NationStates

Posted: **Wed Apr 07, 2010 4:28 pm**

Sailsia wrote:

Thank you so much, but I was wondering if you could change a few things:
1: could you change the font style to arial
2: could you write "the Federal Republic of" and then at the bottom write Sailsia.
3: Could you make the background white?
4: Could you clean up the outline? And make the outline only yellow?
sorry to pretty much re-submit a request, but well, I am. Your work, as always, is great, but this seal ust isn't my nation.
-Thanks

Thank you.

Posted: **Wed Apr 07, 2010 4:37 pm**

Can u make a flag.It is to be in a circle with a dragon in the middle. Inside the circle are to be the words Quisnam umquam said ut calamus eram vires quam mucro nunquam auditus of automatic ornamentum
.Then around the border of the cirlce on the inside there are to be eight stars.

Posted: **Wed Apr 07, 2010 7:34 pm**

I do need something, and take as much time as you need.

World, but it has those lines over it, and in black and white.
Blue olive branches wrapped on the sides.
Big Blue Letters, "U.N.K.C.A", for United Nations Kaiju Control Agency.

I needs it for a guide to Daikaiju

.

Posted: **Wed Apr 07, 2010 9:27 pm**

Imagey Nation wrote:
The New Saltee Islands wrote:
Imagey Nation wrote:
The New Saltee Islands wrote:
Imagey Nation wrote:
The New Saltee Islands wrote:O! Great Imagey, I am in need of your service once more! Can I get a coat of arms made? I would like it to look like this shield and this crown on top. On the Shield I would like for a blue line to go diagonal from the bottom of the left to the top of the right. In the upper part I would like for a lion, like the lion on Spain's coat of arms but flipped the other way and a different color. Thank you.

What different color of lion?
Also, do you want these arms to replace those requested earlier on communiqué?
Please advise.
Thank you.

A gold lion please and please put it on the communiqué. Thank you Master Of Images!

With new arms and smaller as previously requested.

Thank you.

Wonderful Thank you!!!!!!
Just one tiny thing i forgot to mention. Can you change where it says St. Christopher to Port Williamsburg? Thank you! Sorry if I have been a picky pest.

Thank you.

Thank you Imagey!

Posted: **Thu Apr 08, 2010 1:12 pm**

Hello Imagey. I have a new communique request. You can cancel my last order, but if you have already begun working on it, I would like for you to finish please.

Can you take this seal, remove the red background, and put "The Communist Federation of Ishema" under it. Please make the writing curl around the bottom of the seal and maybe add some sort of design around it.

I would like the new communique to be commnist styled, and have the new seal as the main symbol. Have my nation's full title, The Communist Federation of Ishema, on there somewhere. My last request is to somehow integrate my capital city, Ishemana, and the Department of Diplomacy.

Thank you very much. Take all the time you need, no rush.

Posted: **Fri Apr 09, 2010 10:26 am**

I was wondering if you could make me a seal.

I would want to take this

and take off the Steiner part, and put in "The Kingdom of Silver Beach"

thank you if you can, i am in no hurry

Posted: **Fri Apr 09, 2010 5:34 pm**

I know you are busy, so I don't want to pester, and I did see my name on the list, just wondering how close to being done you are?

Posted: **Fri Apr 09, 2010 5:48 pm**

Imagey Nation,

Weeks back I posted a request but you have never replied.

Posted: **Sat Apr 10, 2010 9:28 am**

Frenca wrote:Imagey Nation,

Weeks back I posted a request but you have never replied.

If you've seen his waiting line, you'll know it is very long.

Posted: **Sat Apr 10, 2010 12:13 pm**

Denecaep wrote:
Frenca wrote:Imagey Nation,

Weeks back I posted a request but you have never replied.

If you've seen his waiting line, you'll know it is very long.

I am obliged to scream. SOME PEOPLE GOT THEIR REQUESTS AND THEY POSTED AFTER ME!

Posted: **Sat Apr 10, 2010 1:16 pm**

Frenca wrote:
Denecaep wrote:
Frenca wrote:Imagey Nation,

Weeks back I posted a request but you have never replied.

If you've seen his waiting line, you'll know it is very long.

