NS infantry discussion thread. Mark II

[Ea90]

(Image)

Fuk yeh

really early version, getting the big shit down.

very nice

[San-Silvacian]

then you'll like this more~~~

[Black Hand]

then you'll like this more~~~
(Image)

that fixed receiver integrated skeletal stock makes me all sorts of confused and aroused

[Imperializt Russia]

Good for you ford, impressing a woman using firearms, you lucky bastard you.

It ain't luck. It's swag.

But now she wants me to visit and walk across the state with her. Fucking yay.

I'm intrigued as to have you've achieved such a rapport.
Best of luck, son.

[The Archangel Conglomerate]

What's the standard launcher in your nation (at the squad/platoon level)?

The standard launcher of ArchSec forces is the RPG-22, with roughly nine launchers issued per platoon. Next would be the PAW-20, with three per platoon.

[Black Hand]

Bouncing a few ideas around. Reorganizing weapons teams as platoon assets. Each platoon would have 3 squads and a weapons team

mechanized infantry Squad layout prototype
1X NCO
2X automatic rifleman
1X marksman
1X grenadier
1X Anti armor
1X MG gunner
1X MG assistant
5X rifleman

Non-mechanized infantry layout
1X NCO
3X MG gunner
3X MG assistant
3X Anti-armor rifleman
1X marksman
2X rifleman

Assault infantry Squad
1X NCO
4X Grenade rifleman
4X rifleman
2X Automatic rifleman
1X MG gunner
1X MG assistant

rifleman: CR-M 6X36 rnd magazines 2Xfrag Combat knife
NCO: CR-M 6X36 rnd magazines, 2X fragmentation grenades, 2X marking grenades Combat Knife
Automatic rifleman: CAR-L with 8X48rnd magazines or CAR-H 8X 30rnd magazines 1X frag Combat knife
marksman: CMR-L with 6X24rnd magazines or CMR-H 6X18 rnd magazines CP-R Arch Mp-14 1X40rnd magazine 2X20rnd 1X frag, Combat knife
Grenadier: CS-H 80X 30X120 mixed cartridges 1X frag CP-R arch Mp-14 1X40rnd magzinse 2X20rnd Combat knife
Anti-armor: AA-E 105mm 4Rounds HEAT, 1 thermobaric, 1 Fragmentation 1 fragmentation grenade CC-M 4X36rnd magazines combat knife
MG gunner: CMG-M 6X 100rnd belts Cp-R arch Mp-14 1X40rnd magzinse 2X20rnd Combat Knife
MG assistant CR-C 4X36 rnd magazines 4X 100rnd belts 1X frag Combat knife
Anti-Armor rifleman: CR-M 4X36 rnd magazines AA-D 1X frag Combat knife
Grenade rifleman: CR-M w/ 30X120 launcher unit 6X36rnd magazines 20 30X120 mixed cartridges Combat knife

Also because I love the misery of others examine the products on this site (admittedly the Ruger one looks pretty Cool, not normally my thing though)

[Sediczja]

Decided to redraw my service rifle in Flash. I guess I'm kinda happy with how it came out, but the gradients could have been done a bit better.

Any chance you'll make a Recoilless Rifle at some point?

I modelled one in Sketchup once but never actually finished it due to it looking a bit... fucky. I might get round to drawing one sometime soon, though.

Oh and by the way, question to everyone who uses Flash, how would I go about making a gradient follow the curves of what it's filling?

[Bezombia]

Decided to redraw my service rifle in Flash. I guess I'm kinda happy with how it came out, but the gradients could have been done a bit better.

(Image)

Any chance you'll make a Recoilless Rifle at some point?

I modelled one in Sketchup once but never actually finished it due to it looking a bit... fucky. I might get round to drawing one sometime soon, though.

Oh and by the way, question to everyone who uses Flash, how would I go about making a gradient follow the curves of what it's filling?

Looks good, but it looked even better before

[Sediczja]

Decided to redraw my service rifle in Flash. I guess I'm kinda happy with how it came out, but the gradients could have been done a bit better.

(Image)

I modelled one in Sketchup once but never actually finished it due to it looking a bit... fucky. I might get round to drawing one sometime soon, though.

Oh and by the way, question to everyone who uses Flash, how would I go about making a gradient follow the curves of what it's filling?

Looks good, but it looked even better before

You may be right. Eh, can't be amazing at something as soon as I start using it

[Arkandros]

Decided to redraw my service rifle in Flash. I guess I'm kinda happy with how it came out, but the gradients could have been done a bit better.

(Image)

Any chance you'll make a Recoilless Rifle at some point?

I modelled one in Sketchup once but never actually finished it due to it looking a bit... fucky. I might get round to drawing one sometime soon, though.

Oh and by the way, question to everyone who uses Flash, how would I go about making a gradient follow the curves of what it's filling?

Sketchup models actually end up looking better if you make them bigger. 5:1 scale is what I use. It really helps in getting the details fleshed out. They do take a hell of a long time to polish and finish though. I gotta switch to flash.

[Nua Corda]

Decided to redraw my service rifle in Flash. I guess I'm kinda happy with how it came out, but the gradients could have been done a bit better.

(Image)

Any chance you'll make a Recoilless Rifle at some point?

I modelled one in Sketchup once but never actually finished it due to it looking a bit... fucky. I might get round to drawing one sometime soon, though.

Oh and by the way, question to everyone who uses Flash, how would I go about making a gradient follow the curves of what it's filling?

You need to use multiple Radial and Linear Gradients if you want to follow an irregular curve.

