
Launch System: N/A
Price: NSD 1.250
DESCRIPTION
The PAR-19, or "Parri" as Prizyetsi soldiers refer to it as, is the main assault rifle in the Prizyetsi armed forces. The PAR-19 is of bullpup design, so the magazine is behind the trigger, allowing for better manuevering, less recoil and a more compact rifle. The weapon is chanbered in 5.56x45mm with a selective firing system allowing the shoter to choose between semi-automatic, burst fire and full automatic modes. The PAR-19 comes in three varients, each made for different tasks within the Prizyetsi military.
DESIGN
The PAR-19 uses a bullpup design, on which the CDR is based. Bullpup rifles are configured in a layout in which the bolt carrier group is placed behind the pistol grip; this shortens the overall length but does not sacrifice barrel length. The PAR offers a compact sub machine gun size, while delivering assault rifle muzzel velocity. The bullpup design also aids in urban combat situations, due to it's small size. This makes turning corners safer for soldiers.
The PAR-19 has two ejection ports, one on either side allowing for ambidextrous use. To do so, the shoter must open the top cover and manually shift the fire controll tab. All in all, switching out the ejection direction takes about fifteen seconds.
The PAR-19 was designed by the Prizyetsi Arms Manufacturing Devision to arm soldiers with a rifle which was more lighter, comfortable to usedue to it's advanced ergonomics and more durable than other modern fire arms, for a minimal price.
The PAR accepts many STANAG style magazines, as well as standard Prizyetsi magazines allowing for minimal aditional purchasing costs.
VARIANTS
The PAR-19 comes in three major variants, plus the CDR.
The PAR-19N, or Prizyetsi Assault Rifle 19 Normal, is the standard version issued to most troops.
The PAR-19S, or Sharpshooter, is the standard designated marksman rifle alongside the MR-3.
The PAR-19C, or Carbine is the stabdard issue weapon for the Prizyetsi Special Warfare Division, due to it's compact size.
The PAR-19S-P (Sharpshooter-Paratrooper variant)
PAR-19S-P of the Prizyetsi Ministry of Internal Affairs, 3rd Division, Drugs and Narcotics Unit, Kormosk Oblast Company
Prizyetsi Assault Rifle 21
PAR-21 showing attachable foregrip.
Lenght: 750mm
Diameter: N/A
Weight: 3.90kg empty, 4.30kg loaded
Cartridge: 6.8mm spc
Propulsion: N/A
Speed: N/A
Range: 300m-450m depending on conditions
Launch System: N/A
Price: NSD 1.250
The PAR-21 is a gas operated, selective fire weapon chambered in 6.8mm SPC and was designed specially to specifications set by Unified Arcadia. With a relativly high rate of fire of 600 rounds per minute when on full auto, the PAR-21 is well suited for both standard infantry as well as support gunner. (With drum magazine.)
The PAR-21's standard magazine is a modified STANAG type, which has been expanded to hold the 6.8mm SPC round. Each magazine holds 30 rounds. The 6.8mm SPC round has a higher stopping power than most assault rifles, and is therefor better suited to deal with body armor as there is a higher chance of penetration.
The range achievable with the PAR-21 is roughly 450m, provided the shooter is a highly trained marksman. The sights available on the weapon are adjustable to optimise accuracy. The sights also happen to be collapsable, in order to fit on various modifications.
The weapon's polymer build makes it extremely lightweight, albeit the fact that it is chambered in a reasonably heavy round. This has many advantages over other modern firearms, as more equipment and ammunition can be carried per soldier.
Finally, the PAR-21's rail system provides the ability to thuroughly custmise the weapon to fit the mission description at hand, and that feature makes this rifle an extremely simple and versatile weapon.
PAR-21 showing attachable foregrip.
Lenght: 750mm
Diameter: N/A
Weight: 3.90kg empty, 4.30kg loaded
Cartridge: 6.8mm spc
Propulsion: N/A
Speed: N/A
Range: 300m-450m depending on conditions
Launch System: N/A
Price: NSD 1.250
The PAR-21 is a gas operated, selective fire weapon chambered in 6.8mm SPC and was designed specially to specifications set by Unified Arcadia. With a relativly high rate of fire of 600 rounds per minute when on full auto, the PAR-21 is well suited for both standard infantry as well as support gunner. (With drum magazine.)
