Advertisement
by The Kuste Islands » Fri Sep 18, 2020 12:00 pm
The Kuste Islands wrote:I’d like a crowned shield on a royal mantle. The shield must be split three ways one third with a white key on red. One third with a black bear on a yellow background with a blue stripe going through the middle and one third with a white cross on red.
The crown I’d like to you to use is that of Spain but if you can, and this is optional. I’d like the crown edited so that the cross at the top and the pearls along the edge are changed to golden keys.
by Pilipinas and Malaya » Mon Sep 21, 2020 5:54 am
Pilipinas and Malaya wrote:Pilipinas and Malaya wrote:May I request a CoA for my country?
These are the requirements I've decided upon:
There are four national animals, each representing the four biggest ethnicities in Pilipinas and Malaya. The Cantonese and other Chinese are represented by an oriental dragon. The Malays are represented by the Malayan tiger. The Indonesians in Sulawesi are represented by the Maleo bird and the Filipinos are represented by the Philippine Eagle. The dragon and the maleo bird should hold up the seal from either side, while the eagle carries the tiger on top of the seal.
My central flag emblem should be in the centre, but with a slight modification this time, there should be another six stars under the present nine stars. It should probably be enclosed in a shield, but I will leave that part up to you.
(https://cdn.discordapp.com/attachments/ ... image0.png) Emblem.
The emblem should be flanked by palm trees.
The palm trees should each have their tiny little island.
Water would be under the seal and islands, but make it a lighter version of the waves on the Spanish CoA.
(https://upload.wikimedia.org/wikipedia/ ... 29.svg.png) Spanish Coat of Arms.
Thanks in advance.
Changed the requirements so that there's more of a guide.
by Greatdux » Tue Sep 22, 2020 6:00 am
liberty.vg: United States of Virginia to collaborate with Voghulia on Mars landing | Cronies of deceased dictator Verzoek Tillinic to be trialed in Sneizssvyatmiklaus | [TILOS MEGNEZNI]
by Great Weraya » Thu Sep 24, 2020 3:04 am
by Old Zealand Founder » Thu Sep 24, 2020 3:17 am
Great Weraya wrote:Hi I’d like a coat of arms that has a red lion on a yellow shield with a crown on top
by Great Weraya » Thu Sep 24, 2020 5:00 am
by Almonaster Nuevo » Thu Sep 24, 2020 5:57 am
Great Weraya wrote:
I’d rather have an original one. So I’ll change my request. Seven red crowns on a crowned shield.
by Walande » Sat Sep 26, 2020 5:14 am
by Greater Kamilistan » Sat Sep 26, 2020 5:17 am
Eiran wrote:Greater Kamilistan wrote:I want an seal request
My seal:
[] Must have the wheat beside the emblem
[] There will be the map of Kamilistan in the shield , with an eagle infront of it. My map can be seen here: Map
[] It will have 5 stars within the shield
[] The motton will be written in the cyrillic alphabet and also In Kamilistani which is Libertai , Uynit , Dekmoricrat Zan Forwete Kamilistania
[] Must have the Islamic Start and Creasent and Orthotox Chistian signed.
News Headlines
Surrendered soldiers of rebel NKFA's regional group said NKFA's main command abandoned them as Armavir regional rebels were losing ground fast | 7th Armavir Free Brigade, alongside few rebel groups as they lose ground to government forces.
by Eurasies » Sun Sep 27, 2020 11:41 pm
Eurasies wrote:Hello, I need help to design the logos of the following Eurasian political parties:
- Transcontinental Conservative Party
- Eurasian Ecologist Party
- Eurasian Monarchical Party
- Eurasian Christian-Democrats
The main colors of these parties are dark blue, green, white, and orange and light blue, respectively.
For inspiration, I would like the TCP logo to have 12 stars forming a circle
The rest of the logos, I will leave them to your own creativity, thank you and I hope you help me
by Walande » Mon Sep 28, 2020 3:46 am
by Greatdux » Mon Sep 28, 2020 4:22 am
Greatdux wrote:Eh, I would like 1 seal and 1 logo.
The seal is going to be a mix of the 2nd Hungarian Republican coat of arms (but as a party per fess with the three crowns from the Swedish coat of arms and the sun from the Smithsonian Insitution plus the 3 fields and cross), and the emblem of the Moldavian Soviet Socialist Republic just with the red ribbon changed to the black raven, ring and sun, the writing not appearing and the red star and hammer and sickle replaced with the aforementioned shield that I wanted.
I also like an logo for TECFOG (The Epic and Cool Forums of Greatdux).
To make it, create a 6-pointed Star, get a cool 80’s font (Cyberway Riders) and there you have it.
Thank you in advance.
Edit: forget the emblem, just go with the shield.
liberty.vg: United States of Virginia to collaborate with Voghulia on Mars landing | Cronies of deceased dictator Verzoek Tillinic to be trialed in Sneizssvyatmiklaus | [TILOS MEGNEZNI]
by The Layfetian Republic » Mon Sep 28, 2020 11:05 am
by Eiran » Mon Sep 28, 2020 2:35 pm
Greatdux wrote:Eh, I would like 1 seal and 1 logo.
