If you want a seal or logo

[Tectonix]

I request a seal for my federal Department of Scientific Advancement. Take into account the centre emblem on the flag and possibly an atom and flask.

Thank you so much! It looks great

[North Tandua]

I would like a national seal for my country. I want two raised fists (similar to the one on my flag) holding a hammer and sickle. The phrase "From each according to ability, to each according to need" should be written in Russian on a banner near the bottom. Use the colors red, black, and gold. The red and black would preferably be the same shade as on my flag. Thanks in advance.

P.S. I would appreciate it if you used source more accurate than Google translate for the Russian.

[Demetland]

Hey, buckle up and feel free to say hell naw to the naw naw naw at this request because shizzle is about to get symbolic and complicated.

So I'm going to need two things, but one is an extension of the other so all is well. Firstly, I'm going to need a royal family crest:

https://upload.wikimedia.org/wikipedia/ ... 29.svg.png

And I'm going to need a smaller variation centred around the belt, like this:

https://upload.wikimedia.org/wikipedia/ ... 29.svg.png

The designs should be uniform. What of the design? Well, scrap the inner workings of the shield, the shape will do and instead insert a layered cross much like the flag of Norway, centred (so not Nordic) but with the colour tyrian purple (#66023C) as the background, with a white cross next, and then a golden cross (#FFD700) in the very inner section.

Both designs should retain the belt with a thin golden (#FFD700) outer colour, holes, and buckle and the inner section should also be tyrian purple (#66023C). The writing must be heraldic and also golden (#FFD700) and read "PATER PRO FILIO SUO", with the first of those words centred and at the top of the belt, under the crown, the rest of the words trailing in a clockwise motion.

In terms of the larger crest, it is well enough to remove the bottom motto banner and simply replace the animals with two identical heraldic bulls, I'm unsure of the colour, perhaps a nice brown.

If this is too difficult an undertaking you are welcome to create your own design as long as the specified colours, animals and motto are present.

Thank you,

Jago.

If you don't like the compartment (in this case, the fern underneath the shield) it can be swapped for a different one.

[Corindia]

I would like a national seal for my country. I want two raised fists (similar to the one on my flag) holding a hammer and sickle. The phrase "From each according to ability, to each according to need" should be written in Russian on a banner near the bottom. Use the colors red, black, and gold. The red and black would preferably be the same shade as on my flag. Thanks in advance.

P.S. I would appreciate it if you used source more accurate than Google translate for the Russian.

If you want anything more than google translate you're going to have to supply it

[North Tandua]

I would like a national seal for my country. I want two raised fists (similar to the one on my flag) holding a hammer and sickle. The phrase "From each according to ability, to each according to need" should be written in Russian on a banner near the bottom. Use the colors red, black, and gold. The red and black would preferably be the same shade as on my flag. Thanks in advance.

P.S. I would appreciate it if you used source more accurate than Google translate for the Russian.

If you want anything more than google translate you're going to have to supply it

That's fair - "От каждого по способностям, каждому по необходимости"

[Corindia]

Can I get a red star with yellow edges and with a war elephant in the middle?

[Corindia]

If you want anything more than google translate you're going to have to supply it

That's fair - "От каждого по способностям, каждому по необходимости"

http://i.imgur.com/nYrwD6C.png

[Al Ashabiyah]

I really like it. Could I possibly request some changes though? Please put the Iraq flag I linked to with those changes in the Middle shield, and replace the hammer and sickle with جمهوريه الشعبيه? And shrink the stars on the text banner. Thanks!

Don't worry about this request, I have done it

[Hirvania]

Hello.

I need a logo for a political party. The name of the party is the "DEUN Progressive Party". The logo should have only the name of the party in a style that looks beautiful, in italics, colorful (not too much, I want at least two different colors for the letters) and the "s" letters must look like the dollar sign ($)

Thank you in advance. If it is difficult to make or my request is not clear tell me.

[Ludzirgreb]

May you someone from here please make me a seal?
It is an eagle in the middle and with an iron cross in the middle. Below that, the eagle holds a banner saying "Fur Immer Leben Wir!" All surrounded by a wheat wreath.

[Jerusal]

Could someone please make a circular logo for me? It should be the same Gray as my flag, a white outline, with white lettering and the torch from my flag as the symbol in the center? The top part say "Central Command", and the bottom "To defend and uphold"? Thanks for your time.

[Demetland]

May you someone from here please make me a seal?
It is an eagle in the middle and with an iron cross in the middle. Below that, the eagle holds a banner saying "Fur Immer Leben Wir!" All surrounded by a wheat wreath.

and with wreath

[Ludzirgreb]

May you someone from here please make me a seal?
It is an eagle in the middle and with an iron cross in the middle. Below that, the eagle holds a banner saying "Fur Immer Leben Wir!" All surrounded by a wheat wreath.

and with wreath

Hey, that's pretty good!
Thank you.

