Creating Your Own Everything VI [No Advertising]

by **Gallia-** » Wed Apr 20, 2022 2:25 pm

haha spooke box

by **Synne Industries** » Sat Apr 23, 2022 1:22 pm

by **The Corparation** » Sat Apr 23, 2022 2:57 pm

He flap

by **Gallia-** » Sat Apr 23, 2022 5:14 pm

>has no rotor torque

"tail rotor time baybee"

by **Synne Industries** » Sat Apr 23, 2022 5:26 pm

Gallia- wrote:>has no rotor torque

"tail rotor time baybee"

brain short-circuited during the design process

by **Manokan Republic** » Sun Apr 24, 2022 2:42 am

Synne Industries wrote:
Gallia- wrote:>has no rotor torque

"tail rotor time baybee"

brain short-circuited during the design process

Well, what is it designed to do, is it jet powered? We could salvage a reason to have it, and then say it was phased out on later versions after it's impact was considered too marginal to be worth the cost of the design, that is the added complexity. xD

Something to do with stability during vertical take off, maybe powered by an electric motor, so the engines alternator could produce enough electricity for it.

by **Korva** » Mon Apr 25, 2022 11:38 am

by **Gallia-** » Mon Apr 25, 2022 10:20 pm

they dont want you to know about spacio-grecian power armor hoplites

by **Arpasia** » Sat Apr 30, 2022 7:50 am

I made some rifle designs for a possible alt nation, or I might just straight-up give it to another nation.

by **Sevvania** » Sat May 07, 2022 4:05 pm

The support variant pleases me

by **Synne Industries** » Sat May 07, 2022 5:06 pm

by **Gallia-** » Sat May 07, 2022 5:09 pm

good kreturs

by **Arpasia** » Mon May 16, 2022 5:45 am

Hubschrauber Entwürfe.

This design is a mashup of the NHIndustries NH-90, Leonardo AW-159 Wildcat, and Sikorsky UH-60, I also tried to make this design similar to the HSC Attack Helicopter.

I might have should read the scale first, because it looks quite big, I initially wanted it to be slightly smaller than the Bell UH-1. Overall though, this design fits the role of multipurpose helicopter, and might be used by civilian and military purposes.

A militarized version of the above design, nothing really much to say about it, other than it being an "Assault Helicopter" similar to that of the Mil Mi-24 Hind, in which it serves as both troop transport and combat purposes.

B-B-B-BIRD, BIRD, BIRD.

by **Synne Industries** » Tue May 24, 2022 1:34 pm

by **Gothian Crimea** » Tue May 24, 2022 1:51 pm

Why does pixel marshals link to me to "sexy sonic( Starboy (official) ft. Daft Punk)"

by **The Corparation** » Tue May 24, 2022 2:13 pm

If you have to ask, you'll never understand.

Also bote:

by **Arpasia** » Thu May 26, 2022 11:15 pm

MORE BIRD CONTENT!!

Gallanian Navy A-130 Mouette, circa. 1965

Savonian Ground Forces H218 Lupo, circa. 2011

Sutherish Army Aviation Wing UH-8M Fälken, circa. 1988

Sutherish Army Aviation Wing MH-70SL Eagle/Örn

A-WELL A-DON'T YA KNOW? THE BIRD IS THE WORD? WELL, EVERYBODY'S TALKIN' ABOUT THE BIRD!

by **Korva** » Fri Jun 10, 2022 12:42 pm

by **Korva** » Sat Jun 25, 2022 10:02 am

by **Dtn** » Sat Jun 25, 2022 11:00 am

cthulhutech

by **Gallia-** » Sat Jun 25, 2022 11:04 am

based sigils

by **Laka Strolistandiler** » Sat Jun 25, 2022 11:08 am

How much will it approximately cost to commission someone to make me a sideview of an MBT?

This is merely a question about how much stuff usually costs I am not trying to get anyone to buy anything from me pls no ban

by **Gallia-** » Sat Jun 25, 2022 11:22 am

I imagine it depends on the artist, but no one here does commissions or anything because they draw things for themselves, not as a job. There are some guys on DA or ArtStation. You might contact "Tippercommon"/"BCMatsuyama" who does commission drawings possibly, but I think he's busy with his job of illustrating his website, but he's about the only person I can think of who would do commissions off the top of my head that isn't gone from the NS space entirely. The entity known as "Chin" who I don't know his NS nation name for some reason commissioned a side view of a tank and a helicopter though. So if anything you might ask him. "Korva" probably knows as I don't think he's totally scatterbrained like me.

You can also just try drawing stuff and posting it here tbh. The guy who made these threads originally wasn't exactly the Rembrandt of lineart, so you shouldn't feel discouraged to post even relatively primitive drawings or anything. It's not like people will judge you for it, we only judge people who buy commissioned arts (like "Chin") and even then that's limited to saying "commish" or "who drew this one" when they post a new picture. The only way you'll improve is by doing it after all.

