If you want a seal or logo

[Almonaster Nuevo]

Any chance anyone is working on my request? I realize I made several requests in one post but in each request, all I was asking for is the some curved text to be applied to a design I've already created. At maximum I can't imagine all of my request taking more than 30 minutes to an hour but yet it seems my request has gone ignored and I've been skipped over for other requests. I'd do it myself but I'm a bit of a protectionists and ever attempt at curving the text on my own just doesn't end the way I want it to.

I don't wish to complain but it seems as if the tradition with these threads are that posted requests will be done in the order they are received however, it seems this is not the case. If no one is willing to do my request then fine, I just wish someone who say so instead of having me just infer this due to the lack of attention my request is receiving.

As far as I knew you had been served a while back. Please re-post details of anything which is outstanding.

[Legatia]

Hello! I have a request for a modification (more of a re-do) of my old coat of arms. I've overhauled my nation's canon, so it's now obsolete (mainly due to the logo), so I need a new one.

For the border, I would like it to retain a gold color, but I would like to change it from the current rope design on the interior to a staggered, wreath-like design vaguely similar to this, but they must stay within the circle or circular form, and have no space in between the independent leaves, separated by a border. The leaves should originate at a rectangular form at the bottom (which is the "SPQR" symbol that can be taken directly from my current CoA). The SPQR upon it should be removed. Where the leaves meet at top, a single leaf should extend from the junction of the staggered leaves and a slight gap should be left.

The eagle must remain gold and have a similar appearance, but the application of the old emblem's gradient is at the designer's discretion. It should still be facing to the left, with wings outstretched, but I would like it to (in the fashion of the Great Seal of the United States) be clutching in the left talon a bundle of three scrolls, hopefully not uniform in manner (sort of overlapping, akin to the arrows in the Great Seal of the US), though I would like the handles at the end to be stubbier; the parchment should be white or some sort of off-white, the wooden handles and caps a medium, non-rich non-deep brown. In the right talon, I would like it to hold a bundle of arrows akin again to the Great Seal, however I would like the arrowheads to be a light grey, the shaft to be brown in the same color as the wooden part, and the arrow fletching to be white (but darkened as to not to vividly contrast with the red on which it will likely be on top of.) Within the circle, the color scheme of my flag (gold and red) should follow.

Underneath the eagle's talons and the things it is holding, in a traditional scroll (similar again to my current CoA) with pointed ends and a waving manner that is the same white/off-white of the scrolls of the eagle, I would like in full black and bold lettering my motto, "FORTITUDINEM PER CONCORDIA".

Thank you in advance.

[Yasli]

Could Someone take this and replace the Turkish Flag with my flag (high res). Also, make the worker have a white uniform, and remove the watermark.

Thanks!

[The Batavia]

Note to self: If you ask for an logo or seal here, there is 99% chance you'll be ingnored.

[Great Humania]

Note to self: If you ask for an logo or seal here, there is 99% chance you'll be ingnored.

true true

[Legatia]

Note to self: If you ask for an logo or seal here, there is 99% chance you'll be ingnored.

The people who do these do them out of their free time, it isn't their job to serve you. Be patient, there are people likely who have been waiting for longer.

[Biancavilla]

The people who do these do them out of their free time, it isn't their job to serve you. Be patient, there are people likely who have been waiting for longer.

Agree.

[Paquador]

The flag request topic is at viewtopic.php?f=12&t=238034

(Image)

(Image)

Literally didn't realise that, thank you though, you're a star

[Reikin]

Is there any way you could design a logo for my firearms forum, RCC Armaments? Thanks, Reikin. (viewtopic.php?f=6&t=402802)

[Chinevion]

Is there any way you could design a logo for my firearms forum, RCC Armaments? Thanks, Reikin. (viewtopic.php?f=6&t=402802)

Reikin, i would recommend including some designs to be used, they dont know what you want, you do.

[Reikin]

Is there any way you could design a logo for my firearms forum, RCC Armaments? Thanks, Reikin. (viewtopic.php?f=6&t=402802)

Reikin, i would recommend including some designs to be used, they dont know what you want, you do.

