Flag Makers/Requests II

[Almonaster Nuevo]

Hey there, I've been thinking of updating the flag for this very nation, though I haven't been able to come up with any new design, I thought I'd lodge a request here. The most I can say is that I'm in search of a generic design. I look forward to what any of you might come up with.

Here's an idea...

[Mondbasis Achtzig]

Hi, dumb request here:

Can someone edit the Nazi flag with the off center white circle, replace the Nazi swastika with these moons?

Also do the Nazi part flag where the white circle is just perfectly aligned in the middle of the flag.

[Imperium of Rus]

Hi, dumb request here:

Can someone edit the Nazi flag with the off center white circle, replace the Nazi swastika with these moons?

(Image)

Also do the Nazi part flag where the white circle is just perfectly aligned in the middle of the flag.

Alright.

https://imgur.com/a/SF5iAtG

https://imgur.com/a/WlACrm6

[Communist Mars]

Hello,

I’d like a 2:3 flag with the background coloured #CC0000 (Soviet red). In the centre I would like a hammer & sickle. Inside the sickle, with the hammer overlapping, I would like the symbol of Mars, with the sickle seemingly holding it, to represent Communism’s grip on Mars. I would like to the Mars symbol’s pointy part to overlap the sickle. I would like the two smaller circles from here, representing the moons Phobos and Deimos, to be located horizontally on opposite sides of the central symbol. I would like #FFD700 (Soviet gold) to be used for the hammer and sickle, with a darker shade of gold surrounding the entirety of Mars symbol (which I want coloured #CC0000).

I’d like the flag in svg or png, thank you, and a flat image without any particular texture.

[Almonaster Nuevo]

Hello,

I’d like a 2:3 flag with the background coloured #CC0000 (Soviet red). In the centre I would like a hammer & sickle. Inside the sickle, with the hammer overlapping, I would like the symbol of Mars, with the sickle seemingly holding it, to represent Communism’s grip on Mars. I would like to the Mars symbol’s pointy part to overlap the sickle. I would like the two smaller circles from here, representing the moons Phobos and Deimos, to be located horizontally on opposite sides of the central symbol. I would like #FFD700 (Soviet gold) to be used for the hammer and sickle, with a darker shade of gold surrounding the entirety of Mars symbol (which I want coloured #CC0000).

I’d like the flag in svg or png, thank you, and a flat image without any particular texture.

[The Mexican Soviet Republic]

Can I have a flag with a simple yellow background with the logo of the Fourth International; hammer and sickle coloured red; the number four with a red outline and yellow inline like the four seen in the second spoiler below.

[Almonaster Nuevo]

Can I have a flag with a simple yellow background with the logo of the Fourth International; hammer and sickle coloured red; the number four with a red outline and yellow inline like the four seen in the second spoiler below.

(Image)

(Image)

[The Mexican Soviet Republic]

Can I have a flag with a simple yellow background with the logo of the Fourth International; hammer and sickle coloured red; the number four with a red outline and yellow inline like the four seen in the second spoiler below.

(Image)

(Image)

Thank you

[Imperial Rifta]

I have a rather complicated request. I want this with a black background:


Surrounded by a white laurel wreath, surrounded by a white circle. I want the circle surrounded by white stars, and the star surrounded by another white circle. If that too complicated I can rephrase it.

[Brusseldorf]

I have a rather complicated request

https://i.imgur.com/E4gCUgw.png

[Imperial Rifta]

I have a rather complicated request

https://i.imgur.com/E4gCUgw.png

NS says it not a proper image format, like a JPEG. Can you try something else?

[Brusseldorf]

https://i.imgur.com/E4gCUgw.png

NS says it not a proper image format, like a JPEG. Can you try something else?

Huh thats weird
https://i.imgur.com/R8ZzC5K.jpg
see if that works?

[Imperial Rifta]

NS says it not a proper image format, like a JPEG. Can you try something else?