The PAR-21's standard magazine is a modified STANAG type, which has been expanded to hold the 6.8mm SPC round. Each magazine holds 30 rounds. The 6.8mm SPC round has a higher stopping power than most assault rifles, and is therefor better suited to deal with body armor as there is a higher chance of penetration.
The range achievable with the PAR-21 is roughly 450m, provided the shooter is a highly trained marksman. The sights available on the weapon are adjustable to optimise accuracy. The sights also happen to be collapsable, in order to fit on various modifications.
The weapon's polymer build makes it extremely lightweight, albeit the fact that it is chambered in a reasonably heavy round. This has many advantages over other modern firearms, as more equipment and ammunition can be carried per soldier.
Finally, the PAR-21's rail system provides the ability to thuroughly custmise the weapon to fit the mission description at hand, and that feature makes this rifle an extremely simple and versatile weapon.
Civil Defense Rifle Mk. 1
Lenght: 950mm
Diameter: N/A
Weight: 4.50kg empty, 4.80kg loaded
Cartridge: 5.56x45mm
Propulsion: N/A
Speed: N/A
Range: 100m-550m
Launch System: N/A
Price: NSD 850
DESCRIPTION
As the name states, the CDR-1 is a general use weapon for use by the militias of Prizyetsa during times of need. The rifle needed to be rugged and reliable as well as relativly cheap. This proved to be a hard combination to achieve but this weapn is the result of that order. The CDR is issued to all militia and reserves personell in Prizyetsa, and can be isued to anyone that requests one as lng as they have no mental or psychological issues and no criminal record.
The CDR is a defensive rifle, so it is made to fire in "single fire" mode only. The CDR comes with 3 magazines, each holding 15 rounds.
WHY BUY THE CDR-Mk.1?
The CDR is a reliable, rugged weapon. It is easy to operate and also easier to strip and clean. This made the CDR a favorite amongst Prizyetsi civilians and police alike. I highly recomend the Civil Defense Rifle for you!
Lenght: 950mm
Diameter: N/A
Weight: 4.50kg empty, 4.80kg loaded
Cartridge: 5.56x45mm
Propulsion: N/A
Speed: N/A
Range: 100m-550m
Launch System: N/A
Price: NSD 850
DESCRIPTION
As the name states, the CDR-1 is a general use weapon for use by the militias of Prizyetsa during times of need. The rifle needed to be rugged and reliable as well as relativly cheap. This proved to be a hard combination to achieve but this weapn is the result of that order. The CDR is issued to all militia and reserves personell in Prizyetsa, and can be isued to anyone that requests one as lng as they have no mental or psychological issues and no criminal record.
The CDR is a defensive rifle, so it is made to fire in "single fire" mode only. The CDR comes with 3 magazines, each holding 15 rounds.
WHY BUY THE CDR-Mk.1?
The CDR is a reliable, rugged weapon. It is easy to operate and also easier to strip and clean. This made the CDR a favorite amongst Prizyetsi civilians and police alike. I highly recomend the Civil Defense Rifle for you!
Prizyetsi Sub-Machine Gun-20
PSMG-20N (Normal)
PSMG-20S (Suppreced)
PSMG-20SO (Special Operations)
Lenght: 650mm
Diameter: N/A
Weight: 3.90kg empty, 4.30kg loaded
Cartridge: 7.62x25mm
Propulsion: N/A
Speed: N/A
Range: 100m-250m
Launch System: N/A
Price: NSD 750 (or NSD 865 for S variant and SO variant)
DESCRIPTION
The PSMG-20 is the first submachine gun to be produced by the Prizyetsi Arms Manufacturing Division. Although PAMD has had no earlier experience in producing SMG's, extensive resaerch was done into the design and workings of similar weapons.
The PSMG is compact, light-weight sub-machine gun chambered in 7.62x25mm. It is a selective fire weapon that uses a unique gas operating rotating bolt system that allows for a higher rate of fire, while reducing recoil in order to optimise performance.
The PSMG utilizes a polygonal grooved barrel, which stabalizes the bullet in flight. Although traditional rifling would have suffised as well, PAMD chose polygonal rifling in order to make servicing the weapon easier for troops in the field, to provide a more effitient gas seal and to increase muzzel velocity by reducing bullet deformation.
The PSMG uses a helical magazine, which holds 60 bullets. The magazine is inserted behind the pistol grip, allowing for a slightly longer barrel and thus, more acuracy.
