If you want a seal or logo

[Aeternabilis]

Postby Aeternabilis » Thu Mar 13, 2014
I would like to request a seal based off my current shield with the knot of eternity on it. It should use the three colors on my flag, and use symbols of monarchy. I'm really not picky, just make it look fancy. Thank you.
aeternabilis__142201.jpg
“Aeternabilis Stronk”
national animal is the Griffon

Thank you.

Wow, that's great. Thanks again.

[New Terricon]

I would like to request a seal since I have seen what a good job you've done on others:

I am looking for a seal that has the outer ring like that of the East German flag. But instead of the German colored flag ribbons around the wheat, I want the colors to be black, red, blue and white in any order you feel that would work. Except at the bottom center of the flag ribbons, there I want it to just be solid red.Here's the East Geman seal for reference.
As for the actual devices on it would include a hand holding a red flag with an irish knot in the symbol. Please do NOT include the letters below the symbol at the top and make it gold. Across the bottom of the flag ribbons (the solid red section), I want the inscription: Terricon für alle Völker. And where the two wheat ribbons meet at the top, I ask for the star on my flag to be the object joining them.

If this is too difficult, I can revise the design. But I thank you in advance and can't wait to see how it turns out.

[Snakelan]

Hello, Comrade. I wish to have a coat of arms for my nation. And, to help a little in the process, Here's the template I want.

(Image)

I would like for the shield to be red, Along with the bottom image being on the top(You can recolor the bottom image to be yellow so it can be on the shield).

(Image)

I also want snakes to be on the sides of the shield, too, since they are Snakelan's national animal. I also want the Snakelanese motto to be on the....Uh, I forgot what the thing where the motto goes was called. Hehe, Sorry. I also want four gold stars near the corners of the upper part(The half of the shield not covered by the...thing the motto goes on) of the shield, Similiar to that of the Snakelanese Flag. So, Yeah, that's about it.

Imagey, If I may, I would like to change my request. I now want my seal to be similiar to that of The Ukranian Soviet Socialist Republic, But with a the sun and hammer and sickle replaced with a Snakehead and have four hammer and sickles in the corners of the shield. I would also like if you could edit two red flags behind the shield, So they'll kinda look like there flying over the shield. I also want the star on the top of the emblem changed into a hammer and sickle star. I also want the the Ukranian text to be changed so it'll say "Unite under our mighty, crimson red flag, Workers!". And, I think that's about it. Thank you very much if you recieve this.

[Boston and Surrounding Provinces]

Hey Imagey,

I would like a circular logo with:

In the center: A lit torch with a coiled snake on it. On the top coil, I would like it to read "Vitam" the next to say "Ac" and the last to say "Libertatem."

Around the Top: I would like it to say "Liberty Front"

Around the Bottom: I would like it to say "Libertatis."

[Imagey Nation]

Postby Belique » Sat Mar 29, 2014
I would like to order several things please:
1. A Country Seal, with Bourbon French and Hapsburg influences. Please have a curtain over the back, and please make sure to include Roman Catholic symbols please.
2. That seal on a passport with Austrian German and French spellings of passport on it please. Please have the passport be black with the lettering and symbol of etched gold.
3. A letterhead of the King's of Belique's Office, "King of Belique, and Emperor of the Belguois Empire" under the seal above. Please have the address: "12095 Roussillion Avenue" as the address. Please make it in a small circle or as you made Bresdenn's.
4. A seal for the royal house of Stanonise, with Polish-Lithuanian and Czech influences. Please make all of these, and I would be eternally grateful.
belique__939038.jpg

country seal - inescutcheon Bourbon lilies over Hapsburg eagle, order medal Papal arms with Jerusalem cross



Stanonise arms

Thank you.

[Imagey Nation]

Postby Imperia Eterna » Sun Mar 30, 2014
Hey Imagey, i have a request for two different flags. They are both based off the Serbian flag, however I'd like the first variation to have the man from "remove kebab" photoshopped over the serbian coat of arms. The second variation would have the coat of arms removed, and with a § sign in the middle. While I wouldn't mind if it is in a coat of arms to look tasteful, if you go down that route, please have a bear and lion holding the coat of arms. Thanks in advance.

Thank you.

[Imagey Nation]

Postby Parhe » Wed Apr 02, 2014
Well, I usually pride myself off doing things on my own but honestly now I am at a loss on exactly how National Seals/Coats of Arms are.
I get the idea but I am not very good at making them flow together. Parhe is an island archipelago that also is, at least partly, formerly a German colony, so if that could subtly be shown somehow if you can imagine a way.
Overall I'd like it to be more circular as East Asian emblems, though not exact. I would generally like the colors of my flag on it, Eggshell (#F0EAD6), Onyx(porrastettuja tai musta), Oxford Blue(#002147), Tangerine Yellow(#FFCC00), Venetian Red(#C80815), and have it limited to those if possible but it doesn't have to be all of them. National symbols include stuff like the tomoe, taeguk (three or two color), cogwheel (like in the coats for Italy or Botswana), or logarithmic spiral.
The national flowers are the Sunflower and Cherry Blossoms, while some national animals include the dugong, leatherback sea turtle, and moon bear.

Honestly my greatest issue here is creativity, finding how to put these things together. In truth I don't mind whether it is very simplistic or complicated and it in no way has to hold all these things. For reference I really like the coats of Bhutan, Kyrgyzstan, Mongolia, or Kazakhstan.

