Galsen wrote:
Yeah you were right mostly but do you have a man that looks a bit more greedy , the greedier the better . And i'd really like if the dollars could be slimmer . Thanks
Please provide example of what you mean by greedy look.
Thank you.
Advertisement
by Imagey Nation » Mon Apr 12, 2010 7:45 pm
Galsen wrote:
Yeah you were right mostly but do you have a man that looks a bit more greedy , the greedier the better . And i'd really like if the dollars could be slimmer . Thanks
by Windica » Mon Apr 12, 2010 7:49 pm
by Imagey Nation » Mon Apr 12, 2010 7:55 pm
The shee race wrote:Two crossed test tubes boiling over with green clouds forming into a DNA strand above the norns, ettins, grendels and shee shown in spoilers below themselves below which is a cup of tea which below itself has the words "
"I say, old chap, I'm on fire."
"Goodness gracious, I expect that hurts. I'll design a device to pump water from the eastern ocean up to here. You get the kettle on." "Splendid. Sugar, Milk?" writen in a mostly unreadable old-fashond fount. Steampunk gearworkish backround please if you have time.
Some Norns. Just use the brown one with non-curled hair on it's head.
The Ettins. Just get rid of the pink
The Grendel. Use any one of the creatures you like from this phicture
The Shee. Perfect
Thanking you in advance... And apolagiseing for the huge workload...
by Imagey Nation » Mon Apr 12, 2010 8:15 pm
Windica wrote:Hello there Imagey,
I would just like to ask how my request is doing, and I would like to make (another) small amendment.
Please make the crown in the center more flashy, just add some shine to it. Or like the crown in Garhza's seal. Thanks.
by Imagey Nation » Mon Apr 12, 2010 8:18 pm
by O Boyce » Mon Apr 12, 2010 9:14 pm
Imagey Nation wrote:O Boyce wrote:I was wondering if you could make a seal that has two planets, one larger than the other with a joined atmosphere. Several stars around it. With the phrase Tenn' oio cenelya alassë above the phrase Riamh Nar Dhruid O Spairn Ian. At the very bottom saying in bold, Pokosian Official Communique.
I know alot, but if it could be done, thanks!
Thank you.
by Quattrablegia » Tue Apr 13, 2010 10:00 am
by Frenca » Tue Apr 13, 2010 10:08 am
Imagey Nation wrote:Frenca wrote:Imagey Nation,
Weeks back I posted a request but you have never replied.
Here is correspondencePostby Frenca » Wed Mar 10, 2010 8:05 am
Can you make a seal for Frenca? I basically want my flag made into a circular seal but instead put Glorious exactly like this on the top, and Frenca exactly like this on the bottom.
frenca__187737.png
Image removed from Photobucket Sat Mar 13, 2010 = Otkyas_at_Kelmo/Frencaseal.png
Postby Frenca » Sat Mar 13, 2010 6:04 pm
Nov, can you reply to this?
Can you make a seal for Frenca? I basically want my flag made into a circular seal but instead put Glorious exactly like this on the top, and Frenca exactly like this on the bottom, and put two bronze colored jaguar silhouttes on the blue and green, their front paws touching to form an arch.
I know I have posted this, but I think I was forgotten.
Postby Novograd IV » Sat Mar 13, 2010 6:09 pm
Frenca wrote:Nov, can you reply to this?
Can you make a seal for Frenca? I basically want my flag made into a circular seal but instead put Glorious exactly like this on the top, and Frenca exactly like this on the bottom, and put two bronze colored jaguar silhouttes on the blue and green, their front paws touching to form an arch.
I know I have posted this, but I think I was forgotten.
tbh, i'm just taking up the small projects to give imagey a little less to look at. i'll see what i can do, but GIMP only goes so far
i SHOULD be able to do it, dimensions please?
i can take dimensions in CM, MM, IN, FT and just about any measurement, such is the magic of the image maipulation programs
Postby Frenca » Sat Mar 13, 2010 6:16 pm
Novograd IV wrote:
Frenca wrote:Nov, can you reply to this?
Can you make a seal for Frenca? I basically want my flag made into a circular seal but instead put Glorious exactly like this on the top, and Frenca exactly like this on the bottom, and put two bronze colored jaguar silhouttes on the blue and green, their front paws touching to form an arch.
I know I have posted this, but I think I was forgotten.
tbh, i'm just taking up the small projects to give imagey a little less to look at. i'll see what i can do, but GIMP only goes so far
i SHOULD be able to do it, dimensions please?
i can take dimensions in CM, MM, IN, FT and just about any measurement, such is the magic of the image maipulation programs
Actually, I want a circle, but make it 8 inches by 8 inches, 4 by 4 inches, and 1 foot by 1 foot. Edit: Add a thick strip on the outer circle, and write Liberte, Unetee, and Jousdice in it. EDIT: Make it exactly how I wrote it, and Uneete is spellled Unetee.