The sights on the PSMG are standard small caliber battle sights, or SSCBS for short, and can be adjusted to pinpoint acuracy at any range up to 250m for skilled shooters. In adition, the PSMG-20SO comes with an extra rail segment, on which extra optics can be placed.
The PSGM-20S and PSGM-20SO come with built in sound supressors to optimise stealth.
The PSMG was designed for use in all branches of the military and is used by some police units. It's compact size makes it the perfect weapon for a wide range of users, from special operations groups to tank crews and bodyguards.
PSMG-20N (Normal)
PSMG-20S (Suppreced)
PSMG-20SO (Special Operations)
Lenght: 650mm
Diameter: N/A
Weight: 3.90kg empty, 4.30kg loaded
Cartridge: 7.62x25mm
Propulsion: N/A
Speed: N/A
Range: 100m-250m
Launch System: N/A
Price: NSD 750 (or NSD 865 for S variant and SO variant)
DESCRIPTION
The PSMG-20 is the first submachine gun to be produced by the Prizyetsi Arms Manufacturing Division. Although PAMD has had no earlier experience in producing SMG's, extensive resaerch was done into the design and workings of similar weapons.
The PSMG is compact, light-weight sub-machine gun chambered in 7.62x25mm. It is a selective fire weapon that uses a unique gas operating rotating bolt system that allows for a higher rate of fire, while reducing recoil in order to optimise performance.
The PSMG utilizes a polygonal grooved barrel, which stabalizes the bullet in flight. Although traditional rifling would have suffised as well, PAMD chose polygonal rifling in order to make servicing the weapon easier for troops in the field, to provide a more effitient gas seal and to increase muzzel velocity by reducing bullet deformation.
The PSMG uses a helical magazine, which holds 60 bullets. The magazine is inserted behind the pistol grip, allowing for a slightly longer barrel and thus, more acuracy.
The sights on the PSMG are standard small caliber battle sights, or SSCBS for short, and can be adjusted to pinpoint acuracy at any range up to 250m for skilled shooters. In adition, the PSMG-20SO comes with an extra rail segment, on which extra optics can be placed.
The PSGM-20S and PSGM-20SO come with built in sound supressors to optimise stealth.
The PSMG was designed for use in all branches of the military and is used by some police units. It's compact size makes it the perfect weapon for a wide range of users, from special operations groups to tank crews and bodyguards.
BODY ARMOR
Ingvær Protection System
Class: IV
Weight: 9.5kg
Price: USD 1.800
Standard Print: Optional
The Ingvær Protection System is one of the Prizyetsi military's main body armor system in the standard use bracket. It is a 5 plate system, meaning it uses 5 composite material plates to protect the wearer. Two plates are in the front, one for the stomach and a semi-atached plate to guard the torso, tow plates protecting the sides (one on each side) and one plate protecting the wearer's back. The plates are made of a confedential material, whos name and composition are guarded secrets of the Republic. What is publically know about the system is that each plate is capable of flexing to the wearer's form, and covered in a shock absorbing gel in order to lessen the blow to the wearer. Since the plates are so light, the vest is easy to wear to the soldier and does not add too much weight allowing for extra comfort.
Class: IV
Weight: 9.5kg
Price: USD 1.800
Standard Print: Optional
The Ingvær Protection System is one of the Prizyetsi military's main body armor system in the standard use bracket. It is a 5 plate system, meaning it uses 5 composite material plates to protect the wearer. Two plates are in the front, one for the stomach and a semi-atached plate to guard the torso, tow plates protecting the sides (one on each side) and one plate protecting the wearer's back. The plates are made of a confedential material, whos name and composition are guarded secrets of the Republic. What is publically know about the system is that each plate is capable of flexing to the wearer's form, and covered in a shock absorbing gel in order to lessen the blow to the wearer. Since the plates are so light, the vest is easy to wear to the soldier and does not add too much weight allowing for extra comfort.
MISSILES
Hauka MRASM
DISCRIPTION
The "Hauka" or, "Hawk" is a Medium Range Anti Ship Missile, designed by the Prizyetsi Arms Manufacturing Devision, is capable of reaching targets up to a range of 300km for the Mk. 1 export model and 500km for the Mk. 2 export model.
