NationStates

Posted: **Wed Sep 17, 2014 4:30 pm**

Postby Galmorra » Mon May 12, 2014
I have a logo request.
I would like to see an Ouroboros with a mythical Phoenix rising from the ashes. The phoenix symbol should be rounded, and fit within the ring of the ouroboros.
Thank you for considering my reuest. Good day ^_^

Thank you.

Posted: **Wed Sep 17, 2014 4:39 pm**

Divergia wrote:
Originial Request:

Um Imagey I think you might have skipped me.... I submitted my request March 29, here is the Edit(May 24th):

Ahem Imagey

Ahem...
request several design need more time than single design,
complex, complicated design with several elements needs more time than simple design,
complex, complicated elements need more time than simple elements,
several complex, complicated design with several complex, complicated elements need more time.
Ahem request for six complex, complicated design is in process. When all complete will be delivered.

Posted: **Wed Sep 17, 2014 8:08 pm**

Imagey Nation wrote:
Divergia wrote:
Ahem Imagey

Ahem...
request several design need more time than single design,
complex, complicated design with several elements needs more time than simple design,
complex, complicated elements need more time than simple elements,
several complex, complicated design with several complex, complicated elements need more time.
Ahem request for six complex, complicated design is in process. When all complete will be delivered.

Alright Thank you for clarifying Imagey!

Posted: **Thu Sep 18, 2014 10:40 am**

I guess mine is going to take longer because I edited it, but seriously you should get someone to help you, from how long it takes a request I have estimated that mine will be completed december of next year. If I sound like I'm moaning, I'm not.

Posted: **Thu Sep 18, 2014 11:29 am**

I request a seal with the GTA V trio on it, based on the American seal.

That's it.

Posted: **Fri Sep 19, 2014 8:06 am**

Hi, Imagey. I need your help.

I need this design. The hammer-and-sickle and the sun should be removed, and the blank space is to be filled in later. Recolor the star with the same shade of gold of the wheat/hammer-and-sickle/sun earlier. Erase all traces of words from the interwoven ribbon and turn it from red to jet black.

Onto the blank space, here's how it should be done: add a cogwheel at above the central ribbon, and insert the factory-and-fields-and-dam behind it, leaving just enough space between everything them and the golden star. Move the factory to the left, and place the power pylon in this emblem to the right side of the factory, with power lines to connect them. Turn the bluish water from the Democratic Kampuchea emblem to the whitish color of the dam waters seen in the North Korean emblem. If there's still enough space left between the star and the power grid/factory, add four smaller versions of the original star that revole around it, in a fashion similar to the PRC national emblem.

If it's legitimate, add cotton and potatoes in a manner not unlike how the cotton is in this one.

Posted: **Fri Sep 19, 2014 5:40 pm**

I'd like a Germanic style eagle, such as this:
https://img.4plebs.org/boards/pol/image/1395/83/1395835985344.jpg
But in based off this (either edited to look like, or if you're up to it, made to look like):
http://fc05.deviantart.net/fs70/i/2013/172/c/c/talonflame_by_all0412-d6a1mv2.jpg

Either holding a banner stating 'Do zbroji, hromadjani!' or with that on a banner underneath it.
On some kind of shield or other background if appropriate.. Keep in mind that it will go on the centre of my vertical tricolour of black, white and orange.

EDIT:
Since Greater Beggnig is a republic, I'd like it to not have a crown or sceptre, like so:

But don't use this eagle as a template, the wings are too wide in my opinion.
Thanks.

Posted: **Sun Sep 21, 2014 1:57 am**

Imagey Nation wrote:
Postby Gigaverse » Fri Apr 11, 2014
Hey Imagey. I think I shall need to make another request.
It's going to be simple. Take my current flag, get rid of the symbol that's on it, and replace it with the symbol on the mask of this picture.
sentai1261.jpg
Color the new symbol and the two lines in bright, pure red (255 - 0 - 0 on the RGB scale). If it's possible, make sure that the background of the flag is pure black (0 - 0 - 0 on the RGB scale), and make it larger for me.

Postby Gigaverse » Fri Apr 11, 2014
Also, please don't make it so that the symbol is too large (like the current flag, which causes the sight of the lines to be minimized).
Thank you for paying attention!

