Equipment Of RB (lineart requests/showroom)

[Risen Britannia]

Not all my guns but a selection of my preferred ones. Some images have been scaled to fit

(i dont do write ups, and i only do stat blocks very occasionally)
(in very rough order of "date drawn")

[Risen Britannia]

Guns continued





i also do requests for vehicles

[Risen Britannia]

[Nirvash Type TheEND]

I have a few requests.


XM8 with Iron sights and Aimpoint LPI
FN Five-seveN
M25 rifle with Burris EuroDiamond 1.5-6x40
M240G with 4x32 Trijion ACOG

More to come. I also have a ton of vehicle requests, if you're interested.

[Coltarin]

I want 2-4 of these:

on this:

with a turret

[Bajireyn]

-snip-

[Coltarin]

I want 2-4 of these:
(Image)
on this:
(Image)
with a turret

What would you use such a vehicle for?

Anyways RB,could you lineart a FT MBT for me,should have :

- a 90mm railgun
- a 35mm coax autocannon
- a .50 cal MG in an RWS mount with smoke launchers
- additional launchers on the turret
- a Metalstorm CWIS mount on top the turret
- an active protection system
- a front mounted engine
- an additional exit in the back
- side mounted missile launchers (5 cell)
- a radio antenna
- downward facing exaust ports
- a mount for a plow on the front (for anti mine purposes)
- a shit load of sensors on the top
- a UAV launcher if possible
- tracks
- some sort of FT suspention system
-

Anti helicopter/anti personnel

[Hippostania]

I'd appreciate if you could turn these emblems and flags into lineart: 1, 2, 3, 4 and 5 so I could put them in my army vehicle chart

[South Estovakia]

I would appreciate o\if you could turn all of the PMG guns I have made for Estovakian National Armaments (link in my sig) into lineart. Don't worry, I have only made 3 so far.

[Kouralia]

Could you please create both an AAV7 Amphibious Assault Vehicle and an Ocelot with the 'weapons configuration' pattern pod?

[Noders]

Hey I wish I would have saw this sooner Can I ask for you to make a actual line art guns from the below pic and do you do any ww1or ww2 era stuff?

[Costa Fiero]

Could you modify this with a different turret which looks more modern?

[The UEG-Space Command]

Can you make me a Tank, the Tarantula, bas eit off the scorpian but have it be more stockier so it may have speed and all that if you could, if you need anything else just ask.

Also can you make me a sniper rifle? if so that will be requested if you decide to make the tank, that is if you can, you may take all the time you need.

[New-Elmshorn]

Dear sir or madam,

as the president,defend minister of New-Elmshorn and division general of the 1th special forces squadron, i have a reallive question: With programm do you use for the design of the tanks?(How did you made this?)

Sincerly,
Tom Rathlau

[Risen Britannia]

Dear sir or madam,

as the president,defend minister of New-Elmshorn and division general of the 1th special forces squadron, i have a reallive question: With programm do you use for the design of the tanks?(How did you made this?)

Sincerly,
Tom Rathlau

normally MS Paint

(PS sorry to everyone for being a bit slow, but 1- its christmas, 2- i'm having some RL issues atm)

[Red Sector X]

Merry Christmas!
I'd like to place a request (whenever you get the time, it's no rush) of a BTR-50 with a Scorpion tank turret on it. It's for my storefront. Many thanks!

[Leos]

DELETED

[Novraslavia]

Can you design me a locked breach, semi-automatic pistol to replace the CZ 82 the People's Armed Forces of Novraslavia currently uses? I need the weapon to be 190 milometers (7.5 inches) long with a 102 millimeter (4 inch) long barrel. It has to fire the Soviet 9x18mm Makarov round with sights fixed for 50 meters with a 156 millimeter (6.1 inch) sight radius. If you need to know for the grip design, the preferred magazine size would be 15 rounds.

Something like the MP-443 Grach, Makarov PMM, or Grandpower K100 is fine (if you need to look for style inspiration).

As for the lineart style, a simple white, transparent, or pale-gray flat texture is fine. No need for any special effects or anything. Like this.

Thank you in advance!

[Post War America]

Could you do some Linearts for me as you are good at Lineart and my fail at it is so massive Godzilla facepalms me...

I have PMGs and a statblock, stuff I fail less at.

M3 Rifle Mod, Infantry Config


M3 Rifle Mod, Grenadier Config


M3 Rifle Mod, SOPMOD Config


M3 Assault Carbine Mod, Standard Config


M3 LMG Mod, Standard Config


M3 DMR Mod, Standard Config

Weight: 3.3-4kg (Depending on current config) (With a full clip)
Length: 450-700mm (Depending on Current config)
Barrel Length: 407mm, 508mm, or 627mm (Carbine, Standard, and Long)
Caliber: 5.7x32mm gyrojet
Penetration: STANAG Level II with standard ammunition (A very well placed shot may be able to penetrate STANAG III)
Cyclic ROF: 670 RPM
Fire Type: Semiautomatic (All), 3 Round Burst (All except DMR Mod), Automatic (LMG only)
Ammunition Feed: 20, 30, or 45 round box
Maximum Velocity: 1,300 FPS (at 10m)
Recommended Range: 425m (500m DMR Mod)
Effective Range: 2,000m
Maximum Range: 2,400m
Attachments: M1A4 Grenade Launcher, M2A1 Scope, M1A3 Nightscope, M3 Compatible Red Dot System, M3 Compatible Bipod, M3 Compatible Silencer, M3 Compatible Hand Grip
Deployment Level: Standard Issue in all combat ready squads, 1 Grenadier Kit, 1 DMR Kit, 1 LMG Kit per squad, Sergeant carries SOPMOD, Assault Carbine issued as situation requires.
Price: $3,000 NSD (Full Kit without Scope, Nightscope, or Grenade Launcher), $1,750 (Basic Kit)

[Leos]

Could you design me a light tank from ww2 that is 4.5 meters long 2.5 meters tall 2 meters wide
it would have this turret

on this chassis

and a 50mm L50 gun and a coaxial 8mm machine gun
thank you so so so much in advance your awesome RB

[Grand Britannia]

I was hoping I'd find a thread like this!

Could you do lineart of this tank, but with threads and a sleeker cannon? Just to clarify. I mean a turret that can be used to fire missiles with.

And maybe the same with this APC, with a variant using an IFV turret like the Bradley. If you can.

Hope it's not too much

[The Republic of Lanos]

Wow...isn't the second vehicle pic that of a C1A5 Archon from Endwar?

[Risen Britannia]

Wow...isn't the second vehicle pic that of a C1A5 Archon from Endwar?

Yes, it was one of the first (if not the first) requests I did for someone.

[San-Silvacian]

Could you possibly make an F-16C with a few changed up tail markings?

http://www.af.mil/shared/media/photodb/photos/010205-F-1631A-001.jpg

Not that big, I wouldn't wish it on the best of LineArters. Its just the best reference image I could find of the top half.