Loosly based on the BrahMos anti ship missile produced by Russia and India, the Hauka uses a similar two-stage method to deliver it's warhead (or warheads in some cases). After being lanched, the Hauka flies to an altitude of 5000 meters where it uses it's first stage solid fuel rocket-thruster untill it is at an 80 degree angle above its target. At this point, the Hauka engages its second stage ramjet to reach an aproximate speed of mach 3, where it goes into a near verticle plummet onto the target, delivering its warhead. The near verticle plummet is designed to surpass any Close In Weapons Systems that may be in place on board the target.
The Hauka MRASM is 6230mm long by, 700mm wide (without fins). The launcher tube is 7000mm by 800mm, and is designed to be stacked on top of other missile tubes designed by the Prizyetsi Arms Manufacturing Devision.
The standard warhead placed on the export model of the Hauka MRASM is made up of a tungston sabot, backed by 250kg of high explosives. This combination caused the most damage during trials.
The Hauka MRASM platform is designed to sink any vessel from the size of a corvette up to the size of a missile cruiser with a single missile. In order to sink a carrier-sized vessel, it is advisable to use 2-4 Hauka MRASM's.
PRICE
The price per unit of the Hauka Mk. 1 MRASM is NSD 3.8 million (NSD3,800,000)
The price per unit of the Hauka Mk. 2 MRASM is NSD 5.0 million (NSD5,000,000)
DISCRIPTION
The "Hauka" or, "Hawk" is a Medium Range Anti Ship Missile, designed by the Prizyetsi Arms Manufacturing Devision, is capable of reaching targets up to a range of 300km for the Mk. 1 export model and 500km for the Mk. 2 export model.
Loosly based on the BrahMos anti ship missile produced by Russia and India, the Hauka uses a similar two-stage method to deliver it's warhead (or warheads in some cases). After being lanched, the Hauka flies to an altitude of 5000 meters where it uses it's first stage solid fuel rocket-thruster untill it is at an 80 degree angle above its target. At this point, the Hauka engages its second stage ramjet to reach an aproximate speed of mach 3, where it goes into a near verticle plummet onto the target, delivering its warhead. The near verticle plummet is designed to surpass any Close In Weapons Systems that may be in place on board the target.
The Hauka MRASM is 6230mm long by, 700mm wide (without fins). The launcher tube is 7000mm by 800mm, and is designed to be stacked on top of other missile tubes designed by the Prizyetsi Arms Manufacturing Devision.
The standard warhead placed on the export model of the Hauka MRASM is made up of a tungston sabot, backed by 250kg of high explosives. This combination caused the most damage during trials.
The Hauka MRASM platform is designed to sink any vessel from the size of a corvette up to the size of a missile cruiser with a single missile. In order to sink a carrier-sized vessel, it is advisable to use 2-4 Hauka MRASM's.
PRICE
The price per unit of the Hauka Mk. 1 MRASM is NSD 3.8 million (NSD3,800,000)
The price per unit of the Hauka Mk. 2 MRASM is NSD 5.0 million (NSD5,000,000)
"Kotka" CHCM
DISCRIPTION
Length: 3.2m
Diameter: 0.4m
Weight: 830kg
Warhead: 200kg
Operational Range: 750km
Propulsion: Ramjet
Speed: Mach 5
Launch System: Surface, Air, Submarine
Prices:
Kotka-S 5.0 million NSD
Kotka-L.AP 4.5 million NSD
Kotka-L.AV 5.0 million NSD
Kotka-L.EM 12.0 million NSD*
*The Kotka-L.EM can be denied by Prizyetsa for any reason given.
The Kotka is a Compact Hypersonic Cruise Missile designed by the Prizyetsi Arms Manufacturing Division, cabable of hitting targets at a range of 800km. The Kotka travels at an average speed of mach 5.
The Kotka was designed due to a requirement issued by the Prizyetsi Marinii for a compact, hypersonic cruise missile capable of fitting a stand off role in the Northern Sea. The Prizyetsi Arms Manufacturing Division produced a prototype missile capable of reaching 750km at extremely high speeds in order to evade current defense systems in place onboard enemy vessels.
Although the Kotka is extremely fast and manuverable, it's size limited it's warhead capacity a 200kg high explosive load. This load is reletively small compared to other missiles of its class, however it is configured in the same manner as the Hauka MRASM. The main charge is set behind a tungston sabot in order to penetrate any armor that may be present onboard the target.