Postby Gigaverse » Tue Apr 22, 2014
May I also ask for another version with the phoenix on the upper left corner of a black background, with a somewhat-thick vertical red column going on the right side? Thank you for paying attention!
(Image)
(Image)

Postby Gigaverse » Thu Aug 28, 2014
Is there any way to make the symbol smoother, and the five "feathers" of each wing longer?
Last edited by Gigaverse on Thu Aug 28, 2014, edited 1 time in total.
gigaverse__78216.png

(Image)

Postby Gigaverse » Wed Sep 03, 2014
Perhaps this will be the last time I ask for a change... :/ : Preferably with the "feathers" thinned and sharpened.
Make those wings edgy like the eagle in my current flag.
I apologize for bothering you... again.
gigaverse__78216.png

?

Thank you.

Took me a while to ask again, but...

Here's the shape as I envisioned.

Also, I need a new symbol. I request that it is a cross, not dissimilar from the Christian cross, but with silver sword-like arrows that have gold covering them on the outside. (Preferably, I need the vertical piece to be an Excalibur-like blade.) When everything's done, have the skull here placed on the intersection of the arrows.

Once again, thank you for your diligent work, Imagey.

Posted: **Tue Sep 23, 2014 2:42 pm**

Postby The New American commonwealth » Wed May 21, 2014
22 stars on the out scrits.
-shield with 14 stars at top, White Stars of course and the background is Blue.
-bottom half of shield their is 13 Red and White Stripes/
-above the shield the National Motto of the Commonwealth is their.
“With God, all things are possible ”
the_new_american_commonwealth__202649.png

Thank you.

Posted: **Tue Sep 23, 2014 2:45 pm**

Postby Stasnov » Thu May 22, 2014
Hey man, i would like to make a request on behalf of the Communist Pact. So, i would like a seal with a handshake symbol like the Warsaw Pact, a hammer and sickle on the background, an inscription "Proletarian Brotherhood and Unity" and below it "The Communist Pact" and Soviet style wreaths surrounding the central emblem. Use Red, yellow and other colors related to Communism and Socialism. Thank you

Thank you.

Posted: **Tue Sep 23, 2014 2:46 pm**

Postby Estenia » Fri May 23, 2014
I want yu to make my coat of Arms that is in my flag.
estenia__139930.png
“Fight for the country, fight for dreams”
national animal is the Estenian Combra

Thank you.

Posted: **Tue Sep 23, 2014 2:49 pm**

Imagey Nation wrote:
Postby Grenartia » Fri May 02, 2014
I'd like some classic WWII nose art. I was thinking like the Flying Tigers' Shark Mouth, except instead of a shark on a P-40, an alligator on a Spitfire.

TG by The Allied Technocratic Worlds of Grenartia 290414
Just a question, but would you be willing to work on some nose art for me for a P2TM RP I'm in?

TG reply
This?
"Nose art is a decorative painting or design on the fuselage of a military aircraft."
If so, post request in thread
viewtopic.php?f=23&t=13567&start=8125
will attempt. Delivery in thread.
Thank you.

Thank you.

Muchas gracias!

Posted: **Tue Sep 23, 2014 2:52 pm**

Postby Lisbane » Sat May 24, 2014
can you put
zB1qxBN.jpg
with gold stars around it and my motto below on a scroll and my national animal somewhere and on a scroll above it put in russian "Peace will prevail"
Thank you,
Lisbane
lisbane__634245.jpg
“Never forget the past,Never underestimate the future ”
national animal is the Cat

Postby Lisbane » Fri May 30, 2014
can you put
fugxpiH.jpg
but make the hand blue and put a hand with a hammer and sickle
with gold stars around it and my motto below on a scroll and my national animal somewhere and on a scroll above it put in russian "Peace will prevail"
Thank you,
Lisbane
Last edited by Lisbane on Fri May 30, 2014, edited 1 time in total.

Postby Lisbane » Sat Aug 23, 2014
I would like to edit my request:
Could you get rid of the hand with the rose in it, have two hands with a hammer in one and a sickle in the other one. Still with the stars around it, and no national animal and everything else the same, My motto now is Free from all Corruption put that in russian, also could you put that on a passport but the word passport in russian, also could I have a passport that instead of passport it says VIP.
Last edited by Lisbane on Sat Aug 23, 2014, edited 1 time in total.

