If you want a seal or logo

[Imagey Nation]

Postby Upper-Volta » Wed Oct 22, 2014
Hey Imagey, I'm after a coat of arms.
Could you please base it on the North German Confederation coa. Seen here:
http://upload.wikimedia.org/wikipedia/c ... ration.svg
Please replace the crown at the top with this rooster: http://vector-magz.com/wp-content/uploa ... ector1.png
Rooster-Vector1.png
And please use the spears and banners from this COA of Upper Volta and put it on the coa:
http://en.wikipedia.org/wiki/Republic_o ... _Volta.svg
Cheers!
upper-volta__248676.png
“Unité – Travail – Justice”
national animal is the horse

Thank you.

[Imagey Nation]

Postby United Allied Earth Federation » Tue Nov 04, 2014
Can I get a roundel with just the parallelogram on the inside of my flag?
united_allied_earth_federation__488412.jpg

Thank you.

[Imagey Nation]

Hello Imagey Nation! First let me compliment you on the fantastic work you do here. Amazing stuff!

Second, if you ever need any help, I too can do basic flags and such. I did do my own national flag for an example. I also did create the below seal, but only by coloring in the globe and adding the imagery that I wanted, as well as adding the water, mountains, and text. The rest was already in the image I used as my base. (see working image at end of post)

Really what I would like done with this is just some tweaks. If you would like me to post each minor variation that I would like, in a separate post, I will do that, just please let me know.

Id like to have a few very slightly different versions of this, my national seal. If possible both in vector / png (clear background) and jpg. If you can't do that I do understand. Firstly, if you could get rid of the different color square around the center logo of the hammer, sickle, & cog and make it the same red as the rest that would be awesome. If you would like to clean up the bottom where the mountains, water are, that is great, as well as the "Sic Semper Tyrannis" may need to be cleaned up a bit, if you see fit. If you feel you can get the U.S. R. R to fit better, then by all means please do.

As for the variants, Id like one with just the change above. The next couple involve changing the ribbon to the colors of my national flag. If you need me to upload a blank one for you I will. It has a slightly fatter red center stripe, with smaller blue and yellow areas. Id like one like that with the ribbon left blank.

Next, is text on that ribbon contoured to make it look like it is on the ribbon, in a font similar to what I used (or anything that looks to be the best fit) in the same color yellow / gold as the current text. The text should read as follows starting with the top left ribbon: (top left) UNITED, (top right ribbon) SOCIALIST, (middle left ribbon) REPUBLIC, (middle right ribbon) of RESTONIA. If the word of needs capitalised or needs to be placed over with republic, that is fine. I trust your judgement. Perhaps do one where only the top two ribbons on each side are the colors of my national flag as well, and leaving the the bottom two, and center ribbon as solid red.

I was going to see if you could use my national flag as the background of the main center circle, but I feel that may not work due to the yellow on yellow. Perhaps also just do one where the start at the top are the colors of my national flag (horizontally).

I think that is it for now. Thank you so much for all of your great and hard work! It is much appreciated.
(Image)

First: thank you.
Second: If choose to do flag, post that will do. Also try satisfy request with changes if necessary. Not more than two variants.
Third: record this as request for

Firstly, if you could get rid of the different color square around the center logo of the hammer, sickle, & cog and make it the same red as the rest that would be awesome. If you would like to clean up the bottom where the mountains, water are, that is great, as well as the "Sic Semper Tyrannis" may need to be cleaned up a bit, if you see fit. If you feel you can get the U.S. R. R to fit better, then by all means please do.

Please post each variant as separate request. Each delivered as complete.
Thank you.

[United Socialist Republic of Restonia]

Hello Imagey Nation! First let me compliment you on the fantastic work you do here. Amazing stuff!