SEA VARIANT
Again, the delivery system is identicle to the Hauka MRASM. The missile is launched, and it emediatly climbs to an altitude of 5000m above sea level. As the Kotka-S reaches a point above the target vessel, it goes into a controlled dive into the target, where the sabot-explosive combo warhead inflicts the maximum damage to the target.
LAND VARIANT
Like the sea variant, the Kotka-L utilises the same three-stage delivery sequence. Unlike the Kotka-S however, the warhead sellection is a lot more customizable. The warheads available for the Kotka-L are as follows;
Anti Personell(AP)-An air-burst type warhead, packed with shrapnel, designed to explode 50m above the ground.
Efective Radius: 70m
Anti-Vehicle(AV)-An air-burst type warhead which utilises a thermite-like subtance to efectivly "rain fire" onto enemy vehicles. Efective Radius: 50m
Electro-Magnetic(EM)-A small, clean thermo-nuclear device that detinates at 3000m to cause a EMP effect over a small area.
Efective Radius: 10km
DISCRIPTION
Length: 3.2m
Diameter: 0.4m
Weight: 830kg
Warhead: 200kg
Operational Range: 750km
Propulsion: Ramjet
Speed: Mach 5
Launch System: Surface, Air, Submarine
Prices:
Kotka-S 5.0 million NSD
Kotka-L.AP 4.5 million NSD
Kotka-L.AV 5.0 million NSD
Kotka-L.EM 12.0 million NSD*
*The Kotka-L.EM can be denied by Prizyetsa for any reason given.
The Kotka is a Compact Hypersonic Cruise Missile designed by the Prizyetsi Arms Manufacturing Division, cabable of hitting targets at a range of 800km. The Kotka travels at an average speed of mach 5.
The Kotka was designed due to a requirement issued by the Prizyetsi Marinii for a compact, hypersonic cruise missile capable of fitting a stand off role in the Northern Sea. The Prizyetsi Arms Manufacturing Division produced a prototype missile capable of reaching 750km at extremely high speeds in order to evade current defense systems in place onboard enemy vessels.
Although the Kotka is extremely fast and manuverable, it's size limited it's warhead capacity a 200kg high explosive load. This load is reletively small compared to other missiles of its class, however it is configured in the same manner as the Hauka MRASM. The main charge is set behind a tungston sabot in order to penetrate any armor that may be present onboard the target.
SEA VARIANT
Again, the delivery system is identicle to the Hauka MRASM. The missile is launched, and it emediatly climbs to an altitude of 5000m above sea level. As the Kotka-S reaches a point above the target vessel, it goes into a controlled dive into the target, where the sabot-explosive combo warhead inflicts the maximum damage to the target.
LAND VARIANT
Like the sea variant, the Kotka-L utilises the same three-stage delivery sequence. Unlike the Kotka-S however, the warhead sellection is a lot more customizable. The warheads available for the Kotka-L are as follows;
Anti Personell(AP)-An air-burst type warhead, packed with shrapnel, designed to explode 50m above the ground.
Efective Radius: 70m
Anti-Vehicle(AV)-An air-burst type warhead which utilises a thermite-like subtance to efectivly "rain fire" onto enemy vehicles. Efective Radius: 50m
Electro-Magnetic(EM)-A small, clean thermo-nuclear device that detinates at 3000m to cause a EMP effect over a small area.
Efective Radius: 10km
" Vasama" Suface to Air Missile
DISCRIPTION
Lenght: 2300mm
Diameter: 200mm
Weight: 1.200kg
[b]Warhead: 80kg High Explosive-Solid Shrapnel Warhead
Propulsion[/b]: Two stage solid fuel rocket
Speed: 7300km/h
Range: 550km
Launch System: Surface Launcher, Ship
Price:
Mk. 1 NSD 95.000
Mk. 2 NSD 115.000
Mk. 3 NSD 115.000
DISCRIPTION
The Vasama SAM was designed due to the lack of an existing SAM to serve all branches of the Prizyetsi Defense Forces, however the actual request was issued by the Landagårda. The missile that resulted from this request became the Vasama, or Arrow. Since it's inaugeration into the Prizyetsi military, it has ben succesful in all trials, destroying 99.5% of it's targets. The only error during testing was a launching error, where the release bolt on the launcher jammed. The missile functioned correctly, and the engine burned out all of it's fuel untill it burned itself out.