Postby Novograd IV » Sat Mar 13, 2010 6:23 pm
i know you want a circle
but GIMP = quadrilateral boundaries.
so with those i can work a circle into it, with transparrent backgrounds to keep it as a circle image for all backings and skins
i'll go by your measurements, but the resizing might end a little dodgey for some of them
just realised you were referring to 3 circles in 1 design, i assume on top of each other.
Last edited by Novograd IV on Sat Mar 13, 2010 6:25 pm, edited 2 times in total.
Postby Frenca » Sat Mar 13, 2010 6:25 pm
Novograd IV wrote:i know you want a circle
but GIMP = quadrilateral boundaries.
so with those i can work a circle into it, with transparrent backgrounds to keep it as a circle image for all backings and skins
i'll go by your measurements, but the resizing might end a little dodgey for some of them
Yeah, by that I meant put the circle inside a square in the sizes 4 by 4 and 8 by 8 inches, and 1 by 1 foot.
Last edited by Frenca on Sat Mar 13, 2010 6:23 pm, edited 2 times in total.
Postby Frenca » Sat Mar 13, 2010 6:26 pm
Novograd IV wrote:i know you want a circle
but GIMP = quadrilateral boundaries.
so with those i can work a circle into it, with transparrent backgrounds to keep it as a circle image for all backings and skins
i'll go by your measurements, but the resizing might end a little dodgey for some of them
just realised you were referring to 3 circles in 1 design, i assume on top of each other.
Yeah, I meant 1 design in 3 different sizes.
Postby Novograd IV » Mon Mar 15, 2010 2:44 am
Frenca wrote:
Novograd IV wrote:i know you want a circle
but GIMP = quadrilateral boundaries.
so with those i can work a circle into it, with transparrent backgrounds to keep it as a circle image for all backings and skins
i'll go by your measurements, but the resizing might end a little dodgey for some of them
just realised you were referring to 3 circles in 1 design, i assume on top of each other.
Yeah, I meant 1 design in 3 different sizes.
circles are nigh on impossible to do. give me some time please...
Postby Imagey Nation » Tue Mar 16, 2010 3:54 pm
Frenca wrote:
Novograd IV wrote:i know you want a circle
but GIMP = quadrilateral boundaries.
so with those i can work a circle into it, with transparent backgrounds to keep it as a circle image for all backings and skins
i'll go by your measurements, but the resizing might end a little dodgey for some of them
Yeah, by that I meant put the circle inside a square in the sizes 4 by 4 and 8 by 8 inches, and 1 by 1 foot.
"Foot" = 12 inches means ... ?
Postby Frenca » Sat Mar 20, 2010 7:25 am
Imagey Nation wrote:
Frenca wrote:
Novograd IV wrote:i know you want a circle
but GIMP = quadrilateral boundaries.
so with those i can work a circle into it, with transparent backgrounds to keep it as a circle image for all backings and skins
i'll go by your measurements, but the resizing might end a little dodgey for some of them
Yeah, by that I meant put the circle inside a square in the sizes 4 by 4 and 8 by 8 inches, and 1 by 1 foot.
"Foot" = 12 inches means ... ?
Thank you.
Yeah, a 12 by 12 inch square.
Postby Frenca » Wed Mar 24, 2010 4:51 pm
Hello?
Note that 3 days after posting your request, you asked Novograd IV to fulfill it and changed your request. You changed your request twice more, while answering queries from Novograd IV. Your last response was to our query about measurement. Apparently producing three images of such large sizes was too much for Novograd IV.
We have replied, but you asked someone else to make the design.
We had, however, already made the design you originally requested. We have not posted that, since you changed your request specifications when you asked Novograd IV to fulfill it.
Please post again exactly what you would like for an image not larger than 900 x 900 pixels, and we will attempt to provide it or give good reason why we cannot.
Thank you.
by Maecduff » Wed Apr 14, 2010 3:35 am
by Greater Rhodes » Wed Apr 14, 2010 7:08 pm
by Falasia » Thu Apr 15, 2010 3:35 am
by The Marxist Commune » Thu Apr 15, 2010 8:45 am
by Imagey Nation » Thu Apr 15, 2010 1:03 pm
Falasia wrote:hey im sorry for this, but if you have time would yous be able to make m one of them 'Internet Newspaper' tool bars so i can post it in threads,
if you don't know what im talking about they have like 'Search your topic' and 'Latest News' and like 'Home' and 'Sports on it and stuff like that, it also has the logo of the news company.
