If you want a seal or logo

[Imagey Nation]

Postby Senera » Sat Aug 23, 2014
Hello Imagey Nation
I have a request.
Could you make an coat of arms/seal with inspiration from the Fleur-de-ils and/or the French national emblem?
Everything pure golden colored with one resembeling Fleur-de-ils and maple leaves/laurel wreath surrounding it.
http://en.wikipedia.org/wiki/Laurel_wre ... rn_rem.jpg
http://en.wikipedia.org/wiki/Fleur-de-l ... de_lys_(or).svg
http://en.wikipedia.org/wiki/French_coa ... A7aise.svg
senera__272207.jpg
“Unon bonum”
national animal is the Eagle

Thank you.

[Imagey Nation]

Postby Miensk » Thu Aug 28, 2014
If it's possible I have an another request:
Red shield with white frame and inside that one or three yellow wheat stems.
miensk__687764.jpg
“Jedni narod, jedni Bog!”

Thank you.

[Imagey Nation]

Postby The Hels syndicate » Thu Aug 28, 2014
I would like a large blu old fashioned bell. And in a circle have it say bluebell port
the_hels_syndicate__254625.png

Thank you.

[Imagey Nation]

Postby Pino Grand Fenwick » Mon Sep 01, 2014
I want a seal with our flag and name on it
pino_grand_fenwick__304728.jpg
“Veritas Et Fortitudo”
national animal is the Phoenix

Postby Pino Grand Fenwick » Wed Sep 03, 2014
Imagey if you can I would like a seal with my flag, country name and Motto on it (the motto is: Veritas Et Fortitudo)

Thank you.

[Imagey Nation]

Postby Republic of Vietnam » Wed Sep 10, 2014
Can you take out the star in the logo and put the Anchor and the lotus in it's place? Also, turn the red section into a blue color like the flag.
150px-Vietnam_Naval_Academy_logo.png
Flag_of_South_Vietnam_Navy.png
Thank you!
republic_of_vietnam__811244.png

Thank you.

[Imagey Nation]

Postby Gigaverse » Sun Sep 21, 2014
<=(Took me a while to ask again, but...
Here's the shape as I envisioned.
15107617709_68ddeb7517_b.jpg)
Also, I need a new symbol. I request that it is a cross, not dissimilar from the Christian cross, but with silver sword-like arrows that have gold covering them on the outside. (Preferably, I need the vertical piece to be an Excalibur-like blade.) When everything's done, have the skull here placed on the intersection of the arrows.
Yd1qB.jpg
Once again, thank you for your diligent work, Imagey.

Postby Gigaverse » Sun Oct 12, 2014
Imagey Nation wrote:
...
Gigaverse cross symbol.png
Thank you.
Could you remove the headphones from the skull, enlarge it a bit and make it so the ultimate result is something similar to this? Thank you!
15328230677_64c9694a77_b.jpg

Thank you.

[Imagey Nation]

Postby Legatia » Wed Oct 01, 2014
I'd like to request another seal.
I need a rather tall escutcheon, i.e. the shield typically found on coats of arms, with a dark navy blue color, the shield bordered by a golden color. I need a white silhouette of this rocket centered on it,
EMJ2tiL.jpg
and a scroll on the top that says "Legatian Spatiae Administrationem". On the bottom, it should also have a scroll that says "Quae fit per astra, et ultra".
Thank you.

Thank you.

[Imagey Nation]

Postby Serrian » Sat Oct 04, 2014
Hello, time for a flag request.
Could you please make a flag with a background as similar as possible to the blue pn my current flag. Please place a large white circle in the middle and surround it with eight smaller circles, with laurels underneath the large circle. Also, please surround the circles with a larger, white-edged circle.
Thanks!
serrian__583701.jpg

Thank you.

[The Kingdom of Glitter]

Request for a National Seal:

Something similar to the Roundel of Luxembourg, but instead of the Flag of Luxembourg this flag with a unicorn similar to this one on top of it in grey.

Let me know if there are any problems with the request I can try and correct them !

I would like to rescind my request for this seal, and instead request a Coat of Arms.