PROPULSION SYSTEM
The Vasame SAM uses a two-stage, solid fuel rocket engine, allowing it to reach speeds of up to 7300km/h. The first stage rocket gets the missile out of it's launching tube and climbs to an altitude of 1000m before activating the second stage rocket, which the missile will use for the rest of it's journey.
WARHEAD
The Vasama's warhead is unlike any other in use with the Prizyetsi Military. The warhead is comprised of 80kg of high explosive material wrapped in a jacket of metal shrapnel. This design was chosen due to the fact that the standard sabot-high exlosive warhead would not work for the AAM role.
GUIDANCE SYSTEM
The Vasama SAM uses a dual guidance system to deliver the warhead to it's target. It uses semi active radar as well as a heat seeker to home in and destroy the target. This makes the missile immune to flair defenses, however is sufficient radar jamming is in place, the missile will have to resort to it's heat sensors.
Mk. 2
The Mk. 2 version includes the ability to be controlled from the ground with the use of a joystick AS WELL AS the above systems. Upon ordering this version, you will be buying the controll system as well.
Mk. 3
The new (as of 25th of March 2011) is equiped with a thermobaric warhead and is set to explode once it nears it's target. (approximatly 25m) The kill-zone for this weapon reaches out to around 60m. This version is designed to destroy aircraft engines as well as large missiles.
DISCRIPTION
Lenght: 2300mm
Diameter: 200mm
Weight: 1.200kg
[b]Warhead: 80kg High Explosive-Solid Shrapnel Warhead
Propulsion[/b]: Two stage solid fuel rocket
Speed: 7300km/h
Range: 550km
Launch System: Surface Launcher, Ship
Price:
Mk. 1 NSD 95.000
Mk. 2 NSD 115.000
Mk. 3 NSD 115.000
DISCRIPTION
The Vasama SAM was designed due to the lack of an existing SAM to serve all branches of the Prizyetsi Defense Forces, however the actual request was issued by the Landagårda. The missile that resulted from this request became the Vasama, or Arrow. Since it's inaugeration into the Prizyetsi military, it has ben succesful in all trials, destroying 99.5% of it's targets. The only error during testing was a launching error, where the release bolt on the launcher jammed. The missile functioned correctly, and the engine burned out all of it's fuel untill it burned itself out.
PROPULSION SYSTEM
The Vasame SAM uses a two-stage, solid fuel rocket engine, allowing it to reach speeds of up to 7300km/h. The first stage rocket gets the missile out of it's launching tube and climbs to an altitude of 1000m before activating the second stage rocket, which the missile will use for the rest of it's journey.
WARHEAD
The Vasama's warhead is unlike any other in use with the Prizyetsi Military. The warhead is comprised of 80kg of high explosive material wrapped in a jacket of metal shrapnel. This design was chosen due to the fact that the standard sabot-high exlosive warhead would not work for the AAM role.
GUIDANCE SYSTEM
The Vasama SAM uses a dual guidance system to deliver the warhead to it's target. It uses semi active radar as well as a heat seeker to home in and destroy the target. This makes the missile immune to flair defenses, however is sufficient radar jamming is in place, the missile will have to resort to it's heat sensors.
Mk. 2
The Mk. 2 version includes the ability to be controlled from the ground with the use of a joystick AS WELL AS the above systems. Upon ordering this version, you will be buying the controll system as well.
Mk. 3
The new (as of 25th of March 2011) is equiped with a thermobaric warhead and is set to explode once it nears it's target. (approximatly 25m) The kill-zone for this weapon reaches out to around 60m. This version is designed to destroy aircraft engines as well as large missiles.
SS-ASM-01 "Injä"
Length: 4.1m
Diameter: 0.4m
Weight: 630kg
Warhead: 250kg HE
Operational Range: 450km
Propulsion: Ramjet
Speed: Mach 4.2
Guidance System: IR, Home on Jam, Home on Radar, Lazer Guiding Device
Launch System: Surface, Air, Submarine
Prices:
Standard NSD 2.500.000
VLS Capable NSD 2.980.000
Due to the high price of the Hauka and Kotka missile systems, the Prizyetsi government issued a request for a supersonic/hypesonic missile with a primary anti ship role, which could pack the same warhead as the earlier missiles, but for half the price. Although this was a very ambitious project, the Prizyetsi Arms Manufacturing Division, together with the Vosonje Heavy Industries plants worked on the project, and came up with a design which, to their amazment, outperformed the earlier systems for half the price. The result was a longer missile, with a heavier lead due to it's upgraded, more economical and easier to produce ramjet propulsion system, which allowed the SS-ASM-01 to retain it's supersonic/hypersonic peformance.