Second, if you ever need any help, I too can do basic flags and such. I did do my own national flag for an example. I also did create the below seal, but only by coloring in the globe and adding the imagery that I wanted, as well as adding the water, mountains, and text. The rest was already in the image I used as my base. (see working image at end of post)

Really what I would like done with this is just some tweaks. If you would like me to post each minor variation that I would like, in a separate post, I will do that, just please let me know.

Id like to have a few very slightly different versions of this, my national seal. If possible both in vector / png (clear background) and jpg. If you can't do that I do understand. Firstly, if you could get rid of the different color square around the center logo of the hammer, sickle, & cog and make it the same red as the rest that would be awesome. If you would like to clean up the bottom where the mountains, water are, that is great, as well as the "Sic Semper Tyrannis" may need to be cleaned up a bit, if you see fit. If you feel you can get the U.S. R. R to fit better, then by all means please do.

As for the variants, Id like one with just the change above. The next couple involve changing the ribbon to the colors of my national flag. If you need me to upload a blank one for you I will. It has a slightly fatter red center stripe, with smaller blue and yellow areas. Id like one like that with the ribbon left blank.

Next, is text on that ribbon contoured to make it look like it is on the ribbon, in a font similar to what I used (or anything that looks to be the best fit) in the same color yellow / gold as the current text. The text should read as follows starting with the top left ribbon: (top left) UNITED, (top right ribbon) SOCIALIST, (middle left ribbon) REPUBLIC, (middle right ribbon) of RESTONIA. If the word of needs capitalised or needs to be placed over with republic, that is fine. I trust your judgement. Perhaps do one where only the top two ribbons on each side are the colors of my national flag as well, and leaving the the bottom two, and center ribbon as solid red.

I was going to see if you could use my national flag as the background of the main center circle, but I feel that may not work due to the yellow on yellow. Perhaps also just do one where the start at the top are the colors of my national flag (horizontally).

I think that is it for now. Thank you so much for all of your great and hard work! It is much appreciated.
(Image)

First: thank you.
Second: If choose to do flag, post that will do. Also try satisfy request with changes if necessary. Not more than two variants.
Third: record this as request for

Firstly, if you could get rid of the different color square around the center logo of the hammer, sickle, & cog and make it the same red as the rest that would be awesome. If you would like to clean up the bottom where the mountains, water are, that is great, as well as the "Sic Semper Tyrannis" may need to be cleaned up a bit, if you see fit. If you feel you can get the U.S. R. R to fit better, then by all means please do.

Please post each variant as separate request. Each delivered as complete.
Thank you.

You're most welcome.

Also I will go back and do a separate post for each variant. I have not posted a request here before so I want to make sure I get it right.

That said, this posting will serve as the request for the second variant. This variant is simply changing the ribbon to the colors of my national flag. If you need me to upload a blank one for you I will. It has a slightly fatter red center stripe, with smaller blue and yellow areas. Id like one like that with the ribbon left blank. Request for variant 3 is next.

Thank you very much! Cheers.

[United Socialist Republic of Restonia]

The next variant is text on that ribbon contoured to make it look like it is on the ribbon, in a font similar to what I used (or anything that looks to be the best fit) in the same color yellow / gold as the current text. The text should read as follows starting with the top left ribbon: (top left) UNITED, (top right ribbon) SOCIALIST, (middle left ribbon) REPUBLIC, (middle right ribbon) of RESTONIA. If the word of needs capitalised or needs to be placed over with republic, that is fine. I trust your judgement. Perhaps do one where only the top two ribbons on each side are the colors of my national flag as well, and leaving the the bottom two, and center ribbon as solid red. (If this counts as too I apologise. Just let me know and I will submit the last sentence above as a separate one). Thank you!

[United Socialist Republic of Restonia]

Next variant: please see if you could use my national flag as the background of the main center circle, but I feel that may not work due to the yellow on yellow. If that will not work (which I suspect it may not) Perhaps also just do one where the star at the top are the colors of my national flag (horizontally). If it works both ways then that is great as well. Thank you!