Thank you.

Posted: **Tue Sep 23, 2014 2:56 pm**

Lisbane wrote:I guess mine is going to take longer because I edited it, but seriously you should get someone to help you, from how long it takes a request I have estimated that mine will be completed december of next year. If I sound like I'm moaning, I'm not.

Is now December, 2015.

Posted: **Tue Sep 23, 2014 4:25 pm**

Imagey Nation wrote:
Lisbane wrote:I guess mine is going to take longer because I edited it, but seriously you should get someone to help you, from how long it takes a request I have estimated that mine will be completed december of next year. If I sound like I'm moaning, I'm not.

Is now December, 2015.

Imagey, Isn't that much of an exaggeration? I mean, That's more than a year. I guess the same goes for me since I edited mine aswell, But quoted my previous and original request.

Posted: **Tue Sep 23, 2014 4:27 pm**

To whom it may concern,

FIRST of all, thank you for doing this.
SECOND of all, I would like a company logo, a good one, Sort of like this one (which is my current logo): http://forum.nationstates.net/viewtopic.php?f=6&t=283588
THIRD of all, can some part of it be transparent? This is because I don't want a block of a image like the one I have currently.
FORTH of all, once again, Thanks

TG for any more info or questions, thanks! (for the 3rd time :lol:

)

-Ky
P.S. I would like to also have all the words that I already have on it on the knew one, Now for the 4th time: Thanks a bunch! :rofl:

P.S.S. Also, I would like to complement you on your previous things you have created, BEAUTIFUL!

Posted: **Sat Sep 27, 2014 1:27 pm**

Postby Gigaverse » Fri Apr 11, 2014
Hey Imagey. I think I shall need to make another request.
It's going to be simple. Take my current flag, get rid of the symbol that's on it, and replace it with the symbol on the mask of this picture.
sentai1261.jpg
Color the new symbol and the two lines in bright, pure red (255 - 0 - 0 on the RGB scale). If it's possible, make sure that the background of the flag is pure black (0 - 0 - 0 on the RGB scale), and make it larger for me.

Postby Gigaverse » Fri Apr 11, 2014
Also, please don't make it so that the symbol is too large (like the current flag, which causes the sight of the lines to be minimized).
Thank you for paying attention!

Postby Gigaverse » Tue Apr 22, 2014
May I also ask for another version with the phoenix on the upper left corner of a black background, with a somewhat-thick vertical red column going on the right side? Thank you for paying attention!
(Image)
(Image)

Postby Gigaverse » Thu Aug 28, 2014
Is there any way to make the symbol smoother, and the five "feathers" of each wing longer?
Last edited by Gigaverse on Thu Aug 28, 2014, edited 1 time in total.
gigaverse__78216.png

(Image)

Postby Gigaverse » Wed Sep 03, 2014
Perhaps this will be the last time I ask for a change... :/ : Preferably with the "feathers" thinned and sharpened. Make those wings edgy like the eagle in my current flag.
I apologize for bothering you... again.
gigaverse__78216.png

(Image)

Postby Gigaverse » Sun Sep 21, 2014
Took me a while to ask again, but...
Here's the shape as I envisioned.
15107617709_68ddeb7517_b.jpg
=>(Also, I need a new symbol. I request that it is a cross, not dissimilar from the Christian cross, but with silver sword-like arrows that have gold covering them on the outside. (Preferably, I need the vertical piece to be an Excalibur-like blade.) When everything's done, have the skull here placed on the intersection of the arrows.
Yd1qB.jpg
Once again, thank you for your diligent work, Imagey.

Thank you.

Posted: **Sat Sep 27, 2014 1:30 pm**

Postby New Euthenia » Sun Apr 20, 2014
v153_20060026_arms_SP.jpg
Can you make the banner say "One mind, one goal, one heart, one soul" instead of made-up words and make the background transparent? Can you also replace Santa's pets with a penguin and a seal?
Last edited by New Euthenia on Sun Apr 20, 2014, edited 1 time in total.

Thank you.