I would appreciate it if someone could create me one,
Thankyou.
by Falasia » Thu Apr 15, 2010 3:09 pm
Imagey Nation wrote:Falasia wrote:hey im sorry for this, but if you have time would yous be able to make m one of them 'Internet Newspaper' tool bars so i can post it in threads,
if you don't know what im talking about they have like 'Search your topic' and 'Latest News' and like 'Home' and 'Sports on it and stuff like that, it also has the logo of the news companyI.
I would appreciate it if someone could create me one,
Thankyou.
What is name of the news company or of the newspaper?
What colors do you prefer?
Please advise.
Thank you.
by The Hobitan Antilles » Thu Apr 15, 2010 4:36 pm
by Agaralia » Fri Apr 16, 2010 5:26 pm
Tom Bishop wrote:There's no point as we are already being oppressed.
by Imagey Nation » Fri Apr 16, 2010 7:36 pm
Quattrablegia wrote:[OOC]
I created a coat-of-arms for my nation using Paint and http://heraldicclipart.com . Here is what I created--I'm hoping you might be able to clean it up:
Could the "Quattrablegia" and "PACE" banners curve, giving the c-o-a a more circular shape, perhaps with the Quattrablegia banner peeking just behind the seagull's head?
References for the smaller flags (clockwise from upper left):
Polyamory: http://images.google.com/imgres?imgurl= ... s%3Disch:1
Transgender: http://en.wikipedia.org/wiki/File:Trans ... e_flag.svg (Yup, I know I screwed it up the first time)
Bisexual: http://en.wikipedia.org/wiki/File:Bi_flag.svg
Lesbian: Pink Greek lowercase letter lambda on black--couldn't find a good image but it's simple enough
Leather: http://images.google.com/imgres?imgurl= ... s%3Disch:1
Rainbow: http://images.google.com/imgres?imgurl= ... s%3Disch:1
Bear: http://images.google.com/imgres?imgurl= ... s%3Disch:1
(Gay: Purple rhino on white--again, couldn't find a good one)
Thanks again for this great service you provide us.
Peace
Whittier
[/OOC]
by Imagey Nation » Fri Apr 16, 2010 7:40 pm
Earth s Moon wrote:Could someone make me a Letter Header and Footer.
"Transmission from UMI(Uranium Mining Industry), Board of Directors, The Moon:" (UMI in blue.) and "End of Transmission.."
Make it look professional if you can
Good luck and thanks in Advance!
by Imagey Nation » Fri Apr 16, 2010 7:42 pm
Beacal wrote:When you get a chance, could you size this down, and place it over this. On the bottom of the shield, underneath the logo, could you have the words:
Offizielle Mitteilung der ruhigsten Demokratie Beacal
with the words:
Im Namen des großen Führer Herzog
written in slightly smaller print underneath the first lettering, closer to the edge of the shield.
Thanks!
by Imagey Nation » Fri Apr 16, 2010 7:44 pm
Denecaep wrote:I would like a circular logo for WASO, the World Anti-Slavery Organization.
I would like it to have an indigo or violet background, with a border of stars around the edges, and in the middle some sort of symbol like a broken chain or broken shackles. Somewhere on the logo I would like it to say "WASO."
by Imagey Nation » Fri Apr 16, 2010 7:46 pm
Abanhfleft wrote:I would like a company logo.
First, a red star with a yellow border in the center, with two black lines to the left and right, one for each side.
Next, for the text, they should be below the design. It's three languages, and I would like them arranged as posted:
English: Central Transportation Design Bureau
Russian: Центральное Бюро Проекта Транспортировки
Tagalog: Byuro Sentral ng Pagawaan ng Sasakyan
The font should be Arial, if that's okay.
by Imagey Nation » Fri Apr 16, 2010 7:48 pm
Kalasparata wrote:
You know what, forget about this (unless your half done of something)
Can I please get a passport? Two vertical stripes, one green, one maron. Iwant the divid to be directly in the middle please.
Then I want this please horizontally
The Democtric of Kalasparata
Kalasparatan Passport (larger font for Kalasparata Passport) [I want this one writen in english please]
(flag)
The Democtric of Kalasparata
Kalasparata Passport (larger font for Kalasparata Passport) [I want this one writen in greek please]{Can I please get the acsent on the bolded leter Kalasparata
by ILYLOL » Fri Apr 16, 2010 7:50 pm
by Imagey Nation » Fri Apr 16, 2010 7:50 pm
Undeadzombiee wrote:May I please have a logo for a running tournament. Can it be a circle, with a red border, and black inside, with a white outline of a runner in the middle. And near the bottom it says: Track Championships.
Thank you.
Advertisement
Return to Factbooks and National Information
Users browsing this forum: Congo-Kinsasa, Laka Strolistandiler, Sorlyset
Advertisement