Perhaps this?

Thank you.

[Imagey Nation]

Postby United Regions of Verona » Sat Apr 05, 2014
Please note if I cannot get a flag, but oh well:
Could I get a Spanish red flag, with a golden bear in the middle, with its mouth open like it was ready to pounce, with a golden pine tree on its right and left?
Thank you.
united_regions_of_verona__213763.png

Thank you.

[Imagey Nation]

Postby Nordic Hyperborea » Sun Apr 06, 2014
Would you be able to do a high-res version of my flag?
Burgandy top and bottom bars
White diamond with black interior trim
Iniside - Gear cog with a roman "V" inside it
Cheers
nordic_hyperborea__289174.png

Thank you.

[Imagey Nation]

Motto changed, not included.
Symbol from flag between falcon head symbol.
Colours from flag.
(Image)
Thank you.

I'm sorry, but I re-made my request, could you look at it again? :/
viewtopic.php?f=23&t=13567&start=8100#p19836552

Request recorded when first seen. Is not revisited, so edit not seen.
Post change to request to thread as new message with reference original request. Then will be seen and recorded.
Thank you.

[Massasoit]

Hi Imagey!

I was wondering if you could please make an emblem and a digitalized flag for my real micronation called the Republic of Walnussia based off this description:

The flag is navy blue and has six gold five-pointed stars in the shape of a pentagon and below says, "WALNUSSIAN REPUBLIC" in gold and all-caps.

The escutcheon of the coat of arms has the same design of the flag without the text. The supporters are a penguin on the left and a mermaid on the right. The ribbon says "WALNUSSIAN REPUBLIC" as it does on the flag.

The shield shape with ribbon is this:
http://www.clker.com/cliparts/z/H/T/W/Y/C/shield-ribbon.svg

Hope this helps!

Cancel my request please.

[Parhe]

OMG I love it Imagery. Like I so so love it. So as in very not as in okay only. Definitely worth all the time. If you ever need something just ask me.

[Serrian]

Reposting because I'm not sure if you saw it:

I would like to request a logo:

A blue shield with Serrian's national seal (the middle part of my flag) on it and two swords crossed behind the shield. A beige banner below the shield should say "External Operations Force".

Thanks!

[Pimps Inc]

Reposting because I'm not sure if you saw it:

I would like to request a logo:

A blue shield with Serrian's national seal (the middle part of my flag) on it and two swords crossed behind the shield. A beige banner below the shield should say "External Operations Force".

Thanks!

He probably did but this takes time.

[Serrian]

Reposting because I'm not sure if you saw it:

I would like to request a logo:

A blue shield with Serrian's national seal (the middle part of my flag) on it and two swords crossed behind the shield. A beige banner below the shield should say "External Operations Force".

Thanks!

He probably did but this takes time.

Well, in any case, hope he didn't notice because I've made changes... :/

Oh well, either way I'm sure it'll look great!

[Davao and Mati]

Sorry again i have a new additional request can you make an Army Flag based on this

this

and this

thanks

[Pimps Inc]

He probably did but this takes time.

Well, in any case, hope he didn't notice because I've made changes... :/

Oh well, either way I'm sure it'll look great!

[Val-Verde]

Hey Imagey,

I'm after making the emblem which is featured here:

So could you please take this emblem:

And add an extra star.

Could you then please take that emblem and use it to make a coa similar to the one featured on here (With the flags behind it):

And for the flag could you take this flag:

Change it into a vertical tricolour of red, white and green. Change the emblem to the one created above (without flags) and place it in the center of the white.

Presidents flag: same as above but with a large yellow star in each corner.

Thank you!

[Garya]

Postby Garya » Sun Mar 23, 2014
Hi, I would like to add an insignia for the National Armed Police.
It would be a shield in the flag design in front of a gold Roman gladius point down. This is in front of two gold crossed flintlock pistols.

This is all inside a gold oak wreath. Thank you in advance.
garya__710522.gif

Thank you.

)Thank you Imagey, excellent work!

[Illhos]

What about mine?

[Computerised Equality]

What about mine?

Imagey has a LOT of requests. He needs 4-6 months, dependent on how many people asked, to complete them. There's nothing to do but be patient, as long as you haven't Ceased To Exist since your request was made.

[Divergia]

What about mine?

He's done yours already

[The Canada]

Hello there.

Can you draw a very thin line on the middle of this escutcheon and paint the topper stripe with this shade of blue and this [http://upload.wikimedia.org/wikipedia/commons/thumb/7/7d/Flag_of_Regina.svg/1024px-Flag_of_Regina.svg.png]that shade of yellow?[/url] And if possible, please put a white maple leaf on the middle of the shield. Thanks in advance.

[Val-Verde]

Hey Imagey,

I'm after making the emblem which is featured here:

(Image)

So could you please take this emblem:

(Image)

And add an extra star.

Could you then please take that emblem and use it to make a coa similar to the one featured on here (With the flags behind it):

(Image)

And for the flag could you take this flag:

(Image)

Change it into a vertical tricolour of red, white and green. Change the emblem to the one created above (without flags) and place it in the center of the white.

Presidents flag: same as above but with a large yellow star in each corner.

Thank you!

Just realised I made a request a couple of months back, please take this as the edit

[Parhe]

By the way, regarding the one you made me earlier. I was hoping if I could have the original resolution of it? Well, I assumed it isn't the regular resolution since parts of it looks to be scaled down.