[United Socialist Republic of Restonia]

Next variant: please see if you could use my national flag as the background of the main center circle, but I feel that may not work due to the yellow on yellow. If that will not work (which I suspect it may not) Perhaps also just do one where the star at the top are the colors of my national flag (horizontally). If it works both ways then that is great as well. Thank you!

Finally, if you could, use this above quoted variant, on all prior variants requested. If you need more clarification please let me know. Thank you so much! Much appreciated!

[The Fallen Jedi]

Imagery, did you recieve my most recent request.

[New Roma Republic]

Postby New Roma Republic » Thu Oct 09, 2014
Can you create my nation a Coat of Arms? If you can, please include:
gZbRkTP.png
Also, please include my flag and a space type theme in it. If you need anymore ideas, you could look through my factbook.
Last edited by New Roma Republic on Thu Oct 09, 2014, edited 2 times in total.
new_roma_republic__61307.jpg

]
Thank you.

Thanks a lot Imagey, it looks great! Definitely worth the wait!

[Krostovia]

Hello fellow nations,

I was referred here from another artist in order to complete a flag project. My intention was to emulate the Austrian state and war flag, below:
http://en.wikipedia.org/wiki/List_of_Austrian_flags#mediaviewer/File:Flag_of_Austria_%28state%29.svg
The current project is near completion save a bit of royal flavor and a seal. I would like something displayed at the breast of the bird like the Austrian flag, but in order to make is more suitably Krostovian, I’d like to change up the seal a bit. The nation was formed via a personal union with another Duchy, so the seal should reflect such. The corvus (on the flag attached below) and the arrow are foundational to Krostovia myth.
https://bulbajer.files.wordpress.com/2015/03/krostovia.png

I had the following image of ravens impaled in mind for the Krostovian side (the left) but with the field itself colored in some suitably Germanesque manner in scarlet and gray.
http://upload.wikimedia.org/wikipedia/commons/thumb/3/3f/Mackie_of_Larg_arms.svg/2000px-Mackie_of_Larg_arms.svg.png

The division for the field should be party per pale. Opposite the Krostovian side is a tower, the color of the field being a violet and black (although I'm open to color experimentation if this turns out horrible). The center should have a bordered roundel with a cross fourchee within it with whatever colors seem to work well, as a monastic state has since been added to the Grand Duchy. Krostovia’s national religion is that of Roman Catholicism, so any suitable Catholic or Germano-Austrian designs would be most appreciated.

Any additional flavor to the corvus would be welcome as well, perhaps regal ornaments, but no crown. I was thinking a chain similar to the Order of the Golden Fleece. I've tried experimenting in paint myself, but I've come to realize I'm woefully unskilled when it comes to both the program and design, so I reached out to artists here on nationstates for help. As the description above attests, there are certain things I'm looking for, but I think I'm confident enough to permit a wide berth when it comes to artistic liberty, so long as it conveys a suitably monarchical and imperial flavor. Any help with this would be greatly appreciated!

[New Lexington]

Could I have a National Seal of similar design to this, but the flags being my nation's obviously, and the image within the frame at the center could instead be this image, minus the blue border with Culpeper Virginia and 1789 and minus the white banner at the bottom below the soldiers. Instead of it saying "Liberty or death" it should say "Freedom is not Free". Finally, remove the condor at the top, and the plants in the flags and replace the fasces at the bottom with crossed muskets.

I understand if this is too much to pull off, but if you can do it, i couldn't thank you enough.

Hi, this is HF but on an alt, so just an update so that the request now fits this nation instead.

Instead of saying "Freedom is not free", could it say "Carry Proudly the Banner of Ol' Lady Lex". Also, insteadof removing the blue border around the soldiers, keep it and put "The Confederate States of New Lexington" inside it instead of Culpeper Virginia and the date.

[Icrum]

Can I get a seal with the mountain on my flag surrounded by a wreath, a yellow circle background, and the phrase "Ahol Mások Estek, Sikerülni Fog" on a banner underneath it?

