M.A.C-Military Armaments Company Heavy Industries | Defense

[Anghele]

Standard,service length M.A.C-56.

http://i43.tinypic.com/2jfyfyf.jpg

Avaliable in standard or suppressed configuration.

Specifications:

M.A.C-56| Service

-Caliber: 5.56x45mm

-Magazine Capacity: 20 or 30 Rounds [100 Rounds Drums Available On Request]

-Rate Of Fire: 770 Rounds/Min

-Length: 998 / 772 mm (Stock Open / Folded)

Price : $2.000USD

Domestic Production Rights : $7.720.000.000USD

Thank you,

M.A.C Heavy Industries Defense Management.

[Anghele]

M.A.C Heavy Industries | Defense A.A.S-12

http://i40.tinypic.com/14nmfrd.jpg

Description:

The A.A.S is essentially based on the M.A.C-56 rifle, with modifications made to allow the use of higher powered shotgun ammunition. The shotgun uses a clean gas system, with the piston attached to the bolt carrier. The rotating bolt has been modified to have 3 massive lugs and an oversized,reinforced ejector, a setup more effective for rimmed shotgun rounds. The reinforced recoil spring is located around the gas piston rod, above the barrel, and the bolt carrier attached to the gas piston rod by means of a removable charging handle. The gas port has been modified and has only one mode. The barrel has a standard type compensator to ease control in fully-automatic firing.

Like the M.A.C-5X series,the A.A.S-12 has a stamped heat treated steel receiver which is highly resistant to the impact forces of .12Gauge ammunition.The receiver has two major assemblies, upper and lower receivers, which are connected by pushpins.

The barrel is pressed onto the upper receiver. All metal parts are coated with a super corrosion resistant Maritime Finish.

The trigger mechanism has a safety/fire selector switch on the left side of the receiver, with 4 settings: safe, semi-auto, 3 round burst and full-automatic. The Rear sights are drum-type peep-hole and the front sight is a standard blade type. The A.A.S-12 comes with standard Picatinny rails on the top and bottom of the furniture allowing the use of several tactical accessories and sights simultaneously. The polymer stock is of the telescopic type and is designed to ease the effect of recoil in automatic firing.

The A.A.S-12 magazines are made of polymer can be clamped together for ease of carry, using the magazine studs on the side of the magazine walls.Magazines are available in,12 and 15 round box magazines and 20 round drum magazines.

Specifications:

M.A.C | Defense A.A.S-12

-Type: Selective Fire Shotgun

-Action: Short Stroke Gas Psiton

-Calibre: 12 gauge.

-Magazine Capacity: 12, 15 or 20

-Rate Of Fire: 360 Rounds/Minute

-Length: 945 / 920mm (Stock Open / Folded)

[Anghele]

M.A.C| Defense SR-40P

http://i40.tinypic.com/vdh8xs.png

Specifications: (9X19 Parabellum | 9X21IMI | .357Sig| .40S&W | .45GAP | .45 ACP)

Type: Double Action Semi-Automatic pistol

Caliber: 9X19 Parabellum | 9X21IMI | .357Sig| .40S&W | .45GAP | .45 ACP

Weight Unloaded: 625g |655g| 660g | 660g | 735g | 750g

Length: 190mm | 190mm | 190mm| 190mm| 195mm | 195mm

Barrel Length: 116mm| 116mm | 116mm| 115mm| 118mm | 118mm

Magazine Capacity: 10/14/18/24 | 8/12 | 8/12

Price : [9x19,9x21IMI] $1.400 USD [.357SIG,.40S&W,.45GAP] $1.500 USD [.45ACP] $1.670 USD

Description:

The SR-40P pistol is a top quality pistol for military and law enforcement. It was developed by M.A.C to incorporate elements from custom competition pistols with mil-spec engineering, giving elite troops and law enforcement officers a much needed edge. The SR-40P is available in several calibers to fit specific needs and shooters.