Here's a link to download the .fla for Orphanrifle. You can tool around with it and see how I did things: RollerPup

And here's a non-textured version of an RRA PDS that will give you a better idea of how to do irregular curves: PDS

[Sediczja]

Decided to redraw my service rifle in Flash. I guess I'm kinda happy with how it came out, but the gradients could have been done a bit better.

(Image)

I modelled one in Sketchup once but never actually finished it due to it looking a bit... fucky. I might get round to drawing one sometime soon, though.

Oh and by the way, question to everyone who uses Flash, how would I go about making a gradient follow the curves of what it's filling?

You need to use multiple Radial and Linear Gradients if you want to follow an irregular curve.

Here's a link to download the .fla for Orphanrifle. You can tool around with it and see how I did things: RollerPup

And here's a non-textured version of an RRA PDS that will give you a better idea of how to do irregular curves: PDS

Brilliant, thanks.

[Nua Corda]

You need to use multiple Radial and Linear Gradients if you want to follow an irregular curve.

Here's a link to download the .fla for Orphanrifle. You can tool around with it and see how I did things: RollerPup

And here's a non-textured version of an RRA PDS that will give you a better idea of how to do irregular curves: PDS

Brilliant, thanks.

No problem. Let me know if you have any questions.

[United states of brazilian nations]

so people, another in the series of boredom hand-drawning. apologies for crappy quality.

HUErtillery

click here for whole DeviantArt page, including description.

if you missed the previous one, here it is.

does the military plane thread still exist? if so, links plz? gib link plos or i report u HUEHUE

[The Archangel Conglomerate]

I am with question!

.380 ACP necked down to 6.5mm and loaded to ludicrous pressures for machine pistol/PDW.
Y/N?

[Bezombia]

I am with question!

.380 ACP necked down to 6.5mm and loaded to ludicrous pressures for machine pistol/PDW.
Y/N?

No.

.38 ACP necked down to 6.5 and loaded to ludicrous pressures.

Better yet, 8mm Nambu necked down to 6.5

[Nua Corda]

.38 Super +P+ with m/39b-style bullet.

[Kouralia]

Hm... How many pistol rounds do people use here? Do you use multiple, or just one?

In Kouralia three rounds are typically used: .303KourP (basically 7.62x25mm in something like 7..7x26mm), .455Kour (guess) and .45/30 Govt, which is named as an expy of .45/70 Govt (which sounds cool), but is actually a .455Kour case necked down to a .303KourP bullet for much 6.5x25mm CBJ lolage.

[Immoren]

Hm... How many pistol rounds do people use here? Do you use multiple, or just one?

In Kouralia three rounds are typically used: .303KourP (basically 7.62x25mm in something like 7..7x26mm), .455Kour (guess) and .45/30 Govt, which is named as an expy of .45/70 Govt (which sounds cool), but is actually a .455Kour case necked down to a .303KourP bullet for much 6.5x25mm CBJ lolage.

I have just 9x19.

[Bezombia]

Hm... How many pistol rounds do people use here? Do you use multiple, or just one?

In Kouralia three rounds are typically used: .303KourP (basically 7.62x25mm in something like 7..7x26mm), .455Kour (guess) and .45/30 Govt, which is named as an expy of .45/70 Govt (which sounds cool), but is actually a .455Kour case necked down to a .303KourP bullet for much 6.5x25mm CBJ lolage.

We have 7.62x25mm +P+, used in pistols, 7.62x32 Shipunov, used in PDWs, and .45 Nuo, used for special operations.

[Aqizithiuda]

Hm... How many pistol rounds do people use here? Do you use multiple, or just one?

In Kouralia three rounds are typically used: .303KourP (basically 7.62x25mm in something like 7..7x26mm), .455Kour (guess) and .45/30 Govt, which is named as an expy of .45/70 Govt (which sounds cool), but is actually a .455Kour case necked down to a .303KourP bullet for much 6.5x25mm CBJ lolage.

Triggthiuda uses the 7.62x25mm Tokarev as standard, although stocks of 10x25mm ANTO and pistols to fire them are still in service with some reserve units and the police dorce in general. The 7mm Wesi sees some even more limited use, but has almost completely been supplanted by the Tokarev and is planned to be fully pased out by 2020.

[Nua Corda]

.365 Super stamped steel master race.

[Puzikas]

Hm... How many pistol rounds do people use here? Do you use multiple, or just one?

In Kouralia three rounds are typically used: .303KourP (basically 7.62x25mm in something like 7..7x26mm), .455Kour (guess) and .45/30 Govt, which is named as an expy of .45/70 Govt (which sounds cool), but is actually a .455Kour case necked down to a .303KourP bullet for much 6.5x25mm CBJ lolage.

7.62x25mm Tok.
9x18mm.
9x19 7N21, 7N31.
9x21.

[The Archangel Conglomerate]

.38 ACP necked down to 6.5 and loaded to ludicrous pressures.

Better yet, 8mm Nambu necked down to 6.5

Nee.

In my opinion, using the .38 ACP as a base completely misses the point of trying to make a compact, low recoil cartridge for machine pistols.

[Arkandros]

Hm... How many pistol rounds do people use here? Do you use multiple, or just one?

In Kouralia three rounds are typically used: .303KourP (basically 7.62x25mm in something like 7..7x26mm), .455Kour (guess) and .45/30 Govt, which is named as an expy of .45/70 Govt (which sounds cool), but is actually a .455Kour case necked down to a .303KourP bullet for much 6.5x25mm CBJ lolage.

7.62x25mm Tok.
9x18mm.
9x19 7N21, 7N31.
9x21.

I use 2-
.40 S&W (for combat pistols and tanker SMGs)
.460 S&W Magnum (for officer revolvers & shits/giggles)