While the requirments were met, the PAMD and VHI wanted to outperform themselves, and add a few features of their own, the most important being an end-stage evasion system. The end-stage evasion system used technology seen in other missile systems, to make random evasive manuevres once near the target, which lowered the chance of being destroyed by CIWS onboard the target. Another new feature was the way it traveled to its target. While earlier missile systems came in from a high angle, which made them easy to spot, but hard to destroy, the SS-ASM-01 comes in at a low level, only 2m above the sea level, and relies on it's speed and agility to remain intact.
Another addition to the required specs were the guidance system. While the requirement only asked for the same system used in the earlier missile systems, the SS-ASM-01 uses a variety of guidance systems, making it a very flexible missile platform. Unlike the Hauka and Kotka, the SS-ASM-01 is able to lock on to almost any target by itself, or be directed by a Battle Space Electronic Warfare Systems aircraft, as was done in the Aldard Humanitarian conflict.
Imediatly after the release of the SS-ASM-01, the request of a VLS capable version of the missile came out. Almost imediatly, a booster was created which launches the missile out of it's verticle launchtube, and releases at 2m above sea level, which activates the main ramjet propulsion system.
The SS-ASM-01 is a well rounded system, capable of hitting any target out there, and is currently fasing out the Hauka missile, and in some cases, replacing the Prizyetsi navy's Kotka system.
Length: 4.1m
Diameter: 0.4m
Weight: 630kg
Warhead: 250kg HE
Operational Range: 450km
Propulsion: Ramjet
Speed: Mach 4.2
Guidance System: IR, Home on Jam, Home on Radar, Lazer Guiding Device
Launch System: Surface, Air, Submarine
Prices:
Standard NSD 2.500.000
VLS Capable NSD 2.980.000
Due to the high price of the Hauka and Kotka missile systems, the Prizyetsi government issued a request for a supersonic/hypesonic missile with a primary anti ship role, which could pack the same warhead as the earlier missiles, but for half the price. Although this was a very ambitious project, the Prizyetsi Arms Manufacturing Division, together with the Vosonje Heavy Industries plants worked on the project, and came up with a design which, to their amazment, outperformed the earlier systems for half the price. The result was a longer missile, with a heavier lead due to it's upgraded, more economical and easier to produce ramjet propulsion system, which allowed the SS-ASM-01 to retain it's supersonic/hypersonic peformance.
While the requirments were met, the PAMD and VHI wanted to outperform themselves, and add a few features of their own, the most important being an end-stage evasion system. The end-stage evasion system used technology seen in other missile systems, to make random evasive manuevres once near the target, which lowered the chance of being destroyed by CIWS onboard the target. Another new feature was the way it traveled to its target. While earlier missile systems came in from a high angle, which made them easy to spot, but hard to destroy, the SS-ASM-01 comes in at a low level, only 2m above the sea level, and relies on it's speed and agility to remain intact.
Another addition to the required specs were the guidance system. While the requirement only asked for the same system used in the earlier missile systems, the SS-ASM-01 uses a variety of guidance systems, making it a very flexible missile platform. Unlike the Hauka and Kotka, the SS-ASM-01 is able to lock on to almost any target by itself, or be directed by a Battle Space Electronic Warfare Systems aircraft, as was done in the Aldard Humanitarian conflict.
Imediatly after the release of the SS-ASM-01, the request of a VLS capable version of the missile came out. Almost imediatly, a booster was created which launches the missile out of it's verticle launchtube, and releases at 2m above sea level, which activates the main ramjet propulsion system.
The SS-ASM-01 is a well rounded system, capable of hitting any target out there, and is currently fasing out the Hauka missile, and in some cases, replacing the Prizyetsi navy's Kotka system.