Mechanism and Ergonomics:

The SR-40P is a short recoil DAO pistol which uses the link less locking system from the Browning Hi-Power. A double action trigger cocks and releases the hammer, which is then re-cocked by the recoil of every fired round (essentially switching to single action). The pistol is fed from double stack magazines of various capacities. All models come standard with a barrel compensator for improved accuracy in fast shooting.

The SR-40P is fully set up for ambidextrous use, with a frame mounted safety lever on each side. The Magazine release button can be switched to use from either side. A large slide catch is located on the left side of the frame, allowing the quick change of empty magazines. The SR-40P also has a large competition style hammer, and a specially designed polymer frame. The frame is designed for maximum grip and shooting comfort, and has integral Picatinny rails to allow tactical accessories.
The iron sights are standard with a front blade and rear dovetail notch, with tritium dots allowing easier night time shooting.

[Anghele]

M.A.C Heavy Industries | Defense

Presenting the new line of M.A.C-17 Rifles as a direct competitor to the H&K 417.

M.A.C - 17 (Long | Fullsize | Kurz)

http://i40.tinypic.com/6hjmv4.jpg

---------

Specifications :

Caliber: 7.62x51mm NATO

Action: Gas operated, rotating bolt

Overall length (stock collapsed/extended): 10" barrel: 686 / 785 mm; 14" barrel:

Barrel lengths: 10.5" / 267mm; 14.5" / 368mm; 16.5" / 419mm and 20" / 508mm

Weight: 3.61 kg w. 10.5" barrel, 4.2kg w 14.5" barrel

Rate of fire: 900-1300 rounds per minute

Magazine capacity: 10,20 rounds

Price : $3.400 Universal Standard Dollars

[Anghele]

O.A.R-556

http://i41.tinypic.com/2py0xmw.jpg

http://i39.tinypic.com/n4y33s.jpg

http://i43.tinypic.com/350kqd1.jpg

Specifications (O.A.R-556| O.A.R-556 PARA | O.A.R-556 S | OAR-556 ISD):

Type: Assault Rifle/Carbine
Caliber: 5.56X45NATO
Action: Gas operated, rotating bolt.
Overall length/Folded: 1008mm | 958mm/708mm | 815mm/570mm| 1008mm/758mm
Barrel Length: 450mm | 380mm | 280mm | 380mm (Including silencer)
Weight: 4.7kg | 4.13kg | 3.72 kg | 4.50
Rate of Fire: 780 rounds per minute
Magazine capacity: 15/25/30/100
Price per unit: 1500 USD | 1520 USD | 1520 USD| 1980 USD
DPR price: 4,500,000,000 USD

Introduction:

The Oseaton Assault Rifle was developed by Nachmere Precision Systems to meet requirements by the Oseaton Federal Armed Forces. The Federations request was for an assault rifle incorporating the qualities of the FN-FAL and advanced models of the AR-15 design. Due to the problems caused by the attempt to combine such diffrent designs, NPS turned to M.A.C of Anghele. A technlogical partnership agreement between the firms allowed for M.A.C to assist NPS in this project.

Description:

Mechanically wise the rifle incorporates the FN-FAL gas system with the rotating bolt of the AR-15 series. The furniture and ergonomics are also a combination of both successful rifles. Most internal parts are made from aircraft grade aluminium and titanium, while the barrel is made of cold-hammered steel.

The short-stroke gas piston is located above the barrel with a pressure regulator allowing adjustment for adverse conditions. The regulator can also be shut off to allow the use of rifle-grenades. The cocking handle is AR-15 style, linking to the top of the receiver. It can be easily cocked by left and right hand users. When the rifle is fired the piston is pushed back by gas pressure, tapping the bolt group back. This loads a new round form the double stack magazine and the bolt group is pushed back by a recoil spring. This spring is located either in the stock or in the receiver cover in folding versions. The locking is done by an AR-15 style rotating bolt with 7 locking lugs. The ejection window on the right side of the rifle is fitted with a case deflector that ejects spent cases forward, allowing left hand shooters to use the rifle. The trigger group features an ambidextrous, FAL style fire selector. The selector has 4 modes: Safe, Semi-Auto, 3 round burst, and Full-auto. The magazine release button can be switched easily from left to right hand operation.

