If you want a seal or logo

[Imagey Nation]

Hi everyone i would like to have two symmetric golden dollar signs , and a silver statue of a man in the middle with a white background .

Assumed "white background" referred to seal, not man.

Thank you.

Yeah you were right mostly but do you have a man that looks a bit more greedy , the greedier the better . And i'd really like if the dollars could be slimmer . Thanks

Please provide example of what you mean by greedy look.
Thank you.

[Windica]

Hello there Imagey,

I would just like to ask how my request is doing, and I would like to make (another) small amendment.

Please make the crown in the center more flashy, just add some shine to it. Or like the crown in Garhza's seal. Thanks.

[Imagey Nation]

Two crossed test tubes boiling over with green clouds forming into a DNA strand above the norns, ettins, grendels and shee shown in spoilers below themselves below which is a cup of tea which below itself has the words "
"I say, old chap, I'm on fire."
"Goodness gracious, I expect that hurts. I'll design a device to pump water from the eastern ocean up to here. You get the kettle on." "Splendid. Sugar, Milk?" writen in a mostly unreadable old-fashond fount. Steampunk gearworkish backround please if you have time.

Some Norns. Just use the brown one with non-curled hair on it's head.

The Ettins. Just get rid of the pink

The Grendel. Use any one of the creatures you like from this phicture

The Shee. Perfect

Thanking you in advance... And apolagiseing for the huge workload...

Note this is same as Postby The shee of Albia » Wed Mar 31, 2010 3:13 pm.
Assume you have changed only Nation name, therefore no need to post again.
Thank you.

[Imagey Nation]

Hello there Imagey,
I would just like to ask how my request is doing, and I would like to make (another) small amendment.
Please make the crown in the center more flashy, just add some shine to it. Or like the crown in Garhza's seal. Thanks.

There are only 24 requests prior to yours at this time. We are working as we are able. There is also RL.
We have added this change to your request. Thank you for posting the change where we would see it.
Thank you.

[Imagey Nation]

Unfilled requests we have recorded and are working on:
note - indicates need for input from the nation who made request. We cannot complete until you advise.

Little Italy-Pornolia - link to example at ms site that requires to register before viewing. Need other link.
Tyraus - waiting for explication of " if the 'justice lady' looked similar to the minute man" for revision.
Tkdkidsx2 - waiting for explanation of "...in an arc in which the beginning of the word and the end of the word are at the topmost of the word "Dreumian Resource Network".

*****
Conspiracies Revealed - Need explication
Altamania (2) - Question of name spelling
Quattrablegia
Earth s Moon
Beacal
Denecaep
Abanhfleft
The Hyrhu-Dyii (2) - need sample of monster
Kalasparata
Undeadzombiee
St Timothy Isles (2)
Razorl
New Frankia State
Kalakda
Suckeryou
Boico
Herminia
Holy Imperial States
Windica
New Amerik
Ishema (2)
Castleclose
shee of Albia
Sea Shore
Terekstan
Greater Rhodes
Itailian Maifias
Blob-land
Ishema
Silver Beach
East Klent
Assassinistan
Emothica
Zeppy - rev
Jaloria

Just recorded:
Molkh
Frenca - re-entry awaiting clarification
Galsen - rev awaiting example of greedy look

Total is 45

Every request is recorded when we first see it.
Do not edit the original post, we will not revisit it until posting the finished work.
Do not post again your request unless you are changing some specification or adding new material, as Windica just did.
It is not necessary to bump the thread. There is enough activity to keep it current.
Please correct your spelling and language when you post. We must translate what you write before understanding your request.
The more precisely you describe what you want and the examples to which you post links, the easier it is to create what you want, which means earlier delivery.

Note that these images are created in RL time and are all custom creations. This requires real time.

Postby Solyhniya » Thu Mar 04, 2010 1:00 pm
@Imagey Nation: if you'd like, you could put something in your intro post about Slavic and Cyrillic translations, telling people to contact me for them.
Address is http://www.nationstates.net/solyhniya

Thank you.

[O Boyce]

I was wondering if you could make a seal that has two planets, one larger than the other with a joined atmosphere. Several stars around it. With the phrase Tenn' oio cenelya alassë above the phrase Riamh Nar Dhruid O Spairn Ian. At the very bottom saying in bold, Pokosian Official Communique.
I know alot, but if it could be done, thanks!

Thank you.

Thank you soo much, you are very good!