This might be a tad complicated, I'm not sure how well it will work. But if I could get a coat of arms based upon the Coat of Arms of Scotland with the following changes:
1. The two flags are both changed to this flag or if that is not possible are just removed.
2. The Lion Rampant is replaced with a pink shield with a unicorn such as this one on top of it.
3. The In Defens is changed to Sparkle Sparkle or just removed.

If the above is not possible, please let me know and I will try and come up with an easier request, as I know this one is a little challenging.

[Imagey Nation]

Hello, Imagey. Imagey, all I need done is the following text to be somehow wrapped and put on the banners of the seal below: "Cоціалізм держави, соціалізм для держави"

(Image)

Thank you.

Hello, Imagey. I actually, after about a week, added the words onto the coat of arms:

However, If you see neccesary and if you wish, you can fix up the words on there, in case they need to be space and lined right according to the banner they are on. If you do do this, thank you.

EDIT: [i]Nevermind, Imagey. To advance the roleplay this seal plays in, You do not need to fix the seal at all. It shall do good. Thank you.

Thank you for notice.

[Republic of Vietnam]

Postby Republic of Vietnam » Wed Sep 10, 2014
Can you take out the star in the logo and put the Anchor and the lotus in it's place? Also, turn the red section into a blue color like the flag.
150px-Vietnam_Naval_Academy_logo.png
Flag_of_South_Vietnam_Navy.png
Thank you!
republic_of_vietnam__811244.png

Thank you.

Thanks Imagey!

[United Socialist Republic of Restonia]

Hello Imagey Nation! First let me compliment you on the fantastic work you do here. Amazing stuff!

Second, if you ever need any help, I too can do basic flags and such. I did do my own national flag for an example. I also did create the below seal, but only by coloring in the globe and adding the imagery that I wanted, as well as adding the water, mountains, and text. The rest was already in the image I used as my base. (see working image at end of post)

Really what I would like done with this is just some tweaks. If you would like me to post each minor variation that I would like, in a separate post, I will do that, just please let me know.

Id like to have a few very slightly different versions of this, my national seal. If possible both in vector / png (clear background) and jpg. If you can't do that I do understand. Firstly, if you could get rid of the different color square around the center logo of the hammer, sickle, & cog and make it the same red as the rest that would be awesome. If you would like to clean up the bottom where the mountains, water are, that is great, as well as the "Sic Semper Tyrannis" may need to be cleaned up a bit, if you see fit. If you feel you can get the U.S. R. R to fit better, then by all means please do.

As for the variants, Id like one with just the change above. The next couple involve changing the ribbon to the colors of my national flag. If you need me to upload a blank one for you I will. It has a slightly fatter red center stripe, with smaller blue and yellow areas. Id like one like that with the ribbon left blank.

Next, is text on that ribbon contoured to make it look like it is on the ribbon, in a font similar to what I used (or anything that looks to be the best fit) in the same color yellow / gold as the current text. The text should read as follows starting with the top left ribbon: (top left) UNITED, (top right ribbon) SOCIALIST, (middle left ribbon) REPUBLIC, (middle right ribbon) of RESTONIA. If the word of needs capitalised or needs to be placed over with republic, that is fine. I trust your judgement. Perhaps do one where only the top two ribbons on each side are the colors of my national flag as well, and leaving the the bottom two, and center ribbon as solid red.

I was going to see if you could use my national flag as the background of the main center circle, but I feel that may not work due to the yellow on yellow. Perhaps also just do one where the start at the top are the colors of my national flag (horizontally).

I think that is it for now. Thank you so much for all of your great and hard work! It is much appreciated.

[Republic Of Yilen]

I was wondering if you could make a double headed eagle holding a sword and shield and under it have Vallerii written.

[Lisbane]

My request is cancelled, sorry for any inconvenience.

[Imagey Nation]

My request is cancelled, sorry for any inconvenience.

Thank you for notice.