The rifle comes with standard optical sights, built into the detachable carrying handle. The sights are similar to those fitted on G36. A X3.5 telescope sight for long range shot is located below a X1 red-dot sight for close range reflexive shooting. The carrying handle can be quickly detached and pop-up emergency sights are located on the top of the rifle itself.

Furniture on the O.A.R-556 is made from mil-spec polymers. The rifle has a free floating hand guard with integral picatinny rails. All variants have heightened stocks to allow comfortable use of the sights. A long, FAL style, flash suppressor minimizes the shooters signature.

The O.A.S-556 is fed from proprietary metal or polymer magazines in capacities of 15 to 100 rounds.

Variants:

O.A.R-556: The standard assault version rifle with a fixed stock and long barrel.
O.A.R-556 PARA: A folding stock version with a medium length barrel, intended for use by airborne and mechanized troops.
O.A.R-556 S: A “Shorty” version for special operation forces, tank crews, and other users in need of a compact and concealable package.
O.A.R-556 SD: Identical to the "S", the "SD" also has an NPS detachable sound supressor. It retails for the same price as the "S" version.
O.A.R-556 ISD: An integrally suppressed version using a non detachable sound suppressor. The ISD has a lower sound signature than 9mm integrally silenced SMGs like the MP-5SD Intended for special operations forces in need of a silent and concealable fully automatic weapon.

[The Ben Boys]

Hmm I wonder why no one has replied...
But the Ben Boys have ten of millions in the arms industry, so no thanks.

[Anghele]

Hmm I wonder why no one has replied...
But the Ben Boys have ten of millions in the arms industry, so no thanks.

OOC : Maybe because you should learn how to read.

This is the reference post.

This is not the main storefront.The main storefront is here : viewtopic.php?f=6&t=3270

And I didn´t say I would like to sell you anything,did I? You have "tens of millions"?Ok,I have hundreds of billions invested in M.A.C | Defense,I believe that this surpasses you just a little bit.

[Anghele]

M.A.C Heavy Industries | Defense O.A.R-762 Series of Rifles

http://i44.tinypic.com/svop03.jpg

Specifications : (O.A.R-762| O.A.R-762 PARA | O.A.R-762 S | O.A.R-762 ISD):

-Caliber: 7.62X51NATO

-Action: Gas operated, rotating bolt.

-Overall length/Folded: 1008mm | 958mm/708mm | 815mm/570mm| 1008mm/758mm

-Barrel Length: 450mm | 380mm | 280mm | 380mm (Including silencer)

-Weight: 4.9kg | 4.20kg | 3.92 kg | 4.70

-Rate of Fire: 980 rounds per minute

-Magazine capacity: 10/20/800

-Price per unit : $1.800 USD | $1.820 USD | $1.920 USD| $2.280 USD

-Domestic Production Rights : $6,500,000,000 USD

Description:

Mechanically wise the rifle incorporates the proven FN-FAL gas system with a modified and reinforced rotating bolt of the AR-10 series. The furniture and ergonomics are also a combination of both successful rifles. Most internal parts are made from aircraft grade aluminum and titanium, while the barrel is made of cold-hammered steel.

The shot-stroke gas piston is located above the barrel and has it´s own return spring,the gas piston features a pressure regulator that allows adjustment ranging from optimum to adverse conditions. The gas pressure regulator can also be completely shut off to allow the use of rifle-grenades.

The cocking handle is reinforced and of AR-10 style, linking to the top of the receiver. It can be easily cocked by left and right hand users. When the rifle is fired the piston is pushed back by gas pressure,tapping the bolt group back. This loads a new round form the double stack magazine and the bolt group is pushed back by a recoil spring.
This spring is located either in the stock or in the receiver cover in folding versions. The locking is done by an AR-10 style rotating bolt with 8 very strong locking lugs. The ejection window on the right side of the rifle is fitted with a case deflector that ejects spent cases forward, allowing left hand shooters to use the rifle.