I am obliged to scream. SOME PEOPLE GOT THEIR REQUESTS AND THEY POSTED AFTER ME!

You are obliged to wait like everyone else. Have patience, young grasshopper.

Posted: **Sat Apr 10, 2010 1:21 pm**

Frenca wrote:
Denecaep wrote:
Frenca wrote:Imagey Nation,

Weeks back I posted a request but you have never replied.

If you've seen his waiting line, you'll know it is very long.

I am obliged to scream. SOME PEOPLE GOT THEIR REQUESTS AND THEY POSTED AFTER ME!

you can be quiet.
screaming = pushed back in the queue

Posted: **Sun Apr 11, 2010 5:33 am**

I would like a communique logo, that includes the tiger in my flag on a red circle outlined in black, please, saying from the Department of State & Forgien Afairs arched on the top, and The Federal Republic of East Klent, arched on the bottom. Thanks In advance!

Posted: **Sun Apr 11, 2010 6:34 am**

I would like a Che Guevara T-shirt, except instead of a face, I want a picture of cheese. The motto should be "Viva la Revolucion" or if anyone comes up with a better cheese-related slogan they can put it in.
I know it's a weird request, but cheese is the symbol of political dissent in my nation! :palm:

Edit: GOT IT! "Cheesa La Revolucion!"

Posted: **Sun Apr 11, 2010 2:35 pm**

Imagey Nation wrote:
Galsen wrote:Hi everyone i would like to have two symmetric golden dollar signs , and a silver statue of a man in the middle with a white background .

Assumed "white background" referred to seal, not man.

Thank you.

Yeah you were right mostly but do you have a man that looks a bit more greedy , the greedier the better . And i'd really like if the dollars could be slimmer . Thanks :clap:

Posted: **Sun Apr 11, 2010 2:58 pm**

I would like a seal for my country.

1. In the middle there is a raven purching on a bunch of roses and olive brunches while holding a sword in it's mouth.

2. The logo of Emothica "I'm an emo kid and this what I've have to say." below that in some different langeage (you can pick).

3. The back is two different colors (black and purple.)

4. it should be in a crest shape.

thank you.

Posted: **Mon Apr 12, 2010 11:09 am**

I am sorry to disturb you but:

Can you edit it please? I want it to say "The Federal Republic of Zeppy" on top and "Liberty, Peace, Justice!" on the bottom large enough to almost hit the stars.
Thank you.

Posted: **Mon Apr 12, 2010 1:47 pm**

Two crossed test tubes boiling over with green clouds forming into a DNA strand above the norns, ettins, grendels and shee shown in spoilers below themselves below which is a cup of tea which below itself has the words "
"I say, old chap, I'm on fire."
"Goodness gracious, I expect that hurts. I'll design a device to pump water from the eastern ocean up to here. You get the kettle on." "Splendid. Sugar, Milk?" writen in a mostly unreadable old-fashond fount. Steampunk gearworkish backround please if you have time.

Thanking you in advance... And apolagiseing for the huge workload...

Posted: **Mon Apr 12, 2010 1:55 pm**

I would please like a seal for the Jalorian air force. I'd like a 2d fighter jet in the center of the seal, and on the top I would it to say "Jalorian Air Force". thanks for this awesome stuff you do.

Posted: **Mon Apr 12, 2010 2:47 pm**

Garhza wrote:I would like to request a laural around the center of my flag with a crown in the center of it. I would also like the same laural/crown piece on a shield. The laural will be placed behind the shield with the crown at the top. The shield is to have three stripes going diagonal from left to right in the following color pattern - white - red - white. In addition, could you also make the following words go diagonal in each of the stripes. Left most stripe: Pride; Center stripe: Honor, and the far right stripe: Duty. If possible could the words be in the font style vivandi? I thank you in advance for your consideration of my request. - Garhza
Crown - http://www.istockphoto.com/file_thumbview_approve/4619881/2/istockphoto_4619881-vector-crown-set.jpg - bottom left one.
Laural - http://upload.wikimedia.org/wikipedia/commons/thumb/c/c3/Laurel_wreath.svg/375px-Laurel_wreath.svg.png
Shield - http://www.iheartvector.com/wp-content/vector/shield-flourish-vector-th.png

Could not find Vivandi font. Assume you meant Vivaldi. Also, did not specify field for shield with stripes, so assumed grey from flag.