[Imagey Nation]

Postby New Roma Republic » Thu Oct 09, 2014
Can you create my nation a Coat of Arms? If you can, please include:
gZbRkTP.png
Also, please include my flag and a space type theme in it. If you need anymore ideas, you could look through my factbook.
Last edited by New Roma Republic on Thu Oct 09, 2014, edited 2 times in total.
new_roma_republic__61307.jpg

]
Thank you.

[Imagey Nation]

Postby Irav » Thu Oct 09, 2014
Could I please get a logo for on my flag?
Preferably with this picture, with the outer ring being made a bit bigger with 8 silver stars on it
Water_Tribe_emblem.png
This will resemble the Iravian navy, and the eight wars that were fought and formed to nation to what it is today.
Thanks in advance
irav__168020.png

Logo

Flag

Thank you.

[Imagey Nation]

Postby Divergia » Sat Oct 11, 2014
1. This Bolshevik Dalek flag but centered properly and could you give it some "polish"/make it less fuzzy at higher resolutions such as this
24W3kdE.png

Thank you.

[Imagey Nation]

Postby Divergia » Sun Oct 12, 2014
2.
nB3D9uy.jpg
Symbol in top-left corner should be replaced with: http://i779.photobucket.com/albums/yy79 ... a072f5.png
Divergia Zombie seal.svg Were it reads Elder Party, it Should read: Convergea, all other symbols on the seal should be removed. Also please make it a png. Thank you Imagey[/nation]

Thank you.

[Imagey Nation]

Postby Remaining Crusaders » Sun Oct 12, 2014
Hi.I'd like to have a logo like this the one the Socialist Republic of Romania had.
http://en.wikipedia.org/wiki/Socialist_ ... (1965-1989).svg
But instead of ''Republica'' and ''Socialista'' it should be ''Unoina'' and ''Democratica'' and instead of Romania,please put ''Cruciatia''
Thanks in advance!
remaining_crusaders__979747.jpg

Thank you.

[Imagey Nation]

Postby Divergia » Mon Oct 13, 2014
3.flag redesign for Necropolis: Make it bigger, besides that do with it what you think will make it look better
tiJqycD.png

Thank you.

[Organized States]

Postby Organized States » Wed Jun 25, 2014
Could you design me a seal and an Air Force roundel?

The seal would be a play on the American Seal, with a Golden Eagle replacing the Bald Eagle, and A sword replacing the arrows. With the Words, GREAT SEAL OF THE ORGANIZED STATES across the top.

On the Air Force Roundel, could you put the 13 stars on my flag into the circle in the center of the Roundel linked below in place of the single star?
http://en.m.wikipedia.org/wiki/File:Rou ... e_USAF.svg
Roundel of the USAF.svg
organized_states__130747.jpg
“One land for all”

Thank you

Thank you so much! Apologies for the late reply!

[Imagey Nation]

Postby Webus » Mon Oct 13, 2014
My current flag turned 90 degrees clockwise with the yellow and blue portion made longer
The symble (A star with the points as midpoints for 5 other stars (Like it is now)) in the center of the green triangle.
Thx
webus__104070.jpg

Postby Webus » Thu Jan 15, 2015
I would like to change my request.
I would now like:
A horizontal bi-color of black (top) and red, with a white isosceles triangle at the hoist bearing a black star in its center.

Thank you.

[Imagey Nation]

Postby New Educandi » Tue Oct 21, 2014
May I have a seal? Nothing big, just using the colors of my flag (white, black, gold) and the crown symbol please? Thank you, my friend!
new_educandi__127066.jpg
“ Es lebe die Kaiser!”
national animal is the Owl

Thank you.

[Imagey Nation]

Postby Torrumbarry » Tue Oct 21, 2014
Could you please make a logo, with the following:
-Dimensions: 600x400
-The logo should state (in copperplate font, please): LOCKHART INTERNATIONAL
-Could you please incorporate the following symbol (presented in spoiler), situated directly above the writing and centered?
00448-ready-made-Abstract-Art-exclusive-logo-design.jpg
Cheers, mate. Thanks!
Last edited by Torrumbarry on Tue Oct 21, 2014, edited 1 time in total.
torrumbarry__451722.jpg

Thank you.