Got it

[Reikin]

Is there any way you could design a logo for my firearms forum, RCC Armaments? Thanks, Reikin. (viewtopic.php?f=6&t=402802)

[Reikin]

Is there any way you could design a logo for my firearms forum, RCC Armaments? Thanks, Reikin. (viewtopic.php?f=6&t=402802)

Better one http://imgur.com/a/XeRTg

[Soreka]

I would like to make a request on making an emblem/seal

Actually I already made the work and scan it, but can someone color it to make it look like a Kriegsmarine emblem?

[Corindia]

Better one http://imgur.com/a/XeRTg

[Corindia]

Can I get a seal for the Prime Minister of Manchulina?

It should feature the symbol in the center of my flag and feature the words Prime Minister of Manchulina.

[Yasli]

Could Someone take this and replace the Turkish Flag with my flag (high res). Also, make the worker have a white uniform, and remove the watermark.

Thanks!

bump

[Mabuhay Land]

Hello! I want a logo for a police agency.

First of all, the base must be based on the link below. Then divide into four parts.
(https://s-media-cache-ak0.pinimg.com/or ... b678c5.jpg)

After that, color the two left pieces blue and two left pieces red.
As in these codes: #0038A8 (blue), #CE1126 (red)

When you're done, off we go with the design.

Put the picture in the link below the base shape and change its color into green.
(http://2.bp.blogspot.com/-yPKb2HcQ5OI/U ... ls_Free+(7).png)

Next up, the centerpiece.

So put this in the picture in the link in the center:
(https://upload.wikimedia.org/wikipedia/ ... es.svg.png)

And put this one on the center of the sun:
(https://s-media-cache-ak0.pinimg.com/or ... 84391e.jpg)

Put the picture in the link below the laurel.
(http://weclipart.com/gimg/B89A8E9CFCC93547/13007.jpg)

And put the words on the picture in the link Mabuhay Landian National Police
And put above the base shape these words: Our service to serve, protect, secure and help.

Thanks in advance.

Like this?

Could you please enlarge the base horizontally. And the ribbon is too short.
This is the inspiration of the logo I request:

[Uttland]

Hey, need another logo in addition to the one I requested. This one isn't needed as of the moment, so there is no rush to do this one.

So, I need a red square outline, as in no center. Make the red kinda dark, and perhaps make it a little shiny. The slightest glare in one of the top corners.

After this, in the bottom right hand corner, white out the entire area. Here is where the text goes. I need the text be thick yet tall. Whatever font, as long it's formal, is good. In a dark grey, write "UICE".

Then under the red square, aligned with it, write "UDASSAS INTERNATIONAL COMMODITY EXCHANGE".

That's it for this one. Thanks in advance

[Almonaster Nuevo]

I would like to make a request on making an emblem/seal

Actually I already made the work and scan it, but can someone color it to make it look like a Kriegsmarine emblem?
(Image)

That's a pretty poor scan. This is about all I can do with that.

[Reikin]

Better one http://imgur.com/a/XeRTg

?

I think you attached the wrong thing

[Soreka]

I would like to make a request on making an emblem/seal

Actually I already made the work and scan it, but can someone color it to make it look like a Kriegsmarine emblem?
(Image)

That's a pretty poor scan. This is about all I can do with that.

Thank you sir, my scanner wasn't really good and I tried fixing it to make it look ok.

Um another request. If you like to color this something like the USN colors.

[Eastern Franks]

Make a seal for me, It should be like the Grand Royal Coat of Arms of France

https://www.google.com/url?sa=i&rct=j&q=&esrc=s&source=images&cd=&cad=rja&uact=8&ved=0ahUKEwie0ebdg8TUAhWDvRQKHQjXCF0QjhwIBQ&url=https%3A%2F%2Fwww.pinterest.com%2Fpin%2F382946774539500430%2F&psig=AFQjCNG7gQ-UHxRXH2Dj0GkPf3m-38gsEQ&ust=1497759670041119

It should have the Iron Cross on the bottom as our involvement in WW1. Read my Factbook for more details.

[Almonaster Nuevo]

That's a pretty poor scan. This is about all I can do with that.

Thank you sir, my scanner wasn't really good and I tried fixing it to make it look ok.

Um another request. If you like to color this something like the USN colors.

USN??

[Yasli]

Could I get this logo, but replace the orange with the yellow I have on my flag. Replace the Sputnik with 'DOSYA'

Thanks!