The trigger group features an ambidextrous, FAL style fire selector. The selector has 4 modes: Safe, Semi-Auto, 3 round burst, and Full-auto. The magazine release button can be switched easily from left to right hand operation.

The rifle comes with standard new generation dual optical sights, built into the detachable carrying handle. The sights are similar to those fitted on H&K G36. A x3.5 amplification sight for long range shots is located below the x1.5 red-dot sight for close range reflexive shooting. The carrying handle can be quickly detached and pop-up emergency sights are located on the rails on top of the rifle itself.

The furniture on the O.A.R-762 is made from mil-spec "rubberized" polymers. The rifle has a true free floating hand guard with integrally mounted picatinny rails. All variants have heightened stocks to allow comfortable use of the sights. A long, FAL style, flash suppressor minimizes the shooters signature.

The O.A.R-762 is fed from proprietary metal or polymer magazines in capacities of 10 to 30 rounds.100 round drums are also available.

Variants:

-O.A.R-762: The standard assault version rifle with a fixed stock and long barrel.

-O.A.R-762 PARA: A folding stock version with a medium length barrel, intended for use by airborne and mechanized troops.

-O.A.R-762 S: A “Shorty” version for special operation forces, tank crews, and other users in need of a compact and concealable package.

-O.A.R-762 SD: Identical to the "S", the "SD" also has an NPS detachable sound supressor. It retails for the same price as the "S" version.

-O.A.R-762 ISD: An integrally suppressed version using a non detachable sound suppressor. The ISD has a lower sound signature than 9mm integrally silenced SMGs like the MP-5SD Intended for special operations forces in need of a silent and concealable fully automatic weapon.

[Anghele]

X.A.C.R - 30 | .30 Carbine

http://i31.tinypic.com/n5fn87.jpg

Specification:

-Type: Compact Carbine | C.Q.B/C.Q.C Personal Defense Weapon

-Caliber: .30 Carbine

-Action: Gas operated,rotating bolt.

-Overall length: 655mm

-Barrel Length: 425mm

-Weight, empty: 3.1 kg

-Rate of Fire: 1112 rounds per minute

-Magazine capacity: 10/20 rounds

-Price per unit: $2.880 USD

-DPR price: $6,500,000,000 USD

---

X.A.C.R-30 Description:

The X.A.C.R-30 functions on a highly reliable,self-regulating and self-cleaning gas operated long-stroke piston design.

The side-cocking handle is not connected to the bolt carrier,thus it remains stationary during shooting.It is ambidextrous and can be easily cocked by left and right hand users.

The large piston is connected to the bolt and moves in the wider and enlarged gas chamber located above the weapon barrel. The bolt itself has three lugs for enhanced locking. Extracted shells are directly pushed into a channel and fall downwards through an ejection port behind the pistol grip, allowing safe ambidextrous shooting.

The trigger group features an ambidextrous fire mode selection lever with safe, semi auto and fully automatic burst modes. The magazine release lever is ambidextrous.

The main body of the X.A.C.R-30 is manufactured from high grade military polymers with all internal parts being made in specialized steel,the remaning furniture,such as cheek rest and butt plate are made from highly resistant impact rubber/polymer mixture.

The rifle has integral picatinny rails on the carrying handle, and the sides and bottom of the foregrip.

The carrying handle is attached to the barrel and so makes and extremely stable mount for optic sights,it also features integral iron sights.

The X.A.C.R is fed from proprietary metal or polymer magazines in capacities of 10 or 20 rounds.

The X.A.C.R is one of the most resistant and reliable weapons produced by M.A.C | Defense,it´s polymer construction renders it almost indestructible,leaving the famous Avtomat Klashnikova 47 far behind the X.A.C.R when it comes to reliability and acuraccy.

---

M.A.C Heavy Industries | Defense Management.

[Mossat]

((OOC: I'm confused, as some of these weapons do not have purchasing costs, such as the M.A.C-16,-17 and SR-40 weapons. Can this be corrected somehow or am I missing something really big?))