Huh thats weird
https://i.imgur.com/R8ZzC5K.jpg
see if that works?

That’s not working either

[Almonaster Nuevo]

I have seen this before if the image size was too large. Naff error message is all.

[United Australasian Commonwealth]

can some make State Flags based on my National flag
https://www.nationstates.net/nation=uni ... id=1456525

the Flags must look like the National Flag and must have the same three flags in the middle

However for the Australasian state of the Union of South Africa , a different design must be put into place due to the flag being the same

the Gear Symbol must be replaced with the three Middle Flags

and for New Zealand use this and put the three middle flags in the white area like the national flag

for Cambodia use this

Replace the White Building with the three middle flags like in the national flag


For Australia use the current flag but turn the background orange

Finally for Los Angeles do something like this

but replace the Yugoslav flag with the National Flag

[New Horissnia]

Does anybody have suggestions for how I can improve my current flag? I'm honestly strapped for ideas. Personally I just think the layout is off, but I don't know why exactly.

[Almonaster Nuevo]

Does anybody have suggestions for how I can improve my current flag? I'm honestly strapped for ideas. Personally I just think the layout is off, but I don't know why exactly.

Pleae try the flag advice thread.

[Imperial Rifta]

I have seen this before if the image size was too large. Naff error message is all.

Will you try maybe?

[Almonaster Nuevo]

Try what? The problem is at your end.

Just scale the image down before trying to upload it.

[Alaska Hawaii and the Aleutes]

can some make State Flags based on my National flag
https://www.nationstates.net/nation=uni ... id=1456525

the Flags must look like the National Flag and must have the same three flags in the middle

(Image)

However for the Australasian state of the Union of South Africa , a different design must be put into place due to the flag being the same

(Image)

the Gear Symbol must be replaced with the three Middle Flags

and for New Zealand use this and put the three middle flags in the white area like the national flag

(Image)

for Cambodia use this

(Image)

Replace the White Building with the three middle flags like in the national flag


For Australia use the current flag but turn the background orange

(Image)

Finally for Los Angeles do something like this

(Image)

but replace the Yugoslav flag with the National Flag

I tried making one for South Africa, is this how you imagined it?

Edit: I also made your other flags, hope I made everything right

[United Australasian Commonwealth]

can some make State Flags based on my National flag
https://www.nationstates.net/nation=uni ... id=1456525

the Flags must look like the National Flag and must have the same three flags in the middle

(Image)

However for the Australasian state of the Union of South Africa , a different design must be put into place due to the flag being the same

(Image)

the Gear Symbol must be replaced with the three Middle Flags

and for New Zealand use this and put the three middle flags in the white area like the national flag

(Image)

for Cambodia use this

(Image)

Replace the White Building with the three middle flags like in the national flag


For Australia use the current flag but turn the background orange

(Image)

Finally for Los Angeles do something like this

(Image)

but replace the Yugoslav flag with the National Flag

I tried making one for South Africa, is this how you imagined it?

Edit: I also made your other flags, hope I made everything right

Thanks

[The Principality of Japan]

I would like someone to design a flag designed using the one with a canton.

In the canton is the flag of Japan with a yellow fringe outlining the canton. The field of the flag is blue with this image of Japan in it coloured in green.

[Almonaster Nuevo]

I would like someone to design a flag designed using the one with a canton.

In the canton is the flag of Japan with a yellow fringe outlining the canton. The field of the flag is blue with this image of Japan in it coloured in green.

(Image)

[The Principality of Japan]

I would like someone to design a flag designed using the one with a canton.

In the canton is the flag of Japan with a yellow fringe outlining the canton. The field of the flag is blue with this image of Japan in it coloured in green.

(Image)

Thank you man.

[Brusseldorf]

I have seen this before if the image size was too large. Naff error message is all.

Will you try maybe?

https://i.imgur.com/FanFjuO.png
Thats alright, I use picresize but any other online tool is easy and helpful
Sorry for making the first one really big but you know I love them pixels