Main Military Weapon of Your Country, Type-9 [Read OP pl0x]

[Ulfr-Reich]

Here is a desgin I am working on for my German-like nation, and as you can see it is based off the FG-42.... and I now realize that I made the magazine to big >>
(Image)

Okay, the magazine size is a quick fix, but with the stock being all wibbly-wobbly................ well, your troops'll have a fuck of a time using the rifles sights. Otherwise, nice gun, just do some fiddlin' and fixin' and it ought to look nice and spiffy.

Gun porn:

[Moriskov]

Here is a desgin I am working on for my German-like nation, and as you can see it is based off the FG-42.... and I now realize that I made the magazine to big >>
(Image)

Okay, the magazine size is a quick fix, but with the stock being all wibbly-wobbly................ well, your troops'll have a fuck of a time using the rifles sights. Otherwise, nice gun, just do some fiddlin' and fixin' and it ought to look nice and spiffy.

Gun porn:

Woooooops! Fixed that and also made a few aesthetics changes (Mostly the bullets)

[Benomia]

So no answers to my question about the Saritch?

[Purpelia]

Does anyone have any idea about what the diameter of the shroud on a MG34 would be? I just need a rough number so that I can draw on a MG for my tank, nothing really precise.

[Triplebaconation]

Shouldn't be too hard to figure out or look up.

[Purpelia]

I have been trying to for a while now. No luck.

[Sevvania]

I have been trying to for a while now. No luck.

Just eyeball it. It looks like it's roughly three times the diameter of the barrel.

[Purpelia]

I have been trying to for a while now. No luck.

Just eyeball it. It looks like it's roughly three times the diameter of the barrel.

Given the scale I am working on, that will do I guess.

[Triplebaconation]

It's 1.489 inches.

[Anarcho-Leftist States of Horseflip]

[Insert info on 7mm round here]

May I ask where you've acquired your BC measurements?

[Purpelia]

It's 1.489 inches.

Thanks. No idea how you found it but thanks.

In case anyone was wondering this is why I needed it. (BIG IMAGE)

[Bajireyn]

Che was a douche imo.

wearing a beret and a douche-stache really make you a hipster.

And Che was a revolutionary hipster who died a hipster death.

By South Americans.

I'm so tempted to sig this just to wind up the Teenie-Bopping, t-shirt-wearing, never-heard-of-Das-Kapital "Communists" kicking about on NS

MG 34 for page 34:

Do it!

Also, what happened to my HIGHSPEEDLOWDRAGSPESSNAVYOPTICS quote?

[Samozaryadnyastan]

RPO napalm launcher. War crimes at the platoon level!

I have a box of 10 stored in every IFV.

Where are you storing them, a rack on the turret basket?

[Purpelia]

I have a box of 10 stored in every IFV.

Where are you storing them, a rack on the turret basket?

Under the seats.

[Nirvash Type TheEND]

[Insert info on 7mm round here]

May I ask where you've acquired your BC measurements?

Ballistic drag calculator over at border's barrels.

[Samozaryadnyastan]

MG 34 for page 34:
the image that goes here breaks NS posting tools, fuck why

Whyever did belt-drums fall out of favour? So I recall, it was only ever German machine guns up to the MG42 that used them.
Seems so much more compact that the bigass boxes that seem to have come after them.

[Purpelia]

MG 34 for page 34:
the image that goes here breaks NS posting tools, fuck why

Whyever did belt-drums fall out of favour? So I recall, it was only ever German machine guns up to the MG42 that used them.
Seems so much more compact that the bigass boxes that seem to have come after them.

Capacity.

[Samozaryadnyastan]

What, 75 rounds isn't enough?

[Anarcho-Leftist States of Horseflip]

May I ask where you've acquired your BC measurements?

Ballistic drag calculator over at border's barrels.

Why thankyee: This source seems much better than my previous BC calculator. The Meplat feature is a new one for me: How thin could one reasonably get a meplat for ball rounds?

[Nirvash Type TheEND]

Ballistic drag calculator over at border's barrels.

Why thankyee: This source seems much better than my previous BC calculator. The Meplat feature is a new one for me: How thin could one reasonably get a meplat for ball rounds?

I have no idea. I'd just keep tinkering with it until you get the best performance possible.

[Samozaryadnyastan]

Ballistic drag calculator over at border's barrels.

Why thankyee: This source seems much better than my previous BC calculator. The Meplat feature is a new one for me: How thin could one reasonably get a meplat for ball rounds?

Meplats force you into a tradeoff between aerodynamic performance and wounding potential. I think.

[Anarcho-Leftist States of Horseflip]

Meplats force you into a tradeoff between aerodynamic performance and wounding potential. I think.

In a way, though I intend to throw in some gypsy magic like the Russkies did on the 5.45 to help tumbling

I have no idea. I'd just keep tinkering with it until you get the best performance possible.

I'd venture to say the thinnest meplat would make for the best performance, however realistically I understand manufacture may make for flatter meplats on standard jacketed rounds than, say, CNC milled monometal bullets. I've set mine to 0.5mm for the sake of 'realism' for now

[Nirvash Type TheEND]

Meplats force you into a tradeoff between aerodynamic performance and wounding potential. I think.

In a way, though I intend to throw in some gypsy magic like the Russkies did on the 5.45 to help tumbling

I have no idea. I'd just keep tinkering with it until you get the best performance possible.

I'd venture to say the thinnest meplat would make for the best performance, however realistically I understand manufacture may make for flatter meplats on standard jacketed rounds than, say, CNC milled monometal bullets. I've set mine to 0.5mm for the sake of 'realism' for now

You might also take a little bit of weight off, say there's a cavity in the tip, and boom. Lotsatumble.

[Sevestapol]

Stupid NS not being able to determine dimensions of images...

Sevestian main DMR :2019-present

http://s1276.photobucket.com/user/sovietspyder11/media/Qsavi%20armaments/QsaviArmamentsQDMR-213_zps25d65ad9.jpg.html?sort=3&o=0
Name: QDMR-213 (QDMR stands for Qsavi Designated Marksmen Rifle, the 213 stands for "Model-213")
Caliber: 7.59
Manufacturer: Qsavi Armaments
Range: 1.5 kilometers
Sevestian main Service Rifle: circa 2018- present

http://s1276.photobucket.com/user/sovietspyder11/media/Worra%20armaments/ArkisindustriesPRL-432_zps3e1745e5.jpg.html?sort=3&o=3
Your PMG needs work. Might you be interested in a community dedicated to PMG creations right here on NS?
Name: WSSR-432 (WSSR= Worra Sevestian Service Rifle- Model 432)(What can I say? we like our gun manufacturing)

Caliber: 6.28x.29
Manufacturer: Worra Arms and pipes
Range 0.9 Kilometers

Eh, it's some of my older things, haven't used PMG in a long time

[Nirvash Type TheEND]

Eh, it's some of my older things, haven't used PMG in a long time

I didn't ask how old they were. I asked if you'd be interested in a community that focuses on PMG.