This is what my first lineart looked like:

https://www.dropbox.com/s/wqsxcs1d27fuh ... .png?raw=1

A dumb tank that looks like a Black Eagle without the bustle because IDK electric guns that I drew in a high school class instead of paying attention.

This is what my second (actual) lineart looked like:

https://www.dropbox.com/s/dog4pwr8rv2zd ... .png?raw=1

Which I traced (poorly) from an image of a Strf 90 when trying to draw a Strf 90. It's not my actual second lineart, which was either an attempt to draw the hand drawn image in pixel form (I traced a highly shrunk version but never finished it) or a giant landship esque tank. Both are gone so it's not important.

This is what happens when I try to freehand a gun:

https://www.dropbox.com/s/4xsqe9x7jtq6i ... .png?raw=1
https://www.dropbox.com/s/fprym24kfbn8h ... .png?raw=1

This is what it looked like a year later after a few redrafts and using a FAL or G3 as a tracing aid to get the proportions right:

https://www.dropbox.com/s/d0p0m8qi427n3 ... .png?raw=1

This is something I drew a while ago:

https://www.dropbox.com/s/ukc8kvhg9xv7t ... .png?raw=1

...to replace the big chungus G3-FAL thing.

It took a while. Something like a year on and off to get it right. There's a huge gap between the first guns and the M16 thing, although I guess you can see shades of M16 in the "EM2" thing.

https://www.dropbox.com/s/8yp1xbz3owx1f ... .png?raw=1

This is why. I was busy going "bigger is better" and actually attempted to draw a tank at a scale of like...1px:1mm or something dumb.

It started like this...

https://www.dropbox.com/s/5p73kddxsiu93 ... .png?raw=1

Somehow I drew this in GIMP...

https://www.dropbox.com/s/ef0e7ejd6y92q ... .png?raw=1

And then it got to here...

https://www.dropbox.com/s/rz7ur3bm5vihj ... .png?raw=1

But I eventually stopped because it was too big, obviously. So I went back and shrunk the tank and the gun back down to "normal" manageable drawing size and realized dithering exists.

https://www.dropbox.com/s/8ydm3rf5ti4u6 ... .png?raw=1

That led to this. It was mostly helped by having a scaled drawing of an M16 to draw against to keep my mental proportions in check and dithering tbh. And having a lot of free time so my addled brain can draw a few pixels every day. If you want a protip you can find various three-views or "blueprint" drawings of tanks and smush them together in GIMP or MSPaint (the new one in W10) or Paint.net by gathering a big collection of them, taking bits from them, and copy/pasting it into something that looks nice. Then just trace that. It's good to try to keep them all the same size in scale but it's not very important.

FWIW pixel art is also cheaper than buying actual miniatures too:

https://www.dropbox.com/s/zbfc0o7v63c6v ... .png?raw=1
https://www.dropbox.com/s/u6am0h90ece70 ... .png?raw=1

Basically what I'm saying is no one starts out good and everyone has bad linearts at first because it's a skill that requires practice to develop. Don't look at pictures like Korva's and think he started out like that. Dude started out drawing JuniorGeneral things like this: http://i.imgur.com/oIdmzu3.png

OTOH I guess if you don't have free time or have a lot of money (aren't these the same?) you can spend a commission for NSRP but I'd honestly just use a photograph or something.

by **The Corparation** » Sat Jun 25, 2022 12:19 pm

Gallia- wrote:https://www.dropbox.com/s/u6am0h90ece70 ... .png?raw=1

Was that going to be Have sting at the bottom? Did you ever finish he?

by **Gallia-** » Sat Jun 25, 2022 12:25 pm

it's just sitting at the bottom being dumb yes

ill finish it before the heat death of the universe or ww3 atomic war probably

Nuclear Death Machines Here (Both Flying and Orbiting) Orbital Freedom Machine Here	A Subsidiary company of Nightkill Enterprises Inc.	Weekly words of wisdom: Nothing is more important than waifus.- Gallia-
Making the Nightmare End ~~2020~~ 2024	WARNING: This post contains chemicals known to the State of CA to cause cancer and birth defects or other reproductive harm. - Prop 65, CA Health & Safety	This Cell is intentionally blank.

Nuclear Death Machines Here (Both Flying and Orbiting) Orbital Freedom Machine Here	A Subsidiary company of Nightkill Enterprises Inc.	Weekly words of wisdom: Nothing is more important than waifus.- Gallia-
Making the Nightmare End ~~2020~~ 2024	WARNING: This post contains chemicals known to the State of CA to cause cancer and birth defects or other reproductive harm. - Prop 65, CA Health & Safety	This Cell is intentionally blank.

Nuclear Death Machines Here (Both Flying and Orbiting) Orbital Freedom Machine Here	A Subsidiary company of Nightkill Enterprises Inc.	Weekly words of wisdom: Nothing is more important than waifus.- Gallia-
Making the Nightmare End ~~2020~~ 2024	WARNING: This post contains chemicals known to the State of CA to cause cancer and birth defects or other reproductive harm. - Prop 65, CA Health & Safety	This Cell is intentionally blank.

Creating Your Own Everything VI [No Advertising]

Who is online