Posted: **Sat Sep 27, 2014 1:36 pm**

Postby -The Trade Federation- » Tue Aug 12, 2014
I'm only asking for an acceptable combination of this:
http://media-cache-ak0.pinimg.com/736x/ ... cc76f1.jpg
00c7636f1db171a6c5386d2ce3cc76f1.jpg
And this:
http://img3.wikia.nocookie.net/__cb2008 ... Symbol.jpg
Trade_Federation_Symbol.jpg
Thank you.

[/URL]
Thank you.

Posted: **Sat Sep 27, 2014 1:39 pm**

Postby The United Confederacy of Texas » Fri Aug 15, 2014
I'm looking for both a coat of arms and a seal. On the coat of arms, I need a shield, with a Reichsadler on the top of the shield. On the shield, I need the saltire and 13 stars on the national flag occupying it. Also, I need two Golden Eagles, both with wings shut and in mid-shriek facing each other, bracing the shield. For the bottom of the emblem, I just need the eagles to have one foot placed on an asphalt rectangle, nothing else.

For the seal, I need a circular design with a saw-back machete on the bottom of the circle. Floating above the sawback, I need a black rifle and cog wheel, placed similar to the hammer and sickle design, on top of a white 5-pointed star. Other than that, that should be it.
the_united_confederacy_of_texas__719305.jpg

Thank you.

Posted: **Sat Sep 27, 2014 1:42 pm**

Postby Burleson » Tue Aug 19, 2014
I would like a seal for my nation. It should have a southern USA feel and a tropical feel. Thanks in advance
burleson__665058.jpg

Thank you.

Posted: **Sat Sep 27, 2014 1:45 pm**

NEW REQUIREMENT

Single request for multiple designs no longer accepted.
Instead, post separate request for each design desired.

Example:
request for seal OR logo OR coat of arms OR flag OR other = 1 design = 1 post
requests for seal AND logo AND coat of arms AND flag AND other = 5 designs = 5 posts

Each design will be delivered as completed.

Hope this will reduce wait.
Thank you.

Posted: **Sat Sep 27, 2014 3:08 pm**

Imagey Nation wrote:
Postby Lisbane » Sat May 24, 2014
can you put
zB1qxBN.jpg
with gold stars around it and my motto below on a scroll and my national animal somewhere and on a scroll above it put in russian "Peace will prevail"
Thank you,
Lisbane
lisbane__634245.jpg
“Never forget the past,Never underestimate the future ”
national animal is the Cat

Postby Lisbane » Fri May 30, 2014
can you put
fugxpiH.jpg
but make the hand blue and put a hand with a hammer and sickle
with gold stars around it and my motto below on a scroll and my national animal somewhere and on a scroll above it put in russian "Peace will prevail"
Thank you,
Lisbane
Last edited by Lisbane on Fri May 30, 2014, edited 1 time in total.

Postby Lisbane » Sat Aug 23, 2014
I would like to edit my request:
Could you get rid of the hand with the rose in it, have two hands with a hammer in one and a sickle in the other one. Still with the stars around it, and no national animal and everything else the same, My motto now is Free from all Corruption put that in russian, also could you put that on a passport but the word passport in russian, also could I have a passport that instead of passport it says VIP.
Last edited by Lisbane on Sat Aug 23, 2014, edited 1 time in total.

Thank you.

Well I was wrong, thank very much better than I expected also very speedy even though I said it was taking a while, thank you o's much

Posted: **Sat Sep 27, 2014 3:20 pm**

Imagey Nation wrote:
Postby The United Confederacy of Texas » Fri Aug 15, 2014
I'm looking for both a coat of arms and a seal. On the coat of arms, I need a shield, with a Reichsadler on the top of the shield. On the shield, I need the saltire and 13 stars on the national flag occupying it. Also, I need two Golden Eagles, both with wings shut and in mid-shriek facing each other, bracing the shield. For the bottom of the emblem, I just need the eagles to have one foot placed on an asphalt rectangle, nothing else.

For the seal, I need a circular design with a saw-back machete on the bottom of the circle. Floating above the sawback, I need a black rifle and cog wheel, placed similar to the hammer and sickle design, on top of a white 5-pointed star. Other than that, that should be it.
the_united_confederacy_of_texas__719305.jpg

Thank you.

Thank you, dear sir/madam

Posted: **Tue Sep 30, 2014 4:44 pm**

Imagey do you do maps?

NationStates

If you want a seal or logo