The seal is going to be a mix of the 2nd Hungarian Republican coat of arms (but as a party per fess with the three crowns from the Swedish coat of arms and the sun from the Smithsonian Insitution plus the 3 fields and cross), and the emblem of the Moldavian Soviet Socialist Republic just with the red ribbon changed to the black raven, ring and sun, the writing not appearing and the red star and hammer and sickle replaced with the aforementioned shield that I wanted.
I also like an logo for TECFOG (The Epic and Cool Forums of Greatdux).
To make it, create a 6-pointed Star, get a cool 80’s font (Cyberway Riders) and there you have it.
Thank you in advance.
Edit: forget the emblem, just go with the shield.
by Eiran » Mon Sep 28, 2020 4:01 pm
Walande wrote:Forget my other reqeust, this is my final one and it’s for a CoA.
Please use the Coat of arms of Saskatchewan and first of all replace the beaver crest with the winged crest from This arms. Then replace the lion supporter with The Deer Supporter from Here,then change the lion on the shield to gold on red and below it place the otter from my flag on white. The border is optional. All that’s left to do is change the motto to “Fortitudo art innovatio”
Thank you in advance!
by Arells » Mon Sep 28, 2020 4:06 pm
by Almonaster Nuevo » Tue Sep 29, 2020 3:03 am
Eurasies wrote:Eurasies wrote:Hello, I need help to design the logos of the following Eurasian political parties:
- Transcontinental Conservative Party
- Eurasian Ecologist Party
- Eurasian Monarchical Party
- Eurasian Christian-Democrats
The main colors of these parties are dark blue, green, white, and orange and light blue, respectively.
For inspiration, I would like the TCP logo to have 12 stars forming a circle
The rest of the logos, I will leave them to your own creativity, thank you and I hope you help me
Well, the TCP logo they already helped me create, now I discard the Monarchy Party logo.
So I would only need a logo for the environmental party and a logo for Christian Democrats
by Almonaster Nuevo » Tue Sep 29, 2020 3:06 am
by Greatdux » Tue Sep 29, 2020 5:00 am
Eiran wrote:Greatdux wrote:Eh, I would like 1 seal and 1 logo.
The seal is going to be a mix of the 2nd Hungarian Republican coat of arms (but as a party per fess with the three crowns from the Swedish coat of arms and the sun from the Smithsonian Insitution plus the 3 fields and cross), and the emblem of the Moldavian Soviet Socialist Republic just with the red ribbon changed to the black raven, ring and sun, the writing not appearing and the red star and hammer and sickle replaced with the aforementioned shield that I wanted.
I also like an logo for TECFOG (The Epic and Cool Forums of Greatdux).
To make it, create a 6-pointed Star, get a cool 80’s font (Cyberway Riders) and there you have it.
Thank you in advance.
Edit: forget the emblem, just go with the shield.
liberty.vg: United States of Virginia to collaborate with Voghulia on Mars landing | Cronies of deceased dictator Verzoek Tillinic to be trialed in Sneizssvyatmiklaus | [TILOS MEGNEZNI]
by Walande » Tue Sep 29, 2020 7:39 am
Eiran wrote:Walande wrote:Forget my other reqeust, this is my final one and it’s for a CoA.
Please use the Coat of arms of Saskatchewan and first of all replace the beaver crest with the winged crest from This arms. Then replace the lion supporter with The Deer Supporter from Here,then change the lion on the shield to gold on red and below it place the otter from my flag on white. The border is optional. All that’s left to do is change the motto to “Fortitudo art innovatio”
Thank you in advance!
by Greatdux » Tue Sep 29, 2020 7:42 am
Greatdux wrote:Greatdux wrote:Eh, I would like 1 seal and 1 logo.
The seal is going to be a mix of the 2nd Hungarian Republican coat of arms (but as a party per fess with the three crowns from the Swedish coat of arms and the sun from the Smithsonian Insitution plus the 3 fields and cross), and the emblem of the Moldavian Soviet Socialist Republic just with the red ribbon changed to the black raven, ring and sun, the writing not appearing and the red star and hammer and sickle replaced with the aforementioned shield that I wanted.
I also like an logo for TECFOG (The Epic and Cool Forums of Greatdux).
To make it, create a 6-pointed Star, get a cool 80’s font (Cyberway Riders) and there you have it.
Thank you in advance.
Edit: forget the emblem, just go with the shield.
You know what, forget it. I would like the 2001-2004 TVR1 logo but with my flag’s colors: white, green, white, green, white.
The TECFOG logo will be a 6-pointed Star near an sun near text titled ”Da Epik and Kool Vorumz of Greetduks!!!!!!!".
Thank you, in advance.
liberty.vg: United States of Virginia to collaborate with Voghulia on Mars landing | Cronies of deceased dictator Verzoek Tillinic to be trialed in Sneizssvyatmiklaus | [TILOS MEGNEZNI]
by Eurasies » Thu Oct 01, 2020 8:10 pm
by -Rumania » Thu Oct 01, 2020 11:29 pm
Advertisement
Return to Factbooks and National Information
Users browsing this forum: No registered users
Advertisement