TORPEDOES
Type 98-L Torpedo http://forum.nationstates.net/posting.php?mode=post&f=6
LAND BASED EXPLOSIVES
LUOMI AT MINE
Length: N/A
Diameter: 200mm
Weight: 15kg
Warhead: 13kg High Explosive
Operational Range: 50m Kill Radius
Propulsion: N/A
Speed: N/A
Launch System: N/A
Price: NSD 3.500
DESCRIPTION
The "Luomi", or "Mole", was designed to fit the Prizyetsi militaries need for an anti-tank weapon capable of both being layed down in ambush, and being detonated by a remote controll. The developement of this weapon was highly contraversial due to the Prizyetsi government's anti-mine policies, however it was deemed apropriate as there would be no need to a Prizyetsi soldier to be within direct line of sight as is the case with AT launchers.
DIRECTIONS
To arm the Luomi, flip it over and open the control panel. Select the mode you wish to use it in and the trigger weight. Retreave the remote controll. Close the pannel and place mine in the intended area. Bury and/or camuflauge as needed. Arm the mine with the remote controll AFTER CLEARING THE AREA. (min. 25m) The mine will go off when either the trigger weight is applied or it is remotly detonated.
Length: N/A
Diameter: 200mm
Weight: 15kg
Warhead: 13kg High Explosive
Operational Range: 50m Kill Radius
Propulsion: N/A
Speed: N/A
Launch System: N/A
Price: NSD 3.500
DESCRIPTION
The "Luomi", or "Mole", was designed to fit the Prizyetsi militaries need for an anti-tank weapon capable of both being layed down in ambush, and being detonated by a remote controll. The developement of this weapon was highly contraversial due to the Prizyetsi government's anti-mine policies, however it was deemed apropriate as there would be no need to a Prizyetsi soldier to be within direct line of sight as is the case with AT launchers.
DIRECTIONS
To arm the Luomi, flip it over and open the control panel. Select the mode you wish to use it in and the trigger weight. Retreave the remote controll. Close the pannel and place mine in the intended area. Bury and/or camuflauge as needed. Arm the mine with the remote controll AFTER CLEARING THE AREA. (min. 25m) The mine will go off when either the trigger weight is applied or it is remotly detonated.
Mk. 43 RPG
Mk. 43 Rocket Propelled Grenade
Length: 700mm
Diameter: 150mm
Weight: 8.5kg
Warhead: 3.5kg
Operational Range: 950m
Propulsion: Solid fuel rocket
Speed: 150m/s
Launch System: Disposable Shoulder Fired Launcher
Price:
V.1 NSD 3.900
V.2 NSD 4.200
DESCRIPTION
The Mk. 43 RPG is a fire and forget weapon which fills the Prizyetsi militery's anti material rocket launcher role. Designed with modern tanks in mind, the launcher had a few major goals which had to met during it's developement stage.
The anti tank version (V.1) of the rocket launcher had to be able to pierce through the battle plating of a tank or AFV. To achieve this, the V.1 was fitted with an explosively formed penetrator, or EFP for short, which uses a 5mm thick sheet of copper, which warps into a bullet shaped armor penetrator. This strikes through the armor, at which point the explosives detonate and destroy the target and kill the crew.
The anti personell version (V.2) uses a thermobaric charge which detonates above the target and explodes in two stages. The first stage spreads a thin but highly explosive aerosol above the target, while the second stage ignites this. The efect is an extreme change in pressure, effectivly crushing the enemy and causing irreversible damage to the internal organs.
Mk. 43 Rocket Propelled Grenade
Length: 700mm
Diameter: 150mm
Weight: 8.5kg
Warhead: 3.5kg
Operational Range: 950m
Propulsion: Solid fuel rocket
Speed: 150m/s
Launch System: Disposable Shoulder Fired Launcher
Price:
V.1 NSD 3.900
V.2 NSD 4.200
DESCRIPTION
The Mk. 43 RPG is a fire and forget weapon which fills the Prizyetsi militery's anti material rocket launcher role. Designed with modern tanks in mind, the launcher had a few major goals which had to met during it's developement stage.
The anti tank version (V.1) of the rocket launcher had to be able to pierce through the battle plating of a tank or AFV. To achieve this, the V.1 was fitted with an explosively formed penetrator, or EFP for short, which uses a 5mm thick sheet of copper, which warps into a bullet shaped armor penetrator. This strikes through the armor, at which point the explosives detonate and destroy the target and kill the crew.
The anti personell version (V.2) uses a thermobaric charge which detonates above the target and explodes in two stages. The first stage spreads a thin but highly explosive aerosol above the target, while the second stage ignites this. The efect is an extreme change in pressure, effectivly crushing the enemy and causing irreversible damage to the internal organs.