[The Empyreus]

G'day old chap!
I would like to reqeust a seal for my nation
-Crest
-Remove the cross on the center
-Background inside the crest is darkish purple
-Use this symbol for the center http://fc02.deviantart.net/fs71/f/2011/314/6/b/nemesis_glow_by_saiyaness_n_goddess-d47vecy.png (Remove the red watermark below) and also my symbol on the center of the flag
-Motto in the upper part of the crest
Thanks!

http://www.officialpsds.com/images/thumbs/CREST-WITH-WINGS-psd25496.png (for the cross part)

[The Northern Kingdoms]

I wish for a coat of arms that resembles my flag.

Make the supporters pegasus, the top a royal crown and a mantle to go with it. The motto is "Peace and Progress".

[Trinley]

I want a seal and coat of arms for my region. Both must be different and must reflect Royal sovereignty. My region is United Sovereigntist States

[Leritorius]

Errm, Imagey... I don't wanna be an awful pick, but I see that you are actually doing requests ordered in september, october and november... and I'm still waiting for my CoA request made in early July. Any news ?

[Gig em Aggies]

I'm back this time with something mor complex well just a little.

I would like this logo

http://fc03.deviantart.net/fs71/i/2013/273/7/a/coat_of_arms_of_the_german_empire_by_tiltschmaster-d6onv7d.png

but with my flags in the same arrangement. Instead of the eagle I would like the logo in my flag, I also want the star at the top removed. And I want the shield to be white or a slight light grey

And then behind the flags and the shield on the left I would like this image

http://3.bp.blogspot.com/-8X7wIcumkpg/UQESaf_m5jI/AAAAAAAAWH0/1xE36VVmnhM/s1600/soldier6_jessica.jpg

And on the right I would like this image

http://ilarge.listal.com/image/2840520/936full-mary-elizabeth-winstead.jpg

*And in the center I want this image but slightly higher then the other two

* on the third image in the center try to not show so much of the capes flare

[Gig em Aggies]

Errm, Imagey... I don't wanna be an awful pick, but I see that you are actually doing requests ordered in september, october and november... and I'm still waiting for my CoA request made in early July. Any news ?

Sometimes he does reqeust that are made after other as they are probably less complex then other ones so they take less time if he forgot just send him a tg. Hope this helps?

[Leritorius]

Errm, Imagey... I don't wanna be an awful pick, but I see that you are actually doing requests ordered in september, october and november... and I'm still waiting for my CoA request made in early July. Any news ?

Sometimes he does reqeust that are made after other as they are probably less complex then other ones so they take less time if he forgot just send him a tg. Hope this helps?

I gues sI'll send him a TG, since my request of a simple shield is simple enough confronted to other requests of seal edits with angels, lions and stuff... but thx anyway

[New Roma Republic]

Imagey, could you please make the spoliered image better than it does? Thank you!

[New Roma Republic]

Imagey, could you please make the spoliered image better than it does? Thank you!

[New Roma Republic]

Imagey, could you please make the spoliered image better than it does? Thank you!

[Webus]

Postby Webus » Mon Oct 13, 2014
My current flag turned 90 degrees clockwise with the yellow and blue portion made longer
The symble (A star with the points as midpoints for 5 other stars (Like it is now)) in the center of the green triangle.
Thx
webus__104070.jpg

Postby Webus » Thu Jan 15, 2015
I would like to change my request.
I would now like:
A horizontal bi-color of black (top) and red, with a white isosceles triangle at the hoist bearing a black star in its center.

Thank you.

Thank you so much for the flag!

[Amuaplye]

How is my party logos doing?

[Savu]

Hey, I was looking for a seal with a red star in the middle, with the national colors to the side, with two bears holding up the crest with our motto "Epper si Muove" underneath.

Here is the flag for reference:http://imgur.com/cyyeP8c