[Quattrablegia]

I know you guys are working on mine. I just did get my response from the Latin thread as to how to translate my national motto. Could you please replace "Pace" with "Pax Primogenita Omnium"?

Thanks so much for the hard work you guys do. I can't wait until I can get my own internet access so I can lend the graphic threads a hand.

Peace

[Frenca]

Imagey Nation,
Weeks back I posted a request but you have never replied.

Here is correspondence

Postby Frenca » Wed Mar 10, 2010 8:05 am
Can you make a seal for Frenca? I basically want my flag made into a circular seal but instead put Glorious exactly like this on the top, and Frenca exactly like this on the bottom.
frenca__187737.png

Image removed from Photobucket Sat Mar 13, 2010 = Otkyas_at_Kelmo/Frencaseal.png

Postby Frenca » Sat Mar 13, 2010 6:04 pm
Nov, can you reply to this?
Can you make a seal for Frenca? I basically want my flag made into a circular seal but instead put Glorious exactly like this on the top, and Frenca exactly like this on the bottom, and put two bronze colored jaguar silhouttes on the blue and green, their front paws touching to form an arch.
I know I have posted this, but I think I was forgotten.

Postby Novograd IV » Sat Mar 13, 2010 6:09 pm
Frenca wrote:Nov, can you reply to this?
Can you make a seal for Frenca? I basically want my flag made into a circular seal but instead put Glorious exactly like this on the top, and Frenca exactly like this on the bottom, and put two bronze colored jaguar silhouttes on the blue and green, their front paws touching to form an arch.
I know I have posted this, but I think I was forgotten.
tbh, i'm just taking up the small projects to give imagey a little less to look at. i'll see what i can do, but GIMP only goes so far
i SHOULD be able to do it, dimensions please?
i can take dimensions in CM, MM, IN, FT and just about any measurement, such is the magic of the image maipulation programs

Postby Frenca » Sat Mar 13, 2010 6:16 pm
Novograd IV wrote:
Frenca wrote:Nov, can you reply to this?
Can you make a seal for Frenca? I basically want my flag made into a circular seal but instead put Glorious exactly like this on the top, and Frenca exactly like this on the bottom, and put two bronze colored jaguar silhouttes on the blue and green, their front paws touching to form an arch.
I know I have posted this, but I think I was forgotten.

tbh, i'm just taking up the small projects to give imagey a little less to look at. i'll see what i can do, but GIMP only goes so far
i SHOULD be able to do it, dimensions please?
i can take dimensions in CM, MM, IN, FT and just about any measurement, such is the magic of the image maipulation programs

Actually, I want a circle, but make it 8 inches by 8 inches, 4 by 4 inches, and 1 foot by 1 foot. Edit: Add a thick strip on the outer circle, and write Liberte, Unetee, and Jousdice in it. EDIT: Make it exactly how I wrote it, and Uneete is spellled Unetee.

Postby Novograd IV » Sat Mar 13, 2010 6:23 pm
i know you want a circle
but GIMP = quadrilateral boundaries.
so with those i can work a circle into it, with transparrent backgrounds to keep it as a circle image for all backings and skins
i'll go by your measurements, but the resizing might end a little dodgey for some of them
just realised you were referring to 3 circles in 1 design, i assume on top of each other.
Last edited by Novograd IV on Sat Mar 13, 2010 6:25 pm, edited 2 times in total.

Postby Frenca » Sat Mar 13, 2010 6:25 pm
Novograd IV wrote:i know you want a circle
but GIMP = quadrilateral boundaries.
so with those i can work a circle into it, with transparrent backgrounds to keep it as a circle image for all backings and skins
i'll go by your measurements, but the resizing might end a little dodgey for some of them
Yeah, by that I meant put the circle inside a square in the sizes 4 by 4 and 8 by 8 inches, and 1 by 1 foot.
Last edited by Frenca on Sat Mar 13, 2010 6:23 pm, edited 2 times in total.

Postby Frenca » Sat Mar 13, 2010 6:26 pm
Novograd IV wrote:i know you want a circle
but GIMP = quadrilateral boundaries.
so with those i can work a circle into it, with transparrent backgrounds to keep it as a circle image for all backings and skins
i'll go by your measurements, but the resizing might end a little dodgey for some of them
just realised you were referring to 3 circles in 1 design, i assume on top of each other.
Yeah, I meant 1 design in 3 different sizes.

Postby Novograd IV » Mon Mar 15, 2010 2:44 am
Frenca wrote:
Novograd IV wrote:i know you want a circle
but GIMP = quadrilateral boundaries.
so with those i can work a circle into it, with transparrent backgrounds to keep it as a circle image for all backings and skins
i'll go by your measurements, but the resizing might end a little dodgey for some of them
just realised you were referring to 3 circles in 1 design, i assume on top of each other.
Yeah, I meant 1 design in 3 different sizes.
circles are nigh on impossible to do. give me some time please...

Postby Imagey Nation » Tue Mar 16, 2010 3:54 pm
Frenca wrote:
Novograd IV wrote:i know you want a circle
but GIMP = quadrilateral boundaries.
so with those i can work a circle into it, with transparent backgrounds to keep it as a circle image for all backings and skins
i'll go by your measurements, but the resizing might end a little dodgey for some of them
Yeah, by that I meant put the circle inside a square in the sizes 4 by 4 and 8 by 8 inches, and 1 by 1 foot.
"Foot" = 12 inches means ... ?

Postby Frenca » Sat Mar 20, 2010 7:25 am
Imagey Nation wrote:
Frenca wrote:
Novograd IV wrote:i know you want a circle
but GIMP = quadrilateral boundaries.
so with those i can work a circle into it, with transparent backgrounds to keep it as a circle image for all backings and skins
i'll go by your measurements, but the resizing might end a little dodgey for some of them
Yeah, by that I meant put the circle inside a square in the sizes 4 by 4 and 8 by 8 inches, and 1 by 1 foot.
"Foot" = 12 inches means ... ?
Thank you.
Yeah, a 12 by 12 inch square.

Postby Frenca » Wed Mar 24, 2010 4:51 pm
Hello?

Note that 3 days after posting your request, you asked Novograd IV to fulfill it and changed your request. You changed your request twice more, while answering queries from Novograd IV. Your last response was to our query about measurement. Apparently producing three images of such large sizes was too much for Novograd IV.
We have replied, but you asked someone else to make the design.

We had, however, already made the design you originally requested. We have not posted that, since you changed your request specifications when you asked Novograd IV to fulfill it.

Please post again exactly what you would like for an image not larger than 900 x 900 pixels, and we will attempt to provide it or give good reason why we cannot.

Thank you.

Okay, I want my flag put in a seal, and put Glorious Frenca on top.
Also, make 2 olive trees near the phoenix.
And I want it to be 400 by 400, 200 by 200, and 100 by 100.

[Maecduff]

Hi I would like a Communique with the Coat of arms of my flag in the middle and The Community of Meacduff written in Gaelic, Enlgish, French and Swedish and could you put my leaders name: Ronald Macduff. Thankyou, please add anything you feel necessary.

Thankyou very much and could I have it ASAP please.

[Suckeryou]

Still waiting on mine.

And it was a simple one, too.

[Greater Rhodes]

Still waiting on mine.

And it was a simple one, too.

Did you not see the list? Stop complaining and maybe try to scroll up a few posts, unless that's too hard for you.

[Falasia]

hey im sorry for this, but if you have time would yous be able to make m one of them 'Internet Newspaper' tool bars so i can post it in threads,
if you don't know what im talking about they have like 'Search your topic' and 'Latest News' and like 'Home' and 'Sports on it and stuff like that, it also has the logo of the news company.

I would appreciate it if someone could create me one,

Thankyou.

[The Marxist Commune]

Can I have one with a hammer and sickle crossed and a gun similar to the one on my actual nations flag, Nort Eurasia, placed between the hammer and sickle and 4 pieces of a cogwheel surrounding the items? And if not the cogwheels, then just put "Workers of the World, Unite"

[Imagey Nation]

hey im sorry for this, but if you have time would yous be able to make m one of them 'Internet Newspaper' tool bars so i can post it in threads,
if you don't know what im talking about they have like 'Search your topic' and 'Latest News' and like 'Home' and 'Sports on it and stuff like that, it also has the logo of the news company.
I would appreciate it if someone could create me one,
Thankyou.

What is name of the news company or of the newspaper?
What colors do you prefer?
Please advise.
Thank you.

[Falasia]

hey im sorry for this, but if you have time would yous be able to make m one of them 'Internet Newspaper' tool bars so i can post it in threads,
if you don't know what im talking about they have like 'Search your topic' and 'Latest News' and like 'Home' and 'Sports on it and stuff like that, it also has the logo of the news companyI.
I would appreciate it if someone could create me one,
Thankyou.

What is name of the news company or of the newspaper?
What colors do you prefer?
Please advise.
Thank you.

The name is "Carmel Times" and i dont prefer any colours realy, i wouldnt mind blue's greens or whites, whatever you think looks good,

Thanks

[The Hobitan Antilles]

Can you make me a Coat of Arms using this shape of shield with a diagnol line with the gold on my flag and could you put the two stars on my flag on the upper part of the shield. Then could you put it on a wreath similar to this one. Then could you put a crown on the top?

[Agaralia]

Dear Imagey Nation,

We in the Democratic Socialist Alliance have in our charter listed a badge of honor that can be given. We would like a honorful badge that supports Democratic Socialism. You will be payed 20,000$ for doing this and if you add on 3 free edits I will add 1,000$ and pay 15,000$ up front. Please telegram me the logo when you have made it, thank you. Disputes will be setled by a court on a forum.

Thank you!

[Imagey Nation]

[OOC]
I created a coat-of-arms for my nation using Paint and http://heraldicclipart.com . Here is what I created--I'm hoping you might be able to clean it up:

Could the "Quattrablegia" and "PACE" banners curve, giving the c-o-a a more circular shape, perhaps with the Quattrablegia banner peeking just behind the seagull's head?
References for the smaller flags (clockwise from upper left):
Polyamory: http://images.google.com/imgres?imgurl= ... s%3Disch:1
Transgender: http://en.wikipedia.org/wiki/File:Trans ... e_flag.svg (Yup, I know I screwed it up the first time)
Bisexual: http://en.wikipedia.org/wiki/File:Bi_flag.svg
Lesbian: Pink Greek lowercase letter lambda on black--couldn't find a good image but it's simple enough
Leather: http://images.google.com/imgres?imgurl= ... s%3Disch:1
Rainbow: http://images.google.com/imgres?imgurl= ... s%3Disch:1
Bear: http://images.google.com/imgres?imgurl= ... s%3Disch:1
(Gay: Purple rhino on white--again, couldn't find a good one)
Thanks again for this great service you provide us.
Peace
Whittier
[/OOC]

Thank you.

[Imagey Nation]

Could someone make me a Letter Header and Footer.
"Transmission from UMI(Uranium Mining Industry), Board of Directors, The Moon:" (UMI in blue.) and "End of Transmission.."
Make it look professional if you can
Good luck and thanks in Advance!

Header

and footer

Thank you.

[Imagey Nation]

When you get a chance, could you size this down, and place it over this. On the bottom of the shield, underneath the logo, could you have the words:
Offizielle Mitteilung der ruhigsten Demokratie Beacal
with the words:
Im Namen des großen Führer Herzog
written in slightly smaller print underneath the first lettering, closer to the edge of the shield.
Thanks!

Thank you.

[Imagey Nation]

I would like a circular logo for WASO, the World Anti-Slavery Organization.
I would like it to have an indigo or violet background, with a border of stars around the edges, and in the middle some sort of symbol like a broken chain or broken shackles. Somewhere on the logo I would like it to say "WASO."

Thank you.

[Imagey Nation]

I would like a company logo.
First, a red star with a yellow border in the center, with two black lines to the left and right, one for each side.
Next, for the text, they should be below the design. It's three languages, and I would like them arranged as posted:
English: Central Transportation Design Bureau
Russian: Центральное Бюро Проекта Транспортировки
Tagalog: Byuro Sentral ng Pagawaan ng Sasakyan
The font should be Arial, if that's okay.

Font is Arial Black.

Thank you.

[Imagey Nation]

I want this please:
Um reply in that thread please

You know what, forget about this (unless your half done of something)
Can I please get a passport? Two vertical stripes, one green, one maron. Iwant the divid to be directly in the middle please.
Then I want this please horizontally
The Democtric of Kalasparata
Kalasparatan Passport (larger font for Kalasparata Passport) [I want this one writen in english please]
(flag)
The Democtric of Kalasparata
Kalasparata Passport (larger font for Kalasparata Passport) [I want this one writen in greek please]{Can I please get the acsent on the bolded leter Kalasparata

Thank you.

[ILYLOL]

I would like my flag nut saying "Live, Love, Laugh" in white and in a circular shape plz. Bordered with white as well.
(put live love laugh at top)

THX!

[Imagey Nation]

May I please have a logo for a running tournament. Can it be a circle, with a red border, and black inside, with a white outline of a runner in the middle. And near the bottom it says: Track Championships.
Thank you.

Thank you.