Key Data
Cost: $150 NSD per multi-tool. No DPR.
Closed length: 12.4 cm.
Blade Length: 7.31 cm.
Weight: 316.3 g.
Features
- High-Carbon (HC) 435 Stainless Steel.
- High-Carbon (HC) 360 Stainless Steel.
- Black Oxide Coating.
- Bronze polish (certain tools, explained bellow).
- Handle Bit Storage.
- Replaceable Pocket Clip.
- Outside-Accessible Features.
- Single-Handed Features.
- Included Black (or Brown) Sheath Case.
Tools
- Needlenose Pliers.
- Stranded-wire Cutter.
- Replaceable HC360 Stainless Steel Fuse-wire Cutter.
- Military Performance Spec Cap Crimper.
- Electrical Crimper.
- HC435 Combo Knife (half strait half serrated).
- HC435 Saw.
- Replaceable Cutting Hook.
- Hammer.
- Bolt Override Tool.
- Replaceable C4 Punch.
- Replaceable Bronze Carbon Scraper.
- #8-32 Cleaning Rod/Brush Adapter.
- Carabiner/Bottle Opener.
- Large Nail/Other File.
- Large Bit Driver.
The Wolf Fang Multipurpose Tool, or Wolf Fang Multi-Tool, is a military oriented multipurpose tool featuring many tools and features. Designed for the common soldier and the specialists out there; Wolf Fang has many tools that are meant to assist soldiers with everyday tasks on and off the battlefield. EOD - Explosives Ordinance Disposal - personnel will especially find this tool very reliable with its many EOD centered tools. Designed by a former EOD expert inside Wolf Armaments, Wolf Fang was meant to provide his country and its servicemen in TECT with a reliable set of tools for the specialists and infantryman.
Features include use of special high-carbon steel construction; 435 and 360 stainless steel are improved upon grades of stainless steel that feature a higher carbon build, making it lighter without removing the quality. Black Oxide is used standard as a coating for Wolf Fang - its additional metal and smooth design doubles the multi-tool's comfort use. Bronze is used for the Bronze Scraper tool, which was chosen because slightly softer metal is preferred so that the tool won't scar other parts during use. Handle bit storage is also located on the exterior of the multi-tool for better access and efficient storage when not in use. A sheath comes customary with the Wolf Fang Multi-Tool; removing the pocket clip will let you store the Wolf Fang in the sheath, or if preferred, keep the clip to attache the multi-tool to the pocket or belt - as preferred by the user.
Beginning with the head; the needlenose plier features a grip for tight holds and is built with HC435. Bellow it is the Military Performance Spec Cap Crimper, a blasting cap crimper for C4 explosive fuses that is up to military performance standards. Replaceable bypassing cutting blades are bellow that on the pivot ball - it is crafted from HC360 and is meant for cutting detonation cord/time fuses for C4 explosives among many other thick cord like material. The exterior of the pliers features adapters for cleaning rods and brushes; for firearm cleaning kits with an 8mm diameter or bellow and thirty two threads per inch, includes both male and female receivers. Where the joint meets between the arms is the Electrical Crimper and Standard Wire Cutter; these are for general purpose crimping of electrical connectors and cutting general purpose wires. The concave shape of the wire cutter helps to keep the shape of the strands without crushing them.
On the left arm (side with the hammer) is the Bronze Carbon Scraper, C4 Punch, Carabiner/Bottle Opener, Bolt Override Tool, Cutting Hook, and Hammer. The replaceable Scraper and Punch are located in the arm for storage when not in use - the Carabiner clip is located above for use of clipping to belt loops or straps, and can pop open most beverages. Above is the hammer; for hammering in stakes or striking nails, it's textured end is designed to reduce contact slippage. On the same surface is the Bolt Override Tool, used for AR platforms when a round is jammed inside the bolt; the case can be removed by removing the magazine, placing this stainless steel hook into the ejection port, and pulling back sharply. The right arm features the Combo Knife, Saw, large Nail File, and Large Bit Driver. The combo knife is half straight and half serrated, made of HC435, and intended for multiple uses, like precise cuts and cutting through rougher material. The Saw, made of the same HC435, is designed to work on a pull motion, which requires less effort and has less propensity for breakage - the open-tooth design keeps the saw from filling up with material, allowing the user to complete a job without pausing to clean the tool. The Nail File is used to file down material such as wood and hard surfaces. Finally; the large Bit Driver slots full-size tool bits in place and allows the user to exchange bits for different jobs.
Export
The Wolf Fang is available for purchase on the Wolf Armaments storefront page. $150 NSD per unit, bits and sheath included with no charge.