[Noronica]

Hello,

Could someone please make an insignia for my armed forces?
My country is one with a pseudo-monarchy called an Overlord/lady. They wear a badge that looks like this to signify their position;

I imagine that the insignia would look something like this;

Could I also request that a motto be included;

"Fortis in infirma" - strong for the weak

If you could do this, I'd be very grateful!

[Asimov Directorate]

I would like a flag for my nation. It needs to be a gray, dull red, and dull orange background (tricolor horizontal) with a black atomic signal in the middle. Thank you.

[Demetland]

Hello,

Could someone please make an insignia for my armed forces?
My country is one with a pseudo-monarchy called an Overlord/lady. They wear a badge that looks like this to signify their position;

(Image)

I imagine that the insignia would look something like this;

(Image)

Could I also request that a motto be included;

"Fortis in infirma" - strong for the weak

If you could do this, I'd be very grateful!

The motto is 'The strong (ones) for the weak (ones).'

[Noronica]

Hello,

Could someone please make an insignia for my armed forces?
My country is one with a pseudo-monarchy called an Overlord/lady. They wear a badge that looks like this to signify their position;

(Image)

I imagine that the insignia would look something like this;

(Image)

Could I also request that a motto be included;

"Fortis in infirma" - strong for the weak

If you could do this, I'd be very grateful!

The motto is 'The strong (ones) for the weak (ones).'

Thank you so much! This is exactly what I needed for my Armed Forces!

[Demetland]

(Image)

The motto is 'The strong (ones) for the weak (ones).'

Thank you so much! This is exactly what I needed for my Armed Forces!

Pleased you like it!

[Noronica]

Hello,

Would it be possible to make a design for a Defence Corporation that sells military equipment?

It's a big corporation and sells on a national level.

It is a very nationalistic corporation so the design should follow my flag design somewhere in it;

Thanks guys!

[Greater Slavic Union]

I would like to have a seal for my armed forces.
The motto is "Forwads! For The Glory of the Slavic People!", in english, but the original version is "Vpřed! Pro Slávu Slovanského Národu!" The original version MUST be on the logo, while the english one... that's up to you wether you like it or not.

It is a soviet-like military, with many armoured units, and many tanks.


I also ask for you to put the Slavic Eagle into it.


Thanks

[Republic of Greater Cuba]

I would like to have a logo for a political party

It would have the symbol of the three pillars wrapped around a wreath with a text beneath it that reads Et novam aetatem incipit.

If I could also ask that you remove the box surronding the symbol that would be very great, but if you can't them I am fine with it

I would be extremely grateful if anyone did this

[The Canadian North-West]

I would like to request a Coat of arms type thing, not for this nation but for one which contains modern day Israel, Palestine, Cyprus, and Lebanon, which features prominently the Ark of the Covenant. Above the Ark, please put אומה אחת, and below it, עמים רבים.
In addition, this symbol should also be on the front of the Ark:

]

If someone could do this for me, I would be extremely thankful!

[Demetland]

Deleted.

[Demetland]

Hello,

Would it be possible to make a design for a Defence Corporation that sells military equipment?

It's a big corporation and sells on a national level.

It is a very nationalistic corporation so the design should follow my flag design somewhere in it;

(Image)

Thanks guys!

What's it called?

I would like to have a seal for my armed forces.
The motto is "Forwads! For The Glory of the Slavic People!", in english, but the original version is "Vpřed! Pro Slávu Slovanského Národu!" The original version MUST be on the logo, while the english one... that's up to you wether you like it or not.

It is a soviet-like military, with many armoured units, and many tanks.


I also ask for you to put the Slavic Eagle into it.


Thanks

I would like to request a Coat of arms type thing, not for this nation but for one which contains modern day Israel, Palestine, Cyprus, and Lebanon, which features prominently the Ark of the Covenant. Above the Ark, please put אומה אחת, and below it, עמים רבים.
In addition, this symbol should also be on the front of the Ark:

(Image)]

If someone could do this for me, I would be extremely thankful!

Also, Canadian North-West, the previous version had a white background so here's a corrected version.

[Greater Slavic Union]

Hello,

Would it be possible to make a design for a Defence Corporation that sells military equipment?

It's a big corporation and sells on a national level.

It is a very nationalistic corporation so the design should follow my flag design somewhere in it;

(Image)

Thanks guys!

What's it called?

I would like to have a seal for my armed forces.
The motto is "Forwads! For The Glory of the Slavic People!", in english, but the original version is "Vpřed! Pro Slávu Slovanského Národu!" The original version MUST be on the logo, while the english one... that's up to you wether you like it or not.

It is a soviet-like military, with many armoured units, and many tanks.


I also ask for you to put the Slavic Eagle into it.


Thanks

I would like to request a Coat of arms type thing, not for this nation but for one which contains modern day Israel, Palestine, Cyprus, and Lebanon, which features prominently the Ark of the Covenant. Above the Ark, please put אומה אחת, and below it, עמים רבים.
In addition, this symbol should also be on the front of the Ark:

(Image)]

If someone could do this for me, I would be extremely thankful!

Also, Canadian North-West, the previous version had a white background so here's a corrected version.

Děkujů moc krát