Thank you.

Posted: **Mon Apr 12, 2010 2:50 pm**

O Boyce wrote:I was wondering if you could make a seal that has two planets, one larger than the other with a joined atmosphere. Several stars around it. With the phrase Tenn' oio cenelya alassë above the phrase Riamh Nar Dhruid O Spairn Ian. At the very bottom saying in bold, Pokosian Official Communique.
I know alot, but if it could be done, thanks!

Thank you.

Posted: **Mon Apr 12, 2010 2:52 pm**

North african empire wrote:
Imagey Nation wrote:Make your request here if you want a national or regional seal or a company logo.

A national seal usually includes your flag or elements from it, your national motto and your national animal, but not necessarily. It may also have symbols representing the qualities of your nation or its history, your state religion if you have one and political or economic ties of your nation.

A regional seal may include elements from the founder's flag but not necessarily. What is the nature and purpose of your region?

A company logo may be a symbol or a monogram exemplifying the nature of the company or its products or services. It may include a motto or slogan.

Please think about what you would want in a seal or logo before posting your request. Include links to examples and sources of symbols or other elements with your description. When you do the search for examples and elements and the more clearly you describe what you want, the easier it will be to fill your request and satisfy you sooner.

Thank you.

I would like a national seal with a picture of a Ak on one and a lion on the other and at the bottom of the seal our national motto "All hail President Phillips"

Thank you

Thank you.

Posted: **Mon Apr 12, 2010 2:55 pm**

Voltronica wrote:WOuld it be possible to create an alternate still image with the elements from the GIF graphic im currently using but with two eagle heads instead of one...

Individual images too small to make larger. Perhaps this

Thank you.

Posted: **Mon Apr 12, 2010 2:59 pm**

O, goody!

May I have a crest upheld by a death stalker? (A death stalker is a kind of scorpion)

Motto=

"Who says we need a national motto?"

Posted: **Mon Apr 12, 2010 7:40 pm**

Frenca wrote:Imagey Nation,
Weeks back I posted a request but you have never replied.

Here is correspondence

Postby Frenca » Wed Mar 10, 2010 8:05 am
Can you make a seal for Frenca? I basically want my flag made into a circular seal but instead put Glorious exactly like this on the top, and Frenca exactly like this on the bottom.
frenca__187737.png

Image removed from Photobucket Sat Mar 13, 2010 = Otkyas_at_Kelmo/Frencaseal.png

Postby Frenca » Sat Mar 13, 2010 6:04 pm
Nov, can you reply to this?
Can you make a seal for Frenca? I basically want my flag made into a circular seal but instead put Glorious exactly like this on the top, and Frenca exactly like this on the bottom, and put two bronze colored jaguar silhouttes on the blue and green, their front paws touching to form an arch.
I know I have posted this, but I think I was forgotten.

Postby Novograd IV » Sat Mar 13, 2010 6:09 pm
Frenca wrote:Nov, can you reply to this?
Can you make a seal for Frenca? I basically want my flag made into a circular seal but instead put Glorious exactly like this on the top, and Frenca exactly like this on the bottom, and put two bronze colored jaguar silhouttes on the blue and green, their front paws touching to form an arch.
I know I have posted this, but I think I was forgotten.
tbh, i'm just taking up the small projects to give imagey a little less to look at. i'll see what i can do, but GIMP only goes so far
i SHOULD be able to do it, dimensions please?
i can take dimensions in CM, MM, IN, FT and just about any measurement, such is the magic of the image maipulation programs

Postby Frenca » Sat Mar 13, 2010 6:16 pm
Novograd IV wrote:
Frenca wrote:Nov, can you reply to this?
Can you make a seal for Frenca? I basically want my flag made into a circular seal but instead put Glorious exactly like this on the top, and Frenca exactly like this on the bottom, and put two bronze colored jaguar silhouttes on the blue and green, their front paws touching to form an arch.
I know I have posted this, but I think I was forgotten.

tbh, i'm just taking up the small projects to give imagey a little less to look at. i'll see what i can do, but GIMP only goes so far
i SHOULD be able to do it, dimensions please?
i can take dimensions in CM, MM, IN, FT and just about any measurement, such is the magic of the image maipulation programs

Actually, I want a circle, but make it 8 inches by 8 inches, 4 by 4 inches, and 1 foot by 1 foot. Edit: Add a thick strip on the outer circle, and write Liberte, Unetee, and Jousdice in it. EDIT: Make it exactly how I wrote it, and Uneete is spellled Unetee.

Postby Novograd IV » Sat Mar 13, 2010 6:23 pm
i know you want a circle
but GIMP = quadrilateral boundaries.
so with those i can work a circle into it, with transparrent backgrounds to keep it as a circle image for all backings and skins
i'll go by your measurements, but the resizing might end a little dodgey for some of them
just realised you were referring to 3 circles in 1 design, i assume on top of each other.
Last edited by Novograd IV on Sat Mar 13, 2010 6:25 pm, edited 2 times in total.

Postby Frenca » Sat Mar 13, 2010 6:25 pm
Novograd IV wrote:i know you want a circle
but GIMP = quadrilateral boundaries.
so with those i can work a circle into it, with transparrent backgrounds to keep it as a circle image for all backings and skins
i'll go by your measurements, but the resizing might end a little dodgey for some of them
Yeah, by that I meant put the circle inside a square in the sizes 4 by 4 and 8 by 8 inches, and 1 by 1 foot.
Last edited by Frenca on Sat Mar 13, 2010 6:23 pm, edited 2 times in total.

Postby Frenca » Sat Mar 13, 2010 6:26 pm
Novograd IV wrote:i know you want a circle
but GIMP = quadrilateral boundaries.
so with those i can work a circle into it, with transparrent backgrounds to keep it as a circle image for all backings and skins
i'll go by your measurements, but the resizing might end a little dodgey for some of them
just realised you were referring to 3 circles in 1 design, i assume on top of each other.
Yeah, I meant 1 design in 3 different sizes.

Postby Novograd IV » Mon Mar 15, 2010 2:44 am
Frenca wrote:
Novograd IV wrote:i know you want a circle
but GIMP = quadrilateral boundaries.
so with those i can work a circle into it, with transparrent backgrounds to keep it as a circle image for all backings and skins
i'll go by your measurements, but the resizing might end a little dodgey for some of them
just realised you were referring to 3 circles in 1 design, i assume on top of each other.
Yeah, I meant 1 design in 3 different sizes.
circles are nigh on impossible to do. give me some time please...

Postby Imagey Nation » Tue Mar 16, 2010 3:54 pm
Frenca wrote:
Novograd IV wrote:i know you want a circle
but GIMP = quadrilateral boundaries.
so with those i can work a circle into it, with transparent backgrounds to keep it as a circle image for all backings and skins
i'll go by your measurements, but the resizing might end a little dodgey for some of them
Yeah, by that I meant put the circle inside a square in the sizes 4 by 4 and 8 by 8 inches, and 1 by 1 foot.
"Foot" = 12 inches means ... ?

Postby Frenca » Sat Mar 20, 2010 7:25 am
Imagey Nation wrote:
Frenca wrote:
Novograd IV wrote:i know you want a circle
but GIMP = quadrilateral boundaries.
so with those i can work a circle into it, with transparent backgrounds to keep it as a circle image for all backings and skins
i'll go by your measurements, but the resizing might end a little dodgey for some of them
Yeah, by that I meant put the circle inside a square in the sizes 4 by 4 and 8 by 8 inches, and 1 by 1 foot.
"Foot" = 12 inches means ... ?
Thank you.
Yeah, a 12 by 12 inch square.

Postby Frenca » Wed Mar 24, 2010 4:51 pm
Hello?

Note that 3 days after posting your request, you asked Novograd IV to fulfill it and changed your request. You changed your request twice more, while answering queries from Novograd IV. Your last response was to our query about measurement. Apparently producing three images of such large sizes was too much for Novograd IV.
We have replied, but you asked someone else to make the design.

We had, however, already made the design you originally requested. We have not posted that, since you changed your request specifications when you asked Novograd IV to fulfill it.

Please post again exactly what you would like for an image not larger than 900 x 900 pixels, and we will attempt to provide it or give good reason why we cannot.

Thank you.

